NUOBODUS

TOS 100A

Sąlyga: geras (naudotas), Gamybos metai: 1990, X ašies eiga: 1 600 mm, Y ašies eiga: 1 120 mm, Z ašies eigos atstumas: 1 250 mm, stalo apkrova: 3 000 kg, ašies skersmuo: 100 mm, stalo ilgis: 1 500 mm, stalo plotis: 1 500 mm, X ašies padavimo greitis: 2 800 m/min, Y ašies padavimo greitis: 2 800 m/min, padavimo greitis Z ašis: 2 800 m/min, sukimosi greitis (min.): 1 120 aps./min, X ašis: 1600 mm Y ašis: 1120 mm Z ašis: 1250 mm W ašis: 900 mm Stalo ilgis: 1500 mm Stalo plotis: 1500 mm Stalo apkrova: 3000 kg Sukimosi greitis: 1120 aps./min. Galia: 11 kW Įrankio tvirtinimas: 50 ISO/BT/MK X ašies pastūma: 2800 mm/min. Njdjycvc Sopfx Af Ijcl Y ašies pastūma: 2800 mm/min. Z ašies pastūma: 2800 mm/min. W ašies pastūma: 2800 mm/min. Ilgis: 6710 mm Plotis: 3000 mm Aukštis: 3000 mm Svoris: 14000 kg Atkreipkite dėmesį: visa šiame puslapyje pateikta informacija surinkta pagal mūsų žinias bei, kiek įmanoma, gauta iš gamintojo. Ši informacija pateikiama sąžiningai, tačiau negalime garantuoti jos tikslumo. Dėl šios priežasties jos nelaikytinos nei atstovavimu, nei sutartinėmis sąlygomis. Rekomenduojame patikrinti visus svarbius duomenis.

Sąlyga: geras (naudotas), Apvalaus plieno pjovimo diapazonas ties 45°: 250 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 280 mm, pjovimo aukštis (maks.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Mitre angle: 0 - 60º Nedpfx Afett Nd Re Iocl Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, bendras svoris: 70 kg, ašių skaičius: 5, Šis 5 ašių TOS VARNSDORF W 100 A buvo pagamintas 1999 m. Jis veikia esant 3PE ~ 400 V įtampai, 50 Hz dažniui ir 22 A srovei. Mašinos galia - 15 kVA, o svoris - 70 kg. Apsvarstykite galimybę įsigyti šį TOS VARNSDORF W 100 A horizontalųjį apdirbimo centrą. Susisiekite su mumis dėl išsamesnės informacijos. Njdpfoyblnujx Af Iocl • Įtampa: 3PE ~ 400 V • Dažnis: 50 Hz • Srovė: 22 A • Galia: 15 kVA • Valdymo įtampa: 24 V

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, X ašies eiga: 3 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 400 mm, Šis 3 ašių TOS KUŘIM FS 100 S/A3 vertikalusis apdirbimo centras buvo pagamintas 2002 m. Apsvarstykite galimybę įsigyti šį TOS KUŘIM FS 100 S/A3 vertikalaus apdirbimo centrą. Norėdami gauti daugiau informacijos, susisiekite su mumis. Papildoma įranga • Papildoma dokumentacija: Yra vartotojo vadovas Mašinos privalumai Techninės mašinos privalumai • Pastūmos greitis: standartinis: nuo 1 iki 5000 mm/min / greitoji eiga (y ir z ašys): 10 m/min. / pastūmos greitis: 12 m/min • Darbinis stalas: dydis: 1000 x 3000 mm / maksimalus ruošinio svoris: 7000 kg / t formos griovelių skaičius: 7 / atstumas tarp t griovelių: 140 mm / t formos griovelio plotis: 22 mm / stalo aukštis nuo pagrindo (grindų): 900 mm Ncedpfx Afsyar A Aj Isl • Suklis: veleno kūgis: iso 50 / veleno skersmuo prie priekinio guolio: 85 mm / minimalus atstumas nuo veleno iki darbo stalo: 125 mm / maksimalus atstumas nuo veleno nuo darbo stalo: 1775 mm / suklio greitis: nuo 16 iki 3500 aps. /min (be laipsnio)

