Mašinos pavadėlis

Stahl Spannweite 270 mm

Sąlyga: naudotas, Gamybos metai: 2017, As new condition Rodovvxvdopfx Ah Hjbt Comprising: 1 piece measuring case 12-20mm Comprising: 1 piece measuring case 20-50mm Comprising: 1 piece measuring case 50-100mm

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: Rodpovrcqdsfx Ah Hebt – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t Rbsdpef Sqckjfx Ah Het 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: naujas, Variable speed, ISO 40. Power-driven cross table on all axes. 3-axis digital readout included. Base with chip tray. Cooling system. LED lamp. Mechanical speed indicator. Variable speed, power-driven axes with rapid traverse. Guideway lubrication system with manual pump. Milling capacity with insert cutter: 100 mm. Milling capacity: 35 mm. Drilling capacity in cast iron (pre-drill): 60 mm. Maximum drilling capacity in steel (S235JR, pre-drilled): 24 mm. Spindle taper: ISO40 DIN2080. Quill diameter: 86 mm. Spindle travel: 120 mm. Head tilt: +/- 45°. Vertical head rotation: +/- 90°. Head body rotation: +/- 180°. Vertical spindle speeds: (2) 60 – 500 | 500 – 3600 rpm. Motor: 400 V, 50 Hz, 2.25 kW. Distance between spindle nose and table: 45 – 395 mm. Distance between spindle axis and column: 215 – 450 mm. Table size: 1246 x 230 mm. Longitudinal table travel: 850 mm. Rjdpfx Ahoh Im H So Hsbt Cross table travel: 310 mm. Max load capacity: 400 kg. Dimensions: 1680 x 1500 x 2100 h mm. Net weight: 1,000 kg.

Sąlyga: geras (naudotas), Gamybos metai: 1956, Heavy-duty lathe, lathe, engine lathe, lead screw and feed shaft lathe - Manufacturer: Weisser, Lead Screw and Feed Shaft Lathe Type PF200 - Turning length: 1340 mm - Swing diameter over bed: 420 mm - Swing diameter over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock quill taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm Rbodpfxotzf N Rj Ah Hot - Weight: 1450 kg

Sąlyga: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Rbedpoq Ukbpjfx Ah Hjt Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Gamybos metai: 1960, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Rbodpocblc Sjfx Ah Het Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Sąlyga: naujas, Bernardo Manual Metal Circular Saw CS 315 H Technical Specifications Saw blade diameter: 315 x 40 mm Speed: 19 / 38 rpm Maximum vice opening: 150 mm Working height: 920 mm Motor output S1 100%: 0.75 / 1.5 kW Motor input S6 40%: 1.0 / 2.1 kW Voltage: 400 V Machine dimensions (W x D x H): 530 x 1000 x 1740 mm Weight approx.: 235 kg Solid material, round 90°: 80 mm 45°: 70 mm Tube, round 90°: 80 mm 45°: 70 mm Square tube 90°: 80 x 80 mm 45°: 70 x 70 mm Solid material, square 90°: 80 x 80 mm 45°: 70 x 70 mm Rectangular tube 90°: 90 x 80 mm 45°: 80 x 70 mm Solid material, rectangular 90°: 90 x 80 mm 45°: 80 x 70 mm Rsdpfx Ahod Id Uge Hsbt Features Gear head swivels 90° to the right and left for slotting operations Removable coolant tank integrated into the robust machine base Gear unit with hardened and ground worm shaft and bronze worm wheel Safety guard automatically opens during cutting Precision 4-way guided, self-centering double vice Ergonomically shaped handle with push button for fatigue-free cutting Low saw blade speed (19 / 38 rpm) is ideal for cutting solid materials Low-noise gear transmission running in an oil bath Scope of delivery Coolant system with filter Self-centering vice Machine base

Sąlyga: naujas, Tipo V-380 Anzahl der Räder (Stk): 3 Raddurchmesser: 120 mm Radbreite: 60 mm Vorschubgeschwindigkeit: 3,5 / 5 / 7 / 10 / 12,5 / 16 / 25 / 32 m/min Rodedg Ucuspfx Ah Hsbt Motorleistung: 750 W / 550 W Maschinenrahmen: Aluminiumguss Vorschubrichtung: Vorwärts/Rückwärts

Sąlyga: geras (naudotas), Tailstock Quill size: MT 2 Quill stroke: 30 mm Height adjustable Centre height: 250 - 285 mm Rsdpjdlp Txefx Ah Hsbt Tiltable from -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg