Konteinerių tvarkymo tiltiniu kranu

TAKRAF/TEICHMANN

Gamybos metai: 1987, būklė: naudotas, Newly rebuilt single-girder full gantry slewing crane Configured for four-rope grab operation as well as hook operation Lifting capacity in grab operation: approx. 8.0 t at an outreach of approx. 12.0 to 25.0 m Lifting capacity in hook operation: max. approx. 12.5 t Lifting height above rail level with jib: approx. 25.0 m, max. approx. 22.9 m Full gantry track gauge previously/currently shortened: approx. 6.0/5.2 m Manufacturer/rebuild: TAKRAF/TEICHMANN Year of manufacture/rebuild: 1987/2005 Total weight: only approx. 90.0 t Fedpfjdlazgjx Ahwjpd Crane equipped with a drive-under full gantry, intermediate column to raise the jib articulation point, complete enclosure of the upper crane, rebuilt with completely new electrics (frequency inverter control), cab, operator seat, motor cable reel, as well as new conservation in 2005 Operating speeds: Hoist current/optimized: approx. 52.0/65.0 m/min Jib adjustment: approx. 35.0 s Slew gear: approx. 1.2/2.4 rpm Crane travel speed max.: approx. 50.0 m/min

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 2 h, bendras ilgis: 12 200 mm, bendras aukštis: 2 890 mm, bendras plotis: 2 440 mm, galia: 1,65 kW (2,24 AG), kuras: dyzelinas, Įranga: Tipinė plokštelė prieinama, These are three emergency power generators, each with 2,000 kVA / 1,600 kW continuous output at cos phi 0.8. Voltage: 10 kV, frequency: 50 Hz. An inspection is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamford Design: 40" soundproof container with a noise level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg Data sheet attached (DE and EN). Fpodpfx Asqqhuyjhwsd Each container is also fitted with a 2,000 L tank for initial diesel supply. The gensets are regularly load-tested.

Gamybos metai: 1991, būklė: visiškai atnaujintas (naudotas), Current track gauge approx. 42.5 m Outreach (fixed support usable/total) approx. 10.0/16.5 m Fpjdomdrxaepfx Ahwod Lifting height approx. 8.0 m - Two Demag monorail trolleys, can be operated separately or together - Radio remote control as well as emergency control

Gamybos metai: 2009, būklė: geras (naudotas), Lifting capacity: 30 t Fjdpoqiz N Rofx Ahwopd Precision lift Lifting height: 9 meters

Būklė: naudotas, Gamybos metai: 1988, veikimo valandos: 1 h, mašinos/transporto priemonės numeris: V 516, bendras plotis: 2 000 mm, bendras ilgis: 7 000 mm, bendras aukštis: 1 800 mm, darbinis slėgis: 300 juosta, spaudimo jėga: 90 t, aliuminio lakšto storis (maks.): 5 mm, galia: 11 kW (14,96 AG), tuščias svoris: 16 000 kg, pjovimo jėga: 90 t, paskutinio kapitalinio remonto metai: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Footprint: 7 x 2 x 2.5 m Fpedpfx Aolhqd Rjhwsd Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30/01/2026

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, 2 x 125 tonų portali krautuvai, kėlimo aukštis 30 metrų, pagaminimo metai 2013. Fpedjgmdnfopfx Ahwod

Gamybos metai: 2002, būklė: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min Fjdjhzbipspfx Ahwepd - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 2026, būklė: naujas, CM 10. Kapacitet: 750 kg/sat. Naznačena kapacitet za sito od 4 mm. Lokacija: Konya, Turska, Büsan industrijska zona. Motor drobilice: 37,5 kW. Ukupna težina: 2,5 tone. Fjdpfx Aou Dxngehwspd Magnetna traka za pražnjenje, plastična spirala, prašni ciklon. Zauzima otprilike 20 m² prostora.

Būklė: naudotas, Gamybos metai: 1994, Technical Details: Fodel Su Rxspfx Ahwspd Number of spindles: 8 Spindle bore: 32 mm Item: cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal through-bore D=32mm Control: Siemens SIMATIC S7 electronic cam switchgear Balluff Gripper at station 8 for rear-side machining CNC cross-slide at position 6 CNC cross-slide at position 7 Workpiece conveyor belt Coolant system Schimpke Chip conveyor with magnetic separator Thread-cutting clutches Displayed tool equipment may differ from delivery scope! Please contact us for further information and images via mail(at) or *

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, 630 kVA transformatorių stotis, pagaminta 2005 m., Bockenem UK1700-30, 630 kVA alyvinis transformatorius, 20 kV±2x2,5 %/400 V, AREVA, DCU3834 su AK tipo aukštos įtampos izoliatoriais, US-Pfisterer jungtys. Fpsdpfexzq Dtsx Ahwed