Cilindrinio šlifavimo staklės

Studer S20

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 100 mm, šlifavimo ilgis: 650 mm, Vidaus ir išorės apvalaus šlifavimo staklės Studer S20-2 Atstumas tarp centrų: 650 mm – Centras aukštis: 100 mm Priedai pagal užklausą! Paruošta pristatymui! Nsdpjqv Eg Rsfx Af Iscl

Sąlyga: naudotas, Gamybos metai: 2015, x eiga: 1.200 mm y eiga: 600 mm z eiga: 675 mm Valdymas: C 620 HSCI FS Stalo dydis: 1.220 x 620 mm Įrankių keitiklis: 40 pozicijų Atstumas tarp stalo ir veleno: 735 mm Sūkių dažnis: 10.000 aps/min Veleno variklis: 18 kW Vidinis aušinimas, slėgis: 30 bar Ncedpfx Aox Ak Hdof Iol -Elektroninis rankenėlė. -Linijiniai matavimo liniuotės. -Lazeriniai matavimo zondai. -Ruošinio matavimo zondo paruošimas. ZONDAS NEĮEINA.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Nedow T Sc Nopfx Af Iocl Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus,

Gamybos metai: 2024, Sąlyga: naudotas, Grinding wheel arbor: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: infinitely variable, 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel speed: 200 - 2000 rpm Oscillation stroke of the dressing wheel: 0-70 mm Dressing wheel motor connection rating: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Equipment: - Full enclosure - Reinforced grinding wheel motor, 4 kW - Reinforced dressing wheel motor, 2.2 kW - 2 machine lights, 12 V - Glass scale on X and Z linear axes - 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) Ncodpfx Afslfil Sj Iel - High-precision angle measurement device (0.05°) - Diamond/CBN wheel spindle, infinitely variable, 100 - 1000 rpm - Dressing wheel speed infinitely variable, 200 - 2000 rpm - Infinitely variable oscillation stroke speed - Automatic central lubrication - SIC manual dressing wheel.

Sąlyga: naudotas, Gamybos metai: 1987, Šlifavimo skersmuo: 200 mm Šlifavimo ilgis: 400 mm Smailių aukštis: 100 mm Geometriškai atnaujinta ir naujai perdažyta Su vidinio šlifavimo įranga Ncedpfovw Duuox Af Isl Priedai pagal užklausą Mašiną galima apžiūrėti pas klientą prijungtą prie elektros nuo 2025 m. iki 2026 m. sausio pabaigos.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 500 kg, Mašina gali būti išbandyta įjungus elektrą. Nodpfjw Idwzjx Af Iocl

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Nodpfx Aourw Uyof Iecl Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: naudotas, Apvalaus šlifavimo staklės STUDER S20-2 Njdpfx Afjxrg Hxo Iscl

Sąlyga: naudotas, TECHNICAL DATA - Centre height: 100 mm - Centre distance: 650 mm - Internal grinding length: 100 mm - Internal grinding diameter: 3 to 40 mm - Max. table swivel: 30° - Workpiece holder headstock * Spindle speed (variator): 60–1200 rpm * Motor power: 0.5 kW * Internal taper: Morse 4/2 - Grinding wheel dimensions: 350 x 30 x 127 mm - Grinding wheel headstock * Power: 3 kW * Swivel range: 15/30° - Max. workpiece weight: 20 kg - Total power consumption: 5 kW WEIGHT AND DIMENSIONS Ncjdpfsuhby Rsx Af Iol - Required floor space: 3000 x 1400 mm - Machine height: 1600 mm - Machine weight: 1900 kg EQUIPMENT - Complete internal grinding attachment: 45,000 rpm - 1 complete cooling unit - 1 tailstock with fine adjustment - 1 reversible and adjustable dressing device - 1 swivelling diamond holder - Digital display, 2 axes X and Y - 3-point steady rest

