Jūrų konteineris

TC Containerhandel 20-Fuß Container ROTTERDAM

Gamybos metai: 1994, Sąlyga: geras (naudotas), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Good condition, fully functional. The machine can be inspected and tested under power on site. International shipping available. Inspection: Lhedek Ixl Ajpfx Abker As a general note, to avoid any misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the telephone number listed below or above at any time. Subject to prior sale and errors in description. VAT will be stated separately on my invoices. Shipping via freight forwarder.

Gamybos metai: 1989, Sąlyga: labai geros būklės (naudotas), Item number: MA1060 Manufacturer: Fasti Model: 509/40/6 Year of manufacture: 1989 Machine no.: 5888 Control unit: Omron (renewed in 2012) Length [mm]: 4850 Lsdpfxod Ac D Rj Abkohr Width [mm]: 2450 Height [mm]: 2100 Weight [kg]: 10,900 Connected load: 380V / 16.5 kW Working area [mm]: 4000 Max. sheet thickness [mm]: 6 Blade length: 4000 mm Front gauge: 5000 mm / Rear gauge: 1000 mm Accessories: Manuals / Circuit diagrams

Sąlyga: naujas, Gamybos metai: 2025, Quick miter adjustment from 30° to 150°, stepless, with 0.5° accuracy according to the scale. The miter pivot point is at the intersection of the saw band and the material stop, so there is no change in length measurement. End stops at 30° & 45° left and 30° & 45° right. Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure reduction by the own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section via hydraulic damping cylinder. Standard equipment with coolant unit, which can optionally be supplemented with a micro-dosing system. Ledpfx Abjbi S Dijkehr Machine base with chip tray. Saw band drive with end-of-stroke switch. Precision saw band carbide-roller guides. Painted silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw band mounted on the machine, 4/6 TPI. Operating manual and spare parts list on CD-ROM. Special equipment: Hydraulic lifting of the saw frame. Execution: Manual Miter capacity: 30° left: Ø 130mm; square 120x120mm 45° left: Ø 200mm; square 180x180mm 90°: Ø 260mm; square 300x260mm 45° right: Ø 200mm; square 180x180mm 30° right: Ø 130mm; square 120x120mm Motor: [kW] 1.8 Saw band: [mm] 3350x27x0.9 Saw band speed: 35/75 m/min Working height: [mm] 900

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024,

Sąlyga: naujas, The Turnado 230/2000 is a state-of-the-art conventional lathe, belonging to the universal lathe product line. With this machine, KNUTH has created a precise and powerful tool that stands out due to its robust construction and long service life. Equipped with a high-performance motor and a wide range of useful accessories, this machine meets various production requirements. Its solid design and heavy, one-piece cast bed ensure maximum stability during machining, while the intuitively operated spindle head panel and the 3-axis position display provide easy handling and high accuracy. Additionally, the adjustable longitudinal stops enable automatic feed cut-off, greatly simplifying repeat operations. The Turnado 230/2000 is perfectly suited for long workpieces, thanks to its standard accessories, including both a travelling and a fixed steady rest. If you are ready to purchase this robust universal lathe, order now or request a quote. Lsdpfx Asp Ebgrebkohr

