Apdirbimo centras

SW Schwäbische Werkzeugmaschinen BAW06-22

Sąlyga: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 22 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2080594, X ašies eiga: 600 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, veleno veikimo valandos: 9 500 h, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Lhjdpfx Adoxt D Ezs Esp Power factor: 0.6 Fusing: 200 A gG (5 s) Weight Operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Position measurement system X/Y/Z: Direct, absolute X axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle configuration: Horizontal, twin spindles side by side Motor spindles, liquid cooled, synchronous drive Spindle diameter: 40 mm Tool holder: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: - X axis: 600 mm - Y axis: 600 mm (optional 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mounting with two separate rotary tables for mounting clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s Note The system is delivered without any product-specific tools, fixtures, or robot grippers.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate (X, Z, Y): - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main) - Rapid Traverse Max. (X, Z): - Main Spindle: 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque (Nm): Lsdpfx Ajwdrfgod Eehp - Main Spindle Bore: - Main Spindle Nose: A2-6 - Sub Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque (Nm): - Sub Spindle Bore: - Sub Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip Conveyor - Three-color Status Lamp - Fixed Tool Holders - Parts Catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Gamybos metai: 2013, Sąlyga: labai geros būklės (naudotas),

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 48 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2080233, X ašies eiga: 600 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Power system: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Lhodpjxt D Ebsfx Ad Ejp Spindle arrangement: Horizontal, twin spindle side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool holder: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Working Area Spindle distance: 600 mm Travel: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carrier (Q-axis) with two directly driven NC rotary tables (A-/U-axes) Double-sided gearing on swivel carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5″ Tangential torque: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08.2000 in Germany. This machining center operates along three axes, with maximum X / Y / Z travel of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN cable connection to an external computer. Additionally, the machining center is outfitted with a chip conveyor, hydraulic clamping, a 87-tool magazine, a swiveling probe, and a control cabinet air conditioning unit. The spindle operates at a maximum speed of 15,000 rpm. Spindle hours: approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of the Hermle C 800 V CNC Machining Center – X / Y / Z axis travel: 800 / 600 / 500 mm Ljdeiva Dkopfx Ad Eohp – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7000 kg Equipment of the Hermle C800V CNC Machining Center – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Coolant supply through the tool: 40 bar – Control cabinet air conditioning – Swiveling probe – Chip conveyor Additionally available for separate purchase, also visible in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 touch probe (as new)

Gamybos metai: 2001, Sąlyga: paruoštas naudoti (naudotas), Horizontal Machining Center Giddings & Lewis HMC 410 Pallet size: 1,250 x 1,600 mm Maximum pallet load: 7,000 kg Pallet change time: 55 sec. Number of pallets: 2 pcs Table indexing: B-axis 0.001° Table traverse (X): 3,000 mm Spindle vertical travel (Y): 2,100 mm Column longitudinal travel (Z): 1,800 mm Feed rate (X/Y/Z): 1 – 40,000 mm/min Rapid traverse (X/Y/Z): 40 m/min Rotary table speed: 6 rpm Max. swing diameter: Ø2,500 mm Spindle taper: ISO 50 Spindle motor power: 30 kW Spindle speed: 20 – 5,000 rpm Automatic tool changer: 120 stations CNC controller: Siemens Sinumerik 840D Max. workpiece height: 2,000 mm Accessories Hexagon radio tool measuring probe Loading stations: 2 pcs Lhedpoguk Icjfx Ad Esp Year of manufacture: 2001 (See also further offers by this advertiser.)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 9 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 000 mm, FREZAVIMO / GRĘŽIMO STAKLĖS SU JUDANČIA KOLONA CME TECHNINĖS CHARAKTERISTIKOS CME – GALIMA APŽIŪRĖTI VEIKIANČIĄ Gamintojas: CME Modelis: MB 9000 Metai: 2007 CNC: Siemens Sinumerik 840D X ašis: 9000 mm Y ašis (vertikali): 4000 mm Ljdpfx Aeu R Rk Hjd Ejhp Z ašis: 1000 mm W ašis (Ø 150 mm): 700 mm 2 rotaciniai-slankiojantys stalai (linijinis judesys: 2000 mm) 2500 x 2500, talpa 25 t Heidenhain optinės liniuotės visose ašyse Tiesioginė galvutė Įrankių keitiklis 90 pozicijų ZF rėžio keitimas Vidinis aušinimas Drožlių ištraukėjai

Sąlyga: naujas, The new vacuum pump is available from stock and ready for immediate use. We recommend that installation is carried out only by trained personnel. Adaptation materials available upon request. Oil fill: without Lsdpsttzxrsfx Ad Eehp Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return into non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Interim sale reserved! This offer is valid only for customers within Germany and other European countries!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 6 050 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 213 mm, Y ašies eiga: 572 mm, Tekinimo centras Haas Tipas: ST 25 Metai: 2017 Darbo valandos: 6047 h Lsdjrdg H Hepfx Ad Ejhp Didžiausia vardinė galia, pavaros sistema: 22,4 kW, diržinė pavara Strypo talpa, didž. greitis: 76,0 mm, 3400 aps./min Ašių eigos diapazonas (X, Z): 213 mm, 572 mm Drožlių konvejeris Veleno perėjimas: 75 mm

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 200 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 700 mm, - Milling head/spindle overhauled in 2022 for €28,000 - Heidenhain iTNC530 CNC control - NC swiveling milling head: B-axis: full NC axis A-axis: horizontal/vertical - NC rotary table (C-axis) - 72-position automatic tool changer - Chip conveyor - Electronic handwheel Lhedpfx Adjrz I Hbj Esp - Coolant system (internal coolant supply 20 bar) Technical details: X-axis travel (longitudinal): 1200 mm Y-axis travel (cross): 600 mm Z-axis travel (vertical): 700 mm C-axis rotary table: 360° B-axis: +/-90° Rotary table size: 800 mm Spindle taper: SK40 Spindle speed range: 0–6300 rpm Number of tool positions in ATC: 72 Spindle drive motor (100% / 40% duty cycle): 17 / 25 kW Approx. machine weight: 9000 kg Technical data, accessories, and machine description are non-binding.