Vidaus ir išorės šlifavimo staklės

Tacchella Elektra Evo 1018 MPC

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, centro aukštis: 180 mm, šlifavimo ilgis: 1 000 mm, šlifavimo disko skersmuo: 508 mm, šlifavimo skersmuo: 350 mm, !!!DĖMESIO – VIETINIS PARDAVIMAS ADRESU 74219 MÖCKMÜHL!!! Išorinė apvalioji šlifavimo staklė TACCELLA ELEKTRA Evo 1018 MPC Metai: 2008 Valdymas: Fanuc 21i Didž. šlifavimo skersmuo: 350 mm Didž. šlifavimo ilgis: 1 000 mm Įranga: - 2 šlifavimo velenai tiesiam ir kampuotam pjovimui viena ašimi - Šlifavimo veleno galvutė reguliuojama rankiniu būdu - Paruošta vidiniam šlifavimui - Pinolis - Automatinė balansavimo sistema - Jutiklių sistema ruošinio ilgiui ir skersmeniui matuoti - Konstrukcijos vibracijų jutiklis - Aušinimo ir tepimo sistema (KSS) - Alyvos garų ištraukimo sistema Kljdpfx Aoy N S Hnjlzst Daug šlifavimo diskų ir priedų komplekte

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Kljdpfxjynmpgj Alzet Grinding head swivelling: 180° ± Grinding spindle speeds: 1,500 / 1,700 / 2,200 rpm Infeed incrementally: 0.001–0.030 mm/Ø Infeed continuously: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1,300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 × 2.0 m Originally supplied new to university. Taken over in 2018. Then fully serviced at BEMA and delivered to a single-operator workshop. The machine will now be serviced again and the table geometry remachined. 2-axis Fagor digital readout retrofitted. – Tailstock with fine adjustment – Internal grinding device – Coolant system Additional accessories available on request.

Būklė: geras (naudotas), Gamybos metai: 2005, Horizontal machining centre Machine type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of manufacture: 2005 TECHNICAL DATA: Ksdpfx Alsv Nhyljzslt Travels: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse (X/Y/Z): 50 m/min Speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool positions: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Equipment features: Internal coolant supply (IKZ): bar Chip conveyor High-pressure pumps

Būklė: geras (naudotas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Distance Between Centres: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Klsdpfxevca Izs Alzot Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Minimum Automatic Travel: 1.5 mm Max. Travel: 400 / 700 / 1020 mm Max. Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Feed Travel with Handwheel: 20 mm Maximum Plunge Depth: 1.7 mm Grinding Spindle Headstock Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Rotational Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Headstock Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Taper Mount: Morse 5 Collets: W25 Tailstock Taper Mount: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No liability is accepted for the correctness, completeness or accuracy of the information provided.

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Sukimosi skersmuo virš lovos: 600 mm Sukimosi skersmuo virš atramos: 400 mm Kedpfew Rkt Isx Alzelt Sukimosi ilgis: 2000 mm Centro aukštis virš atramos: 300 mm Centro atstumas: 1600 mm Sukimosi greičiai: 3 - 2.500 aps./min Grąžto laikiklio kūgis: MK 5 Pagrindinio veleno anga: 62 mm Pinolio eiga: 190 mm Išilginiai padavimai: apie 0,001–10 reguliuojamas mm/aps. Skersiniai padavimai: apie 0,001–5 reguliuojamas mm/aps. Greitasis padavimas X ašyje: iki 5000 m/min. Bendras galios poreikis: 40 KVA Mašinos svoris apie: 5,6 t Mašinos matmenys (IxPxA): apie 4,0 x 2,0 x 1,9 m Įskaitant priedus, žr. nuotrauką *

Būklė: geras (naudotas), Gamybos metai: 2014, centro aukštis: 180 mm, plotis centre: 600 mm, šlifavimo skersmuo: 260 mm,

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 100 000 h, slėgis (min.): 10 juosta, slėgis (maks.): 10 juosta, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally pre-piped and pre-wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20°C Relative humidity 0% Usable flow rate at the outlet of the compact unit at operating overpressure of 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Klodpfx Alou Rptyszjt Motor rated power: 18 kW Motor rated speed: 4867 rpm Shaft power requirement at maximum operating pressure: 24 kW Shaft power requirement in idle mode: 5.6 kW Compressed air temperature after dryer: 23°C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Būklė: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total connected load: 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical Honing Machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial no.: 50 / 1790 _____ Max. honing diameter: 10 - 90 mm Max. honing depth: 30 - 450 mm Max. spindle stroke: 490 mm Spindle throat: 400 mm Mounting height under spindle nose top approx.: 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Spindle speeds, infinitely variable: 160 – 830 rpm Stroke speed, infinitely variable: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW - 400 V - 50 Hz Weight approx.: 3,500 kg Overall machine height approx.: 4,000 / 3,300 mm Accessories / Special equipment: • Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc. • With a fixed table 600 x 400 mm • Automatic shut-off after a preset time, followed by spindle return • Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D • Separate hydraulic unit, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Ksdst Hw T Sopfx Alzelt Condition: good to very good - ready for demonstration Delivery: ex stock - as inspected here Payment: strictly net - upon receipt of invoice

Būklė: naujas, Gamybos metai: 2022, X ašies padavimo greitis: 20 m/min, Y ašies padavimo greitis: 20 m/min, padavimo greitis Z ašis: 15 m/min, bendras svoris: 7 400 kg, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 aps./min, Y ašies eiga: 1 500 mm, galia: 22 kW (29,91 AG), DYAS Plattenbohrzentrum - DYAS PDC-1500 Anzahl Bohraggregate: 1 vertikal Motorleistung: 22 kW Spindeldrehmoment: 280 Nm Spindeldrehzahl: 10–4.000 U/min Kljdpfxsgbfaxj Alzjt Automatischer Werkzeugwechsler (ATC): 16 Plätze Maximales Werkstückgewicht: 760 kg Maximale Bohrleistung: Ø40 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Klsdpfxjd Nw Tto Alzjt Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power: 15 HP