Horizontalios tekinimo staklės

SMEC Samsung 3500 XLY

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis increment: 0.001° - Maximum Turning Length: Kodpfx Agowdrfgs Hond - Cutting Feed Rate (X, Z, Y): - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main) - Rapid Traverse Max. (X, Z): - Main Spindle: 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque (Nm): - Main Spindle Bore: - Main Spindle Nose: A2-6 - Sub Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque (Nm): - Sub Spindle Bore: - Sub Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip Conveyor - Three-color Status Lamp - Fixed Tool Holders - Parts Catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Sąlyga: naudotas, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar Capacity: 205 mm Workpiece Clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece Clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of the spindle head) Tool Turret (X/Y/Z): Technology: 12-station turret Tool Interface: BMT 75 Driven Tools: 3,000 rpm, 7 kW, 83 Nm Travel in X/Y/Z: 340/160/3,250 mm Rapid Traverse in X/Y/Z: 20/7/12 m/min Kjdpfewt Iwqjx Ag Hend Tailstock: Technology: Programmable quill, dragged tailstock Stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip Management: Chip conveyor Coolant Management: High-pressure coolant pump (IKZ) Tool Measurement: Measuring arm, Renishaw RP3 Oil Mist Extraction: Mechanical separator, manufacturer AR Filtrazioni ARNO 3VF YF Shaft Machining: Manual steady rest, ø150-300 mm Tool Holders: Various fixed and driven holders Setup Operation: Electronic handwheel Additional Features: Automatic door (pneumatic), transformer, oil skimmer Other Accessories: Various jaws and EWS quick-change adapters

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Kedpfovv Tvfex Ag Hond Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Sąlyga: naudotas, Gamybos metai: 2017, Doosan Puma GT3100M, 2017 metai Gamybos metai: 2017 Valdymas: Fanuc 0i-TF Tekinimo skersmuo: [mm] 376 Tekinimo ilgis [mm] 1245 Pagrindinis velenas: Diržinis veleno pavara Maksimalus apsukų skaičius 2800 aps./min. Maksimali galia Knjdpfx Agexggkte Hjd 22 kW Maksimalus sukimo momentas 1124 Nm Strypo pralaidumas 102 mm 3-žandų griebtuvas, Schunk ROTA THW plus 315-104 12 padėčių revolverinė galvutė BMT65 revolverinė galvutė Poslinkis X/Z ašyse 260/1350 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 760 mm, sukimosi skersmuo virš skersinio stumduko: 780 mm, tekėjimo skersmuo: 376 mm, ašies variklio galia: 22 W, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 82 mm, X ašies eiga: 260 mm, Y ašies eiga: 105 mm, Z ašies eigos atstumas: 830 mm, tvirtinimo skersmuo: 24 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 80 mm, tvirtinimo įvorės skylė: 80 mm, Strypo skersmuo (maks.): 80 mm, CNC Turning-Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has been used very little, with approximately 1,730 power-on hours, so it is as good as new and will be available from 01.01.2026. Additional accessories for the Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 parting tool holder - 1 double right-hand tool holder for external tool (sub-spindle) - 1 double left-hand tool holder for external tool (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub-spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle + one collet each diameter 50 mm + 30 mm - 1 collet chuck for sub-spindle + one collet each diameter 50 mm + 30 mm - 1 set of reduction sleeves for diameter 50 (10 pieces) - 1 set of reduction sleeves for diameter 32 (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling arbor) Ksdpoxauwbjfx Ag Hsnd - Flushing device with emulsion on main spindle for automatic cleaning of chuck jaws - Device for automatic cleaning of chuck jaws with compressed air - Additional high-pressure pump for internal coolant supply (for drilling with indexable insert drill) - Function for automatic machine shutdown (the machine also switches off the main switch, thus disconnecting the power supply) - Connection for automatic bar feeder magazine Iemca

Sąlyga: labai geros būklės (naudotas), šlifavimo ilgis: 3 500 mm, plotis centre: 5 000 mm, Cylindrical grinding machine Manufacturer: Joh. Schehr Meuselwitz Model: SAXW 1000 Weight: 33 tons Center distance: 5000 mm Grinding length: 3.5 meters Concave and convex grinding directions Total length: 9.6 meters Knjdpjwb Dq Nefx Ag Hsd Width: 3 meters Height: 2.4 meters 380 volts Machine can be inspected under power at the seller’s facility.