Sąlyga: naujas, The KNUTH Sinus 400/1500 D is a robust universal lathe from the category of conventional lathes, renowned for its high processing efficiency. Featuring a one-piece, heavy cast-iron bed and a spindle bore of 105 mm, this machine is ideal for machining long workpieces or large flanges. Technical highlights include a removable gap for workpieces with a diameter of up to 1035 mm, high precision and smooth running, as well as rapid traverse in two axes for fast positioning. Safety features such as overload protection and automatic lubrication of the main spindle ensure reliable operation. The manual design provides a direct power transmission between motor and spindle, which increases performance. If you are interested in the Sinus 400/1500 D, you can now submit an inquiry or request further information about this universal lathe in the conventional lathe category. Nedpfx Afsq Rdp Ae Iscl

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 1 000 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 15 m/min, X ašies padavimo greitis: 5 m/min, Y ašies padavimo greitis: 5 m/min, padavimo greitis Z ašis: 5 m/min, sukimo momentas: 1 200 Nm, valdiklių gamintojas: SIEMENS SINUMERIK 840D, ruošinio svoris (maks.): 18 000 kg, bendras aukštis: 4 950 mm, bendras ilgis: 10 270 mm, bendras plotis: 5 640 mm, stalo plotis: 1 000 mm, stalo aukštis: 800 mm, stalo ilgis: 6 000 mm, stalo apkrova: 18 000 kg, sukimosi greitis (min.): 16 aps./min, sukimosi greitis (maks.): 3 200 aps./min, bendras svoris: 21 000 kg, veleno greitis (maks.): 3 200 aps./min, ašies variklio galia: 22 000 W, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, FFQ 100W-A6(A8) CNC - TOS KUŘIM Machining centre, table length 6m (8m) Control system: Siemens 840 C Availability: according to selected refurbishment level Warranty: according to selected refurbishment level Available as used, after partial overhaul, or after complete overhaul including modernization. FFQ 100W-A6(A8) CNC – Technical specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 10,270 mm Overall width: 5,640 mm Overall height: 4,950 mm Total weight: 21,000 kg Total power requirement: 40 kVA Working range: Longitudinal travel X-axis: 4,000 mm (6,000 mm) Cross travel Z-axis: 1,000 mm Vertical travel Y-axis: 1,400 mm Horizontal spindle head with extending quill: Taper: ČSN 22 0433 / ISO 50 Max. power: 22 kW Spindle speed range: 16 – 3,200 rpm Number of speed steps: stepless Max. torque: 1,200 Nm Quill diameter: 170 mm Quill stroke: 400 mm Quill feed range: 1 – 2,000 mm/min Quill rapid feed: 4,000 mm/min Max. quill feed force: 10,000 N Spindle head (IPS head): Taper: ČSN 22 0433 / ISO 50 Max. power: 22 kW Spindle speed range: 16 – 3,200 rpm Number of speed steps: stepless Max. torque: 1,200 Nm Milling H-V, spindle can be automatically swiveled to vertical or horizontal position Feed range X – Y / Z: Number of steps / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 1,000 x 6,000 mm (8,000 mm) Max. load: 3,000 kg/m2 Tool magazine: Number of positions: 40 Control system: SIEMENS 840 C Nsdpsxp Iz Ssfx Af Ijcl Details on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, CN Heidenhain TNC 430 PA Maximum spindle torque: 900 Nm Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table: 1,000 × 14,000 mm Number of T-slots in the table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Nodpfoxdwkfsx Af Iscl Minimum distance between the horizontal spindle axis and table surface: 275 mm Maximum distance between the horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Minimum distance between the vertical spindle face and the table: 50 mm Maximum distance between the vertical spindle face and the table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in spindle: 16,500 N Main machine dimensions: Length: 17,850 mm Width: 5,640 mm Width with guarding: 6,720 mm Height: 4,350 mm Floor space: 73 m² Total machine weight: approx. 