Galutinio apdorojimo mašina

SINICO TR 60/4-650

Workpiece diameter – max. 40 mm
Gjdpfjvp Sd Isx Acuobu
Workpiece diameter – min. 10 mm
Workpiece length: 200 – 640 mm
Control: PLC Siemens S5 95 U
Total connected load: 25 kW
Machine weight approx. 5 t
Required floor space approx. 8.5 x 2.8 x 2.35 m

Hydraulic automatic cut-to-length and double-end machining unit, suitable for pre-processing trapezoidal threaded spindles as well as other round workpieces, via bar cutting and simultaneous end machining such as chamfering, facing, and drilling, with stationary parts and rotating tools.

Machine consists of:
- Base machine model TR 60/4-650, workpiece length up to 640 mm
- Bar magazine for bar length 2 - 3.5 m
- Standard version for solid material up to 40 mm diameter
- Central position for bar feed rollers
- Bar feeding unit
- Standard version feed gripper
- Rotary indexing table with 4 clamping stations, model TR 300.00
- 4 base jaws, width 80/140 mm, diameter 75 mm
- Rotary indexing table pivotable in both directions
- Saw unit with worm drive TR 200.00, stroke 100 mm
- Saw blade 350 mm, speed 25/39 rpm
- Motor power 2.6 / 3.2 kW
- Motorized positioning of the saw head
- Automatic positioning of the saw frame with hydraulic clamping
- Saw blade guide
- Machining unit no. 1 – USP.00/M
- Speeds 842/1684 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mount ISA 40/M 16
- Toothed belt drive
- Machining unit no. 2 – USP.00/M - UF
- Speeds 360/720 rpm, kW 1.8/2.8
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mount ISA 40/M 16
- Toothed belt drive
- Thread cutting attachment for right and left handed threads
- Machining unit no. 3 – USP.00/M
- Speeds 842/1684 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mount ISA 40/M 16
- Toothed belt drive
- Machining unit no. 4 – USP.00/M
- Speeds 943/1882 rpm, kW 3.3/4.0
- Working stroke 80 mm
- Rapid traverse 40 mm
- Spindle mount ISA 40/M 16
- Discharge chute
- Metric rulers for all adjustment movements
- Hydraulic system with feed pump SAUER SUNDSTRAND
- Accumulator
- Rexroth flow controller for machining units and saw
- Coolant system with filter and tank
- Coolant pump CALPERA
- Electrical installation in separate control cabinet,
Control voltage 24V/50 Hz
- PLC SIEMENS S5 95 U
- Machine light
- Signal beacon for machine stoppage
- Central lubrication
- Chip conveyor

In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for €25,000. Additionally, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were also replaced.

In recent years, the machine has seen very little use; the total operating hours are estimated by the seller at around 24,000.

This is a used machine, therefore we sell under exclusion of any warranty.

STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.