Radialinio gręžimo staklės

TOS / MAS VO 50

Sąlyga: visiškai atnaujintas (naudotas), Hosokawa Mikropul ACM 10 Fine Impact Mill / Classifier Mill with New Control Cabinet and Accessories We are offering a Hosokawa Mikropul ACM 10 fine impact mill in excellent condition—an ideal solution for precise grinding and classification of powders and granules. Technical Data: • Model: ACM 10 • Motor Power: 9.2 kW • Condition: Excellent (completely overhauled), with a newly built control cabinet Additional Information: • Classifying Screen Available: A suitable classifying screen is also in stock. Rsdpfx Aovn Riajgijp • Comparable Mills: We have similar/analog mills in stock that operate on the same principle as the ACM 10. Advantages of the ACM 10: • Compact Design: Saves floor space in your production area • Energy Efficient: Optimized for reduced power consumption • Versatile: Suitable for processing chemicals, food products, pharmaceuticals, and more Condition and Inspection: The machine is ready for immediate use and can be inspected by appointment. We also offer technical accessories and spare parts for seamless integration into your production line. Contact us for further information or a customized quote.

Sąlyga: labai geros būklės (naudotas), Pressure: 0.5 – 20 t Workpiece diameter - max.: 5 – 75 mm Thread length: 2000 mm Rodpfxevpaa Re Agiep Pitch in mm: 8 mm Rolling spindle holder diameter: 69.85 mm Tool diameter: 200 mm Rolling spindle speeds: 20 – 90 rpm Stroke: 0 – 20 mm Total connected load: 7.5 kW Machine weight: approx. 3.1 t Space requirements: approx. 1.9 x 1.1 x 1.2 m

Gamybos metai: 2009, Sąlyga: geras (naudotas), Lifting capacity: 30 t Redoqiz N Rjpfx Agiop Precision lift Lifting height: 9 meters

Sąlyga: labai geros būklės (naudotas), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Redswgizdspfx Agisp Spindle speeds - stepless: 45 - 450 rpm Machine weight approx. 12.5 t Space requirement approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by a specialist workshop. The existing milling head was replaced with an overhauled universal milling head. Equipment: Differential for oblique machining Automatic indexing device (indexing plates interchangeable!) for multi-keyed, multiple-start parts, plus extensive bushings, support rollers, and about 70 change gears. Conversion of milling head speed to a frequency converter with a correspondingly powerful motor is a great feature and saves a lot of setup time. Accessories: About 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller holders, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Rsdpfx Aenzpx Rsgiop - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Rsdpfx Agsk Hdu Dsijp X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed range: 63 - 3,150 rpm Infinitely variable feed: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with path control, mechanical handwheels, rotatable tilting table +/- 45°, hydraulic tool clamping, semi-enclosure, coolant tank, manual

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. Rodpehzbipefx Agiep *Installation layout available upon request.

Sąlyga: paruoštas naudoti (naudotas), bendras aukštis: 3 300 mm, bendras plotis: 3 450 mm, bendras ilgis: 6 000 mm, valdiklių gamintojas: Siemens, tuščias svoris: 17 000 kg, Modelis: FTV 850 Vėsinimas per špindelį Darbo sritis gali būti padalinta į dvi dalis 2 magnetiniai stalai Judanti kolona, panaši į Mazak VTC / Unisign / Hedelius Tvirta važiuoklės konstrukcija Išilginis X ašies eigos ilgis: 1800 mm Skersinis Y ašies eigos ilgis: 850 mm Z ašies eiga (aukštis): 800 mm Prispaudimo zonos matmenys – stalas: 2300 x 900 mm Universalus (2x 360°): ISO 50 Gręžimo galva (1 x 90°): 19 kW Rjdpfxswxz D Us Agijp

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, Atstumas tarp centrų: 650 mm Vidinis / išorinis diametras Rsdpfjwu Tdfjx Agijp 2 ašių SONY skaitmeninis atvaizdavimas Aušinimo skysčio bakas

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Pavaros Y ašies eiga (8) 20 - 360 mm/min Z ašies eiga 600 mm/min Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Pagrindinio variklio galia 4 kW Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. Rjdpfenfu Riox Agiop komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!