Suvirinimo stalas

SIEGMUND Professional 750 4000 x 2000 m

Būklė: naujas, Table length: 3000 mm Table width: 1500 mm Table height: 850 mm Side clamping surface height: 200 mm Weight: 1518 kg SIEGMUND Authorized Dealer – all items available! Product Description: - High-quality S355J2+N steel + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Holes Ø 28 mm - Hole grid on surface: 100 x 100 mm - Rounded corners, edges, and holes - Side panel height: 200 mm - Hole spacing on side panels: 50 mm - Including surface scale - Rib-reinforced construction - Grid lines allow precise setups The welding tables are equipped with a scale as standard. Special Set – includes 28-piece Tool Set 3 Ijdpfxsw U U N Uo Aldeth Plasma-nitrided Version: - Protection against rust / scratches / weld spatter adhesion - Corrosion resistant / higher load capacity Features: - 28 mm hole system / Dimensions: 3000 x 1500 x 200 mm - Plasma-nitrided version with scale - Includes 6x standard foot kit - Includes 28-piece Tool Set 3: + 10x 280610.N Clamps + 6x 280630.N Clamps + 4x 280648.1.N Prism + 24x 280510 Pins + 4x 280740 Magnetic Pins + 8x 280410.N Stops + 8x 280420.N Stops + 6x 280110.N Angle Brackets + 2x 280152.N Angle Brackets + 2x 280162.N Angle Brackets + 1x 280166+67.N Angle Bracket + 1x 283999 Accessory Set

Būklė: naudotas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Itodpet Hw U Njfx Aldoh Total power requirement: kW Machine weight approx.: t Space requirements approx.: m

Būklė: naudotas, Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Scope of delivery ►1 unit – Gas-heated large powder curing oven ►1 unit – Automatic powder coating booth ►1 unit – Electrically heated small powder curing oven ►2 units – Room-type mono-cyclone manual powder coating booths ►6 units – Automatic powder coating guns ►3 units – Manual powder coating guns ►1 unit – Automatic powder recovery system ►6 units – Mono-cyclone où1 unit – Automatic control panel ►1 unit – Automatic bar movement system with speed control ►2 units – Mobile platform with speed control ►8 units – Parking station ►300 m – Conveyor rail (1,000 kg capacity) Iedpfjiivq Usx Aldoth ►12 units – Hanging rods Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to make an appointment to view the machinery. The system has been in operation for 10 years. As we are the direct manufacturer of the system, we can carry out any modifications to the machinery you require by mutual agreement. Does the system not fit your existing installation site? We can adjust the layout to suit your needs. Please check the system PDF file via the link below.

Būklė: naujas, The perfect layer for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface and forms a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and pre-treated. Oils, contaminants and other impurities are removed to ensure a clean surface. This is crucial for the powder to bond effectively with the substrate, resulting in a robust and long-lasting finish. Components of a Powder Coating System A powder coating system typically consists of various components and equipment necessary for the application and curing of powder coatings. Spray Booth and Spray Area Isdpfoun Sd Uox Aldjth The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Supply System The powder supply system comprises a hopper or container to store the coating powder. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pretreatment Equipment Pretreatment systems prepare the substrate before the powder coating is applied. This includes processes such as cleaning, degreasing, rinsing, and surface treatment, to ensure good adhesion and durability of the coating. 🧼 Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder coating to melt, flow and cure to form a durable finish. The oven typically consists of a conveyor system or racks for transporting coated parts through the oven chamber. 🔥 Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a solution for powder coating? Seeking a custom powder coating solution? We specialize in delivering tailored powder coating solutions to meet your individual requirements. Whether you have specific color requirements, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements and let us develop a custom powder coating solution for you. 📞 Contact us today!

Būklė: naujas, Gamybos metai: 2025, keliamoji galia: 1 000 kg, Various heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 Itodpfx Alowu Exzodoh - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300 (plasma nitrided: €3,300) - 2.4 x 1.2 meters, €2,900 (plasma nitrided: €3,900)

Gamybos metai: 2002, būklė: geras (naudotas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard Itjdpolz Rvlsfx Aldsh X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all important details.

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Isdpfxjwbknbo Aldjth Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Gamybos metai: 2007, būklė: paruoštas naudoti (naudotas), - NAUDOTAS - 8 ašių CNC tekinimo centras su frezavimo galva, apatine revolverine galva ir priešpriešiniu velenėliu ATSTUMAS TARP CENTRŲ: 210 - 1290 mm MAKS. TEKINIMO ILGIS: 1090 mm MAKS. TEKINIMO SKERSMUO: 245 mm JUOSTOS TALPA: 65 mm VELENAS: 11-15 kW; 221,5 Nm PRIEŠVĖLENIS: 6000 aps./min.; 7,5 - 11 kW GALVA: HSK A63; 3,7 - 5,5 kW X1 AŠIES EIGA: 455 mm X2 AŠIES EIGA: 222,5 mm Y1 AŠIES EIGA: ± 70 mm Y2 AŠIES EIGA: +20 -50 mm Z1 AŠIES EIGA: 1090 mm Z2 AŠIES EIGA: 1005 mm B AŠIES EIGA: 1080 mm Iedpfxoxppnmj Aldoth GREITOJI EIGA X-Y-Z: 16 - 6 - 16 - 40 m/min VAROMOJI REVOLVERINĖ GALVA: 12 + 12 padėčių; 6000 aps./min.; 3,7 - 7,5 kW AUKŠTO SLĖGIO AUŠINIMAS: 25 bar VALDYMO BLOKAS: FANUC 31i-A JUOSTOS PATEIKĖJAS: LNS mod. Hydrobar Sprint S3 SVORIS: 16000 kg BENDRI MATMENYS: 5551 x 2925 x 2755 mm PRIEDAI: AUKŠTO SLĖGIO AUŠINIMAS; DROŽLIŲ KONVEJERIS; RUOŠINIŲ KONVEJERIS

Gamybos metai: 2000, būklė: geras (naudotas), Pressing force 28 t X-axis 2000 mm Itsdpfx Aji Eld Ueldoh Y-axis 1000 mm Machine weight approx. 11,000 kg

Būklė: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM fixture components with a bore diameter of approximately 1.6 cm. This allows you to create the ultimate, high-performance, compact mobile workstation. Expand your clamping and positioning options and be ready for new projects with the GERD WOLFF Welding Table Workbench + Fixture Set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and positioning during welding and fabrication. Clamp and position at any point on the reversible, double-sided, precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop for accurate setups every time. Technical Specifications Itsdpfoxqrhlox Aldjh Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Tabletop flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8 inch = 1.5875 cm) 2 x Inserta Clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side Clamps, suitable for 1.5875 cm holes 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT522K) 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-Pads for the tabletop 2 x Locating Pins, suitable for 1.5875 cm holes 2 x Angle Brackets, 1.5875 cm holes (T50305) 2 x Angle Brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-Block Spacers, suitable for 1.5875 cm holes 8 x D-Stop Bars, 1.5875 cm holes 8 x V-Blocks, suitable for 1.5875 cm holes 10 x Ball-Lock Bolts, suitable for 1.5875 cm holes 12 x Magnetic Support Pins