34,000 kg Electrical cabinet weight: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be installed by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Ncjdpfx Ajfqpxief Iol Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, sukimo momentas: 1 200 Nm, valdiklių gamintojas: Heidenhain iTNC 426, ruošinio svoris (maks.): 9 000 kg, bendras aukštis: 3 320 mm, bendras ilgis: 9 660 mm, bendras plotis: 4 918 mm, veleno greitis (min.): 11 aps./min, veleno greitis (maks.): 2 500 aps./min, The machine is currently disassembled and undergoing repair to the following extent: - Complete disassembly and cleaning - Inspection of all components - New Tribotec lubrication unit - Overhaul of the independent balancing circuit of the console - Milling head "O" – complete overhaul including replacement of gears - Replacement of gearbox bearings - Replacement of belts - Repair of ball screws and their bearings - Resealing of hydraulic circuits throughout the machine and replacement of solenoid valves - Addition of automatic lubrication for the gears in the milling head - Resealing of all hydraulic cylinders and modernization of seals - Overhaul of the hydraulic unit - Overhaul of Indramat feed motors and spindle motor - Repair and adjustment of Indramat drives - Refurbishment of the electrical cabinet with control elements - Replacement and modernization of limit switches throughout the machine - Repair or replacement of cabling for the Heidenhain system and TNC 426 - Refurbishment of the control panel - Overhaul of the Heidenhain control system and TNC 426, including keyboard and display unit - The machine will be fully functional with geometrical accuracy certified by a protocol - New coating of the machine in RAL 5005 and RAL 9010 colour scheme Technical Data of the Machine Maximum spindle torque: 1200 Nm Maximum feed force in X, Y, Z axes: 20,000 N Maximum workpiece weight: 9,000 kg Table surface: 1,000 x 4,000 mm Number of T-slots / pitch: 7 / 140 mm T-slot width: 24H7 mm Table height from base: 900 mm Ncsdpfx Afjxnkkas Ijl Longitudinal travel "X": 4,000 mm Cross travel "Y": 1,000 mm Vertical travel "Z": 900 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Maximum distance from horizontal spindle axis to table clamping surface: 1,500 mm Minimum distance from vertical spindle nose to table clamping surface: 130 mm Maximum distance from vertical spindle nose to table clamping surface: 1,030 mm Distance from horizontal spindle nose to inside edge of table: 80 mm Distance from vertical spindle axis to inside edge of table: 100 mm Spindle taper: ISO 50 Clamping force of drawbar: 16,100 N Horizontal spindle swiveling - both directions: 180° Vertical spindle swiveling - both directions: 180° Spindle head positioning: adjustable in 2.5° increments Usable main drive motor power: 22 kW Spindle speed range: 11 ÷ 2,500 rpm Number of speed steps: stepless Feed rate range: 1 ÷ 5,000 mm/min Rapid traverse in Y, Z axes: 10 m/min Rapid traverse in X axis: 10 m/min Machine available for delivery at the end of 2025.

Sąlyga: geras (naudotas), Gamybos metai: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa Ncedoxflxaspfx Af Iol TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control unit: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel range X-axis: 300 mm Travel range Y-axis: 300 + 100 mm Travel range Z-axis: 330 mm Rapid traverse in X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Connected load: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - Coolant pump and chip tray The precise scope of supply is as per the photo documentation. The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel ranges of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, this machine offers versatile machining capabilities. The tool changer with 21 positions ensures flexible production processes and minimizes setup times. The spindle reaches speeds up to 10,000 rpm, enabling both fine finishing operations and high-performance machining to be carried out efficiently. The Fanuc Series 31i-Model A5 control unit facilitates comfortable and reliable programming. Thanks to a maximum workpiece load of 200 kg and its compact footprint, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness or currentness of the information provided.