Gilių skylių gręžimo staklės

TBT ML 200-4-800

Sąlyga: paruoštas naudoti (naudotas), Wheel diameter – max. 150 mm Wheel width 1 – 200 mm Module – max. 4 Module – min. 1 Control Siemens Sinumerik 840 D Table diameter 140 mm Axial adjustment – max. 200 mm Cutter mount ISO 40 Max. cutter diameter 130 mm Max. cutter length 220 mm Infinitely variable cutter speeds 300 – 1200 rpm Max. cutter traverse 170 mm Swiveling cutter head + / – 45° Feed rate 1 – 1500 mm/min Rapid traverse speed 3000 m/min Max. workpiece diameter in magazine: 150 mm Total connected load 50 kW Machine weight approx. 8.5 t Space requirement approx. 4.7 x 3.6 x 2.6 m Used CNC gear hobbing machine make: Pfauter, year of manufacture 1992, completely overhauled in 2013 by SerWeMa, equipped with Siemens Sinumerik 840 D control and workpiece magazine. This is a pre-owned machine, therefore we sell under exclusion of any warranty. Njdjvzhg Nspfx Aghewp

Sąlyga: geras (naudotas), Gamybos metai: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Drilling method: Single-lip drill Njdevcbg Sopfx Aghewp Drilling depth: Quill spindle: 110 mm Seal housing: 430 mm Seal housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t We do not guarantee the correctness, completeness or up-to-dateness of the information provided.

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2014, Funkcionalumas: neveikiantis, HTC / Manentimacchine SRL leaf stripping machine incl. camera technology HTC16CF Not operational – conversion can be carried out for a surcharge of €4,000 per unit. Two machines available for sale. Nwedpfx Agetdrkmohsp

Sąlyga: geras (naudotas), Gamybos metai: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide travel: 850 mm Drilling method: single-lip drilling Drilling depth with: Submersible spindle: 120 mm Nwsdovca Rcjpfx Aghjp Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse speed (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max travel: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and timeliness of the information provided.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, CNC thread, gear, and profile rolling machine Model ROLLEX 1 Base Frame: The base frame of the thread and profile rolling machine is constructed from welded steel profiles, partially clad with sheet metal. The front section of the base houses the reservoir for process lubricant. Main Drive: The main drive generates the rotational motion required for gear rolling. The drive motor is flange-mounted to the spindle bearing base plate via the Cyclo Drive gearbox. The rotary motion is transferred to the rolling spindle via a Schmidt coupling. The machine operates within a speed range of 0 to 30 rpm, further subdivided into 0 to 20 rpm for continuous operation (S1), and 20 to 30 rpm for intermittent operation (S4). The speed is steplessly adjustable via a frequency inverter. Brand: PROFIROLL Nedjv Uxq Sspfx Aghswp Type: ROLLEX 1 Year of manufacture: 2003 Control system: Siemens Sinumerik 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: - Max. rollable workpiece diameter: 40 mm - Rolling slide stroke: 2 x 80 mm - Min. / max. center distance of rolling spindles: 160 / 320 mm - Rolling spindle height above machine bed: 160 mm - Max. tool diameter: 250 mm - Tool holder diameter of rolling spindles: 120 mm - Tool holder length of rolling spindles: 80 mm Force & Drive - Max. rolling force: 100 kN - Rolling spindle speed, stepless: 0-30 rpm Motors - Rolling spindle drive: 2 x 13 Nm - Hydraulics, 50 Hz: 5.5 kW - Process lubrication, 50 Hz: 0.1 kW - Central lubrication, 50 Hz: 0.06 kW Temperature range: +5 to +40°C Power supply/frequency: 3-phase, 50 Hz Rated voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24V / 230 V Connected load: 18 kW Rated current (machine): 39 A

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Equipment: Njdovyacyjpfx Aghswp 1 right-hand feed slide 1 eccentric press 300 kN 4 standard slide units 1 narrow slide unit Working area: Wire diameter range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 520 mm Performance: 10 – 250 cycles/min.

Sąlyga: naudotas, Gamybos metai: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/rev Nwsdpfx Aget Hwzcehop Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. [dimension missing] m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Automatic Workpiece Loading System Type MZ 600, Year of Manufacture approx. 1991, #3591 _____ Max. workpiece Ø: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Worm leads: 1 Axis distance tool-workpiece min./max.: 0–70 mm Whirling head swiveling: ±12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/rev Whirling head drive: approx. 1.5 kW Total drive: approx. 4.5 kW – 220 V/380 V / 50Hz Weight: approx. 1,700 kg Accessories / Special equipment: The machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a Rübenach vibrating bowl with pneumatic swivel gripper for introducing blanks, as well as a counterpoint (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electronic program control with display for motion sequence monitoring. Fault indication, piece counter, oil mist extraction, coolant system, etc.

Sąlyga: naudotas, Gamybos metai: 1986, Ratų skersmuo - maks. . mm Ratų plotis . mm Modulis - maks. . Nedpfxoucgw Ds Aghewp Mašinos svoris apie 7 t Duomenys pateikiami vėliau

Gamybos metai: 2013, Sąlyga: naudotas, Technical details: Njdpfeixl Ahjx Aghswp Swing diameter: 80 mm Workpiece length: 450 mm Approx. machine weight: 3,500 kg

Sąlyga: naudotas, Gamybos metai: 1986, Ratų skersmuo - maks. 150 mm Modulis - maks. 5 Nwodpoucgw Refx Aghsp Modulis - min. 0,5 Mašinos svoris apie 10 000 kg Reikalinga vieta apie 6500 × 2700 × 3600 mm