Stacionarus maišymo įrenginys

Sonstige/Other Frumecar EBA 1700 70 m³/h.

Sąlyga: geras (naudotas), Essentially comprising: Feed hopper (15 cbm) with push cart Kjdpfx Ajt Uzv Hja Rjdw Double-deck screening unit with feed chutes and undersize discharge conveyor Various transport and stockpile conveyors Overband magnet Electrical installation with control cabinet

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Initial commissioning: 2013 Control system: Heidenhain iTNC 530 incl. HR 520 handwheel Machine Hours Power-on hours: approx. 40,700 h Spindle hours: approx. 17,100 h Current milling spindle hours: approx. 150 h Travel X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-Axis Milling Head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear Axis Drives Feedrate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² The machine is currently set to the following basic parameters due to insufficient available power supply on site! Feedrate X/Y-axis: up to 40 m/min Feedrate Z-axis: up to 30 m/min Kdodpfx Aaowa T Hkj Rew Axis acceleration X/Y/Z-axis: up to 2.5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A The machine can be reset to its original values at any time provided adequate power supply is available. Reduced connection values: Connected load: 130 kVA Main fuse: approx. 250 A Dimensions, Weight Space requirement incl. peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Guarding, gantry, control cabinet: RAL 7035 light grey Milling head and attachments: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system by LTA Optionally at extra cost: - Renishaw RMP60 radio touch probe - BLUM Control NT Machine condition Fully operational, in very good condition. Already dismantled and stored.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1991, Batch mixing, approx. 100 t/h TELTOMAT mixed material silo with bucket elevator Kedpfx Aetph A Nea Redw 4 main compartments + additional compartment (total capacity: 160 t) Screening and drying drum Twin-shaft compulsory mixer 30,000 L heating oil tanks AMECO filter system 3 bitumen tanks 2 silos with screw conveyors 4-compartment dosing system

Sąlyga: naujas, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Kdodpegvkmrjfx Aa Row Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Maximum pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a versatile hydraulic press, specifically designed for bending, profiling and straightening applications. The machine’s possible uses depend on the accessories mounted on the work table, the tool holder, and in the bores and pin holes. • The HB-28 model is equipped for light bending operations on the work table with an angle scale, and the press can also be supplied with tools (such as block punches) for mounting on the tool holder, as well as tools for installation in the bores and pin holes to perform a variety of tasks. • The hydraulic system can be adjusted via pressure and flow control valves, which regulate the pressing force and speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke and to select between manual or automatic operation. The HB-28 model is also equipped with integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Sąlyga: naujas, Gamybos metai: 2025, Compact Concrete Batching Plant PROMAX C60-SNG L (60m³/h) Kdjdpfx Aaeflz Hfe Rsw Type: Compact concrete batching plant with single-shaft mixer Capacity: 60 m³/h of fresh concrete Mixer capacity: 1500/1000 liters (1m³ of compressed concrete) Central lubrication system brand: ILC (Made in Italy) Control system: Fully automatic PC - PLC - Printer. Electronic equipment: Siemens Other equipment and accessories: Italian made Unlimited users and remote access Very low transport costs: Two containers. Installation and commissioning of the plant is our responsibility. We provide excellent after-sales service. 24/7 SERVICES. Export of more than 1000 concrete production plants to over 90 countries worldwide. * LOW SHIPPING COSTS (two 40F-OT containers or two standard trailers) * FAST INSTALLATION * EASY AND SIMPLE TO USE

Sąlyga: naudotas, Gamybos metai: 1998, Turning length 3500 mm Swing diameter 1000 mm Centre height 500 mm Ksdpfsv Hhv Isx Aa Rsdw Turning diameter over cross slide 600 mm Machine weight approx. 8.5 t incl. 2 steady rests and 900 mm faceplate

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 650462292, Further options and accessories Notes MARINI IRON T-BOX 50 MOBILE ASPHALT MIXING PLANT Year of manufacture: 2021 Operating hours: New - Production capacity: 50 t/h - CE certificate - Mobile: 1x 40' HC sea container - Feed hopper: 3 - Capacity: 5 m³ - Drying drum: continuous Kdjdpehd Nb Iofx Aa Rjw - Burner: Marini CF 04 with 7.3 MW - Mixer: rotary - Filter system: 180 m² filter surface - Control cabin with automatic and manual Marini control system - 1 year warranty Input errors and mistakes in this offer are explicitly reserved. Only the specific agreements in the order confirmation or purchase contract are binding. More construction machinery and mixing plants on our website Further information Intended use: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 612 mm, Y ašies eiga: 5 645 mm, Z ašies eigos atstumas: 1 250 mm, stalo ilgis: 7 000 mm, stalo plotis: 2 500 mm, veleno greitis (maks.): 4 500 aps./min, atstumas tarp stulpų: 3 800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table clamping surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Speed in 2 stages, digital spindle drive: 60 – 4,500 rpm Kodpfx Aasxgr Eps Rjdw • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" screen • Tool changer with 60 positions • Rotary table for operating multiple milling heads with automatic milling head change, including collet system for accommodating various milling heads, quick couplings for hydraulics, coolant and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), 45° milling head automatic • Crossbeam motorised traversable (for positioning only) • Operator platform: 2 operator platforms with safety enclosure and integrated control panel, traversing in X-direction, each with 2 doors • Chip conveyors on both sides of the table as well as a cross conveyor • Longitudinal drive X-axis and cross drive Y-axis by rack and pinion and 2 servo motors (electronically preloaded backlash-free, master-slave principle) • Vertical adjustment Z-axis via ballscrew (Ø 80) and preloaded double nut • Zayer guideway system consisting of inserted or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each running surface • Counter guides for all axes additionally coated with plastic for optimum damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for the completeness or correctness. The actual technical specifications and functions of the machine are binding.

Sąlyga: geras (naudotas), NC Rotary Table with Motorized Drive Infinitely Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Total Height: 319 mm Kjdpfx Aaefr Ih Ds Rodw T-Slots: 7 pcs T-Slot Size: 22 H7 mm T-Slot Spacing: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optionally available with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the sector of machining and milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernizations

Gamybos metai: 2024, Sąlyga: naujas, RSS 600 Series Mono Rotor Shredder (new series) Pictured: Among others, a complete installation with feed belt or discharge screw for the plastics industry. 18.5 kW Kdedsirt H Aspfx Aa Rjw 40x40 mm knife block. Rotor length approx. 600 mm Feed hopper approx. 600 x 900 mm Screen size on request Equipped with pressure box guides and connections for feed or discharge belt and a motor cover. NL/CE certificate Suitable for various types of plastic, wood, or other materials. Modifications to e.g. motors, screen, and frame are possible. Feed and discharge belts, storage, and metal separation available. Larger or smaller models also available. Discharge belt and screw optional. If you have any questions, please call or email us—we look forward to hearing from you. Please include your name, company name, and phone number.