IŠORINIO ŠLIFAVIMO STAKLĖS

STUDER S 31 CNC

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Centre height: 175 mm, grinding length: 650 mm, B-axis: -15°/195°, workpiece speed: 1750 rpm, grinding wheels T1/T2: 500 mm/400 mm, bore: 203 mm, max. workpiece weight: 80 kg, workpiece headstock: MT4, tailstock: MT3. Machine dimensions X/Y/Z: approx. 3000 mm/3000 mm/2100 mm, weight: approx. 4000 kg, operating hours: 56,300 h, control: GE Fanuc Series 16i-T. Documentation available. An on-site inspection is possible. Expected to be available from February/March 2025. Hnjdpfx Afsuku Syj Isg

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Hnsdpovivx Nofx Af Iog Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, Gamybos metai: 2004, Pressure: 80 t Hedpfx Ajvuua Nsf Ieng Stroke: 16 - 63 mm Stroke rate: 100 - 750 strokes/min Column gap: 970 mm Installation height (stroke + ram adjustment at top): 380 mm Lateral column opening: 380 mm Table dimensions: 940 x 910 mm Pass-through opening in the table: 770 x 190 mm Table height above floor: 1180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standards With infinitely variable three-phase drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil circulation lubrication Mechanical roller feed Bruderer BBV 205/120, driven via press main shaft/universal shaft Guethle CK cantilever brackets Optionally, a soundproof enclosure can be offered – price on request.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hnsdpfxevnd Sue Af Iog

Sąlyga: geras (naudotas), Manufacturer: ESTARTA Model: 301 MV Condition: Used Stock Number: 4576 Location: Badajoz, Spain Dimensions: 1520 x 1020 x 1260 mm Weight: 1,550 kg Grinding wheel opening: 1.5 / 50 mm Max. grinding wheel width (for plunge grinding): 125 mm Work grinding wheel dimensions (OD x ID x width): 300 x 125 x 175 mm Min. external diameter of work grinding wheel: 220 mm Max. profile depth of work grinding wheel: 8 mm Regulating wheel dimensions (OD x ID x width): 220 x 125 x 125 mm Min. external diameter of regulating wheel: 165 mm Max. profile depth of regulating wheel: 8 mm Work grinding wheel motor power: 7.5 kW Regulating wheel motor power: 0.75 kW Work grinding wheel head tilt angle: +/- 5º Hnedpfx Aer Ezfpof Iog

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Hodpfolbmupjx Af Isng

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: Hjdpfoiw Dlksx Af Ijng - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 713406, -KOM 105- Offered here is a high-performance industrial grinding machine from Kehren & Co, equipped with a paper band filtration system from FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine is fitted with 2 grinding tables/magnetic chucks for pendulum processing. Technical specifications: Segment Grinding Machine: Manufacturer: Kehren & Co Hodpfx Aog Nt A Ejf Ieng Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: segment grinding Control: Marposs Weight: 6,600 kg Paper Band Filtration System: Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Year of manufacture: 1992

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, virvės ilgis: 30 000 mm, virvės greitis: 47 000 mm/min, mašinos/transporto priemonės numeris: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard equipment, horticulture, and many other applications. The hydraulic attachment winch makes numerous tasks easier: - Pull firewood to the log splitter and set it up - Load logs onto trailers - Extract roots and trees - Attach as an auxiliary winch to forestry cranes and small excavators - Use as a winch for small tractors and narrow-track tractors Rugged steel construction with three-sided mounting capability (left, right, rear) featuring 12 threaded holes, providing extensive options for securing the winch (threads are pre-cut and painted; re-tapping is required prior to use to remove rust protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), allowing you to select the desired speed and pulling power. Maximum operating pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Hnsdpodf Ufpjfx Af Ieg Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min with 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolting or welding installation. This version includes an electric hydraulic valve, radio remote control, and hydraulic hoses to the motor. Article number: HAW1700-EV-Funk

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Hedpfsuxfucjx Af Ieng Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...