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 3018-04, Country of Manufacture: Switzerland Voltage: 380/50/3 Net Weight: 3100 kg Overall Dimensions: 230x155x170 cm Installed Power: 13 kVA Customs Code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre Distance: 650 mm Grinding Capacity SpW+bs -80 Stroke: 700 LONGITUDINAL SLIDE Max. Travel: SpW+50 mm Minimum Automatic Feed: 1.5 mm Speed: 50-5,500 mm/min Reversal Dwell Time: 0-6 sec. Maximum Table Swivel: 12°/10°/8.5°/6° Pneumatic Table and Workhead Relief CROSS SLIDE Max. Travel: 300 mm Rapid Traverse: 60 mm Plunge Depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per Pulse: 0.001-0.05 mm WHEELHEAD Left Wheel, Outer Grinding: 400x80x127 mm Drive Power: 5.5 kW Peripheral Speed: 35 m/s Rotational Speed: 1670/2110 rpm Internal Grinding Device for Belt-driven Spindles, incl. drive unit: 1.5 kW Ncedsw T Sd Tjpfx Af Iel WORKHEAD Swivel Range: 0-90° Continuously Variable Speed: 30-1000 rpm Internal Taper: Morse 5 Clamping Collets: W-25 Drive Power: 0.55 kW Max. Workpiece Weight (between centers): 130 kg Load for Non-Supported Grinding: 100 Nm TAILSTOCK Internal Taper: Morse 3 Quill Stroke: 35 mm Fine Adjustment for Cylindricity Correction: ± 40 µm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Generatrix Straightness over 630 mm: 0.003 mm Roundness in Unsupported Grinding: 0.0003 mm CONNECTION VALUES Max. Power Consumption: 13 kVA Permissible Voltage Fluctuation: -15% +10% Permissible Frequency Variation: ± 3% Required Compressed Air Pressure: 5 bar Except for error or omission, the above technical data are provided without obligation.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, TECHNISCHE DATEN: - Spitzenhöhe: 100 mm - Spitzenweite: 400 mm - Innen-Schleiflänge: 100 mm - Innen-Schleifdurchmesser: 3 bis 40 mm - Maximale Tischschwenkung: 30° - Werkstückspindel: Spindeldrehzahl (stufenlos): 60–1200 U/min Motorleistung: 0,5 kW Innenkegel: Morse 4/2 - Außen-Schleifscheibenabmessungen: 350 x 30 x 127 mm - Schleifspindelstock: Leistung: 3 kW Schwenkbereich: 15/30° - Max. Werkstückgewicht: 20 kg - Max. Anschlusswert: 5 kW - Maschinengewicht: 1.900 kg Zubehör/Optionen: Ncodpfx Aswc En Sof Iel - Komplette Innenschleifeinrichtung: 45.000 U/min - Novomatic-Messsystem - Radienabrichter - CBN- und weitere Schleifscheiben - Schleifflansche - Abrichtvorrichtung - Spannfutter für Schleifspindelstock - feste Lünette - Spannzangen - Innen-Schleifzubehör - Ersatzteile - Kühlmitteltank - Dokumentation - usw. Sehr geringe Betriebsstunden! Maschine aktuell unter Strom in unserem Lager!

Sąlyga: visiškai atnaujintas (naudotas), Details see PDF Ncodpfxsd H Nrqj Af Iel Options: - Internal grinding attachment - Grinding up to 3 diameters in one operation cycle - Other options available upon customer request Accessories: on request

Gamybos metai: 2020, Sąlyga: naujas, Available ex stock Band dimensions: 4420 x 34 x 1.1 mm Nsdpjiryf Sjfx Af Iecl Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm Bundle cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Main drive motor power: 3.75 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 755 mm Weight: 1680 kg Dimensions (W x D x H): 2400 x 2120 x 1840 mm

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, Atstumas tarp centrų: 650 mm Vidinis / išorinis diametras 2 ašių SONY skaitmeninis atvaizdavimas Ncodjwu Tdfjpfx Af Iol Aušinimo skysčio bakas