Sąlyga: geras (naudotas), Gamybos metai: 2018, Swing diameter: 600 mm Turning diameter: 310 mm Turning diameter over support: 355 mm Spindle bore: 53 mm Bar capacity: 45 mm Speed range: 6,000 rpm Turning length: 388 mm Travel - Z axis: 400 mm Travel - X axis: 220 mm Turret (positions): 12 Control system: SIEMENS 828D (Touch) C axis: 0.001° Total power requirement: 20 kVA Machine weight: approx. 4.5 t Space requirements approx. L x W x H: 3.7 x 2.0 x 2.0 m Including automation preparation (loading robot interface) Year of manufacture: 11/2017, delivered 2018 - Automatic door - 12-position tool turret, driven, 5,000 rpm - Workpiece catcher - RENISHAW probe, fully automatic swiveling - Tailstock Knodjwgi Hyspfx Ag Hsd - Chip conveyor - Coolant pump Accessories: Including collet chuck Including 2 driven tool holders (radial + axial) Including 9 fixed tool holders Including USB & LAN interface Including manuals

Sąlyga: naudotas, Gamybos metai: 2006, X ašies eiga: 980 mm, Y ašies eiga: 630 mm, Z ašies eigos atstumas: 630 mm, stalo plotis: 1 250 mm, stalo ilgis: 750 mm, sukamosios stalo skersmuo: 700 mm, DMG DECKEL MAHO DMU80 monoBLOCK HEIDENHAIN iTNC530 Rotary table: diameter 700 mm, table size: 1,250 x 750 mm 18,000 rpm spindle, HSK-A63 tool holder, automatic tool changer with 32 positions Ksdpfx Agsvxngde Hsnd Workpiece touch probe TS640, Blum laser tool measurement, chip conveyor

Sąlyga: naudotas, HWACHEON HVT2025M (C-ašis) / Modelis 2012 Plokštės skersmuo (mm): Ø2.000 Maksimalus skersmuo virš lovos (mm): Ø2.650 Maksimalus tekinimo skersmuo (mm): Ø2.500 Maksimalus pjovimo aukštis (mm): 1.100 Įrankių kiekis (vnt.): 14 (7 tekinimo, 7 frezavimo) Knsdpfx Asxb N U Reg Hjd Fanuc 31i 2 797 val. (darbo laikas)

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Siūlomas Mazak CNC 5 ašių tekinimo ir frezavimo centras su priešpriešiniu velenėliu. Švytavimo skersmuo: 820 mm, apdirbimo skersmuo: 820 mm, apdirbimo ilgis: 1500 mm, maks. ruošinio svoris griebtuve/tarp centrų: 650 kg/150 kg, pagrindinio veleno greitis: 1600 aps./min, veleno skylė: 185 mm, galia: 30 kW/40 kW, atramos jėga: 15 kN, pinolės eiga: 1466 mm, įrankio tvirtinimas: BT50, apsukos: 10000 aps./min, eigės X/Y/Z: 870 mm/500 mm/1600 mm, greitasis eiga: 40 m/min. Įrenginio matmenys X/Y/Z: apie 6500 mm/3700 mm/3200 mm, svoris: apie 26000 kg, valdymas: Mazatrol Matrix. Yra dokumentacija. Apžiūra vietoje galima. Įranga yra Kinijoje. Knjdpfx Asxf Ikleg Hsd