Orkaitė

SOLO Bac de trempe - 520-28/32/30

Būklė: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Ppsdpfstr Dinsx Adzjt Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Psdpfsiryyaox Adzept Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Max. Ø 114 mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114 mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system enables belt grinding without rotating the tube, delivering the best possible results. The feed system safely transports the straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 – 114 Number of stations: 1 Abrasive belt, dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3–22 Ppsdstzkgbepfx Adzjt Feed speed (m/s): 1–5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Overhauled, 12 months warranty, immediately available. Equipped with a safety system for solvent-containing materials according to DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and recirculation filter wall inside the chamber. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Volume: 1500 liters - Tmax: 300°C - Eurotherm Controller 2404 (20 programs, each with 16 segments) - Eurotherm Recorder - Connected load: 29 kW - 6 grid shelves included, as well as V2A (stainless steel) mounting brackets - Minimum exhaust airflow: 360 m³/h - Maximum permissible solvent quantity: 36 g at nominal temperature 300°C - With concentration measurement - Window seals new - Net weight approx. 1200 kg - Including documentation, CE declaration - Electrically inspected and supplied with DGUV test protocol Viewing possible by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Pjdpfevcb U Aex Adzspt Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, paint dryer, annealing oven, preheating oven, tempering oven, drying cabinet, chamber furnace, powder coating oven, recirculating drying cabinet, recirculating oven, solvent oven, chamber recirculating oven

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, available immediately, 12-month warranty, excellent condition Circulation oven for solvent-based materials according to DIN EN 1539, including 4 loading carts - Max. temperature 150°C (can be increased upon request) - Useful chamber volume: 1,875 liters Ppsdpfxoxbtvfj Adzst - Internal dimensions: W 1,250 x D 1,000 x H 1,500 mm - External dimensions: W 1,765 x D 1,425 x H 2,300 mm - Loading rails, recesses for feeding the oven with a loading cart - Maximum permissible quantity of combustible material at 150°C: 83.9 g - Minimum exhaust air flow at 20°C: 360 m³/h - KS 40-1 controller for basic temperature regulation with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON on request - Additionally equipped with a simple timer, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating capacity: 36 kW - Own weight: 820 kg - Supplied only with 4 loading carts, each with 12 trays and 24 stainless steel shelf levels - Documentation, CE declaration - Electrically tested and including current DGUV test protocol Viewing in our warehouse possible by appointment. Oven, ovens, drying oven, kiln, heating oven, heated cabinet, industrial oven, solvent oven, tempering oven, preheating oven, temperature oven, drying cabinet, chamber oven, curing oven, circulated air drying cabinet, circulation oven, paint dryer

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2021, veikimo valandos: 850 h, Funkcionalumas: visiškai funkcionalus, Be paminėtų ir pavaizduotų įrenginių, sandėlyje turime daugybę kitų mašinų ir priedų (smėliavimo sistemos, konvejeriai ir mažos mašinos). Mašinas galima įsigyti arba išsinuomoti. Kreipkitės į mus dėl (nemokamos) konsultacijos vibracinio, būgninio ir smėliavimo technologijų srityje. Ppjdpfx Aewfdbcodzet

Būklė: naudotas, Gamybos metai: 1991, Slėgis 100 t Pjdpfjvut Ufjx Adzjpt Stovo tarpas 770 mm Eiga 200 mm Atstumas stalas/stumoklis, eiga viršuje 800 mm Stalo paviršius 770 x 900 mm Stalo aukštis virš grindų 850 mm Traukimo pagalvės slėgis stale 40 t Traukimo pagalvės eiga stale 200 mm Traukimo pagalvės paviršius stale 600 x 600 mm Šoninis stovo praėjimas 600 mm Stumoklio paviršius 770 x 900 mm Leidimosi greitis nuo 62 mm/s Pakėlimo greitis iki 350 mm/s Darbo greitis 17,5 mm/s Alyvos tūris 700 l Variklio galia 42,0 kW Svoris 9,0 t Užimamas plotas (P x G x A) 2,6 x 2,0 x 3,8 m Su alyvos hidrauline pavara, valdymas priklausomai nuo slėgio/laiko ir eigos, hidraulinė traukimo pagalvė stale, pjovimo smūgio slopinimas, giluminis ribotuvas, dviejų rankų valdymas Fondo duobė nereikalinga

Būklė: labai geros būklės (naudotas), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven/heat cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows treatment of large or multiple components simultaneously. The oven is controlled via a JUMO IMAGO 500 controller, enabling precise temperature control and automated programs. Typical applications: - Industrial production - Plastics and metal processing - Component drying - Heat treatment - Testing technology / materials testing - Laboratory and experimental applications The system is built robustly in industrial quality and designed for continuous operation. Ppsdpoytrzfsfx Adzot Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250°C Temperature safety class: TB Class 1 TWB Class 2 Internal chamber: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal housing load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connection power: 58 kW Other data: Minimum exhaust air flow: 600 m³/h Reduced exhaust air flow: 150 m³/h Purging time: 465 s Total steam volume: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter cutoff temperature: 280°C Temperature selector limiter: 270°C Weight: 1850 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Unit: “Touchpanel” All control and operation commands can be executed simply by touching the function icons on the touch panel. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These feedthroughs allow measurement lines and test devices to be routed into the test chamber space. Feedthroughs: 1 feedthrough ∅ 125 mm installed on the right 1 feedthrough ∅ 50 mm installed on the left Pedorvx Ezepfx Adzopt Volume: 990 liters Test Chamber Interior Dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature testing: Minimum temperature: –70 °C Maximum temperature: +180 °C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K Temperature change rate (heating): 4 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 2750 W Data for climate testing: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% r.h. Operation data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 29A Rated power: 19.8 kW Refrigerants: R-452A / R23 Weight: approx. 910 kg Important information for your safety as a buyer! The following checks and preparations are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, replenishment with legally compliant refrigerants 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in the listed data!) If you have any further questions, we will be happy to answer them by phone.

Būklė: naudotas, Gamybos metai: 1996, Spaudimas: 100 t Išsikišimas: 510 mm Eiga: 600 mm Montavimo aukštis: 1000 mm Stalo paviršius: 1025 x 650 mm Traukos pagalvės jėga: 25 t Traukos pagalvės eiga: 200 mm Ppjdpfovuunmjx Adzst Traukos pagalvės paviršius: 600 x 400 mm Stalo aukštis nuo grindų: 970 mm Stūmoklio paviršius: 1025 x 650 mm Leidimosi greitis: nuo 350 mm/sek Kėlimo greitis: 330 mm/sek Darbinis greitis: 30 - 43 mm/sek Alyvos kiekis: 540 l Bendras energijos poreikis: 48,0 kW Apytikslis mašinos svoris: 12,0 t Reikalinga erdvė: apie 1,2 x 2,7 x 3,9 m Su alyvos hidrauline pavara, hidrauline traukos pagalve stalo viduje Galimas paruoštos „dvynės“ mašinos - su nauja valdymo sistema - vaizdo įrašas