Sąlyga: naujas, Ex-display promotion. NEW. No. 1 available for immediate delivery. CE warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw designed for cutting solid bars and small-section profiles, offering high performance and excellent precision. Its robust construction provides the rigidity and accuracy required for the cutting unit. The blade drive features a dual-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Adequately sized flywheels and robust blade guides, equipped with sealed bearings and adjustable carbide plates, ensure reliable operation. Blade tensioning is managed via an electromechanical micro-switch by rotating the blade. The machine is fitted with safety devices on the flywheel covers and the blade, and includes a swiveling worktable for material support and a vice with rapid approach function. Operation: The cutting cycle is started with a start button, and the machine will: 1. Close the vice and start the blade motor; 2. Lower the saw bow to perform the cut; 3. Return the bow to the starting position; 4. Stop the blade motor; 5. Open the vice. Manual cutting mode available. Cutting speed (m/min): 38-77 Cutting thickness (mm): 1.2 Miter cutting range: From 45° left to 60° right Adjustable stop for repeat cuts Electropump for blade coolant: 0.06 kW Cutting capacity at 0° (Round / Square / Rectangle): 260 / 250x250 / 220x330 mm Cutting capacity at 45° left (Round / Square / Rectangle): 225 / 210x210 / 160x225 mm Cutting capacity at 45° right (Round / Square / Rectangle): 215 / 200x200 / 160x210 mm Cutting capacity at 60° right (Round / Square / Rectangle): 130 / 130x130 / 130x140 mm Lhodpog S Ui Ajfx Abkor Blade dimensions: 3010x27x0.9 mm Weight [kg]: 415

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 used surface grinding machine Make: Elb Model: Smart NG STC Serial No.: 511210608 CNC control: Siemens, type Simatic Multipanel Touch Magnetic chuck: 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load capacity (magnetic plate): 400 kg Grinding area (L x W x H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 4.3 kW Grinding spindle taper: 36 mm Maximum vertical travel: 475 mm Maximum cross travel: 370 mm Machine weight: 3,800 kg Machine dimensions (L x W x H): 2,750 x 2,050 x 2,150 mm Electronic handwheel for Y/Z axis Dressing unit with dressing compensation and diamond dresser, height-adjustable by 22 mm Wet grinding system with coolant pump, 50 l Automatic paper band filter, 60 l Travel measurement on Y/Z axis via rotary encoder Lhedpov T Rhasfx Abkor

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Lodpfx Aogf H Sasbkshr Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: labai geros būklės (naudotas), Low-temperature boiler, Buderus SB615, output 510 kW, 120°C, 5.5 bar, suitable for gas or oil burners. Lhodpfx Ajqww Icjbkjr

Sąlyga: naujas, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications - Distance between centers: 2000 mm - Center height: 330 mm - Swing over bed: 660 mm - Swing over gap: 900 mm - Swing over cross-slide: 460 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle mounting: DIN 55029, D1-8 - Speed range (16 steps): 25 – 1600 rpm - Longitudinal feed range (25 steps): 0.044 – 1.48 mm/rev - Cross feed range (25 steps): 0.022 – 0.740 mm/rev - Metric threads (54): 0.45 – 120 mm - Inch threads (54): 7/16 – 80 TPI - Quill diameter: 90 mm - Quill travel: 235 mm - Quill taper: MK 5 - Motor power: 7.5 kW (10.0 HP) - Machine dimensions (W x D x H): 3630 x 1200 x 1520 mm - Weight approx.: 2900 kg Features - Versatile applications in general engineering, production, single-part manufacturing, etc. - Central, user-friendly controls for feeds and threads with lead and feed screw - Prism bed made of grey cast iron, inductively hardened and precision ground - Modern main spindle bearing with precision angular contact roller bearing - Hardened and ground gears and shafts, including those in the feed gearbox - Rapid traverse for longitudinal and cross feed as standard, reducing non-productive time - Large spindle bore (105 mm) for workpieces with large diameters - Smooth start via mechanical multi-plate clutch - Electromechanical foot brake to reduce non-productive time - Optimal machining performance, even in face turning operations - The bed is reinforced with heavy ribs to stiffen the bed guideway and minimize vibration influence Scope of Delivery Lsdpfxofbbx Rs Abkohr - 3-axis digital readout ES-12 V with LCD display - Slip clutch - Rapid traverse for longitudinal and cross feed - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. workpiece diameter 180 mm - Travelling steady rest – max. workpiece diameter 120 mm - 2 live centers - Motor with magnetic brake (CE-compliant) - Foot pedal with braking function (CE-compliant) - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Change gears - Reducing sleeve - Chip guard (rear panel) - Cable management via energy chain - Operating tools