Tekinimo staklių galvutė

SCULFORT FACICAP

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 32 mm Fpsdpfjuha Elsx Ab Ssb - Travel distance: 310 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE - Maximum bar diameter: 32 mm - Z travel distance: 150 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.01° - Number of turrets: 1 UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSH HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg EQUIPMENT - Control unit: Fanuc 16 iTB - 3-color status tower - Parts catcher - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 242350148, -WT 106- Fedpfx Abolf Evcj Sjpb Offered here is a bench drill press from Flott, model TB23L. The drill press is mounted on a special lift table (not the original lift table). Technical data: - 6-step speed adjustment (manual via belt pulley) - MK2 taper

Sąlyga: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 Fpsdpok Egrpjfx Ab Ssb - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Sąlyga: naudotas, Gamybos metai: 1982, mašinos/transporto priemonės numeris: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Fodpfx Absiqkc Ij Sspb Table size: 860x240mm, 3 T-slots 14mm, spindle mount SK30, Travel paths: X/Y/Z = 450/200/430mm, horizontal speeds: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 vertical milling arbor supports, 1 collet chuck with key, 1 machine vice with hand crank.

Sąlyga: naudotas, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of Manufacture: 1973 Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Cross rapid traverse 3 m/min Vertical feed 0.001 – 0.020 mm per feed pulse Vertical rapid traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Motor power hydraulic pump 2.2 kW Motor power grinding spindle 5 / 6 kW Electrical connection 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic table longitudinal movement - Grinding wheel dressing unit on the spindle head - Electromagnetic plate, construction height 83 mm - Side-mounted coolant unit with magnetic filter in the filter housing - Recirculating grinding spindle lubrication - Freestanding electrical cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts list Space requirements L x W x H: 3000 x 2200 x 2100 mm Fodpfxod Hbafj Ab Sspb Weight of surface grinding machine: 3000 kg Weight of control cabinet: 200 kg Good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Fpjdount Eyspfx Ab Seb Extensive accessories included.

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Fodportd Uwjfx Ab Sspb Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Gamybos metai: 1990, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Tangential Surface Grinder Brand: Jakobsen Model: 1432 Year: 1990 Spindle speed: 1400 rpm Grinding area: 800 x 400 mm Table size: 1000 x 350 mm Fsdjiv S Avspfx Ab Sopb Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350 x 50 x 127 mm Equipped with Heidenhain ND 221B digital readout. Selter electronic magnetic chuck, 800 x 350 mm, with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET brand filter, manufactured in 2007. Includes sets of grinding wheels (see photos).

Gamybos metai: 1971, Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 713406, -KOM 105- Offered here is a high-performance industrial grinding machine from Kehren & Co, equipped with a paper band filtration system from FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine is fitted with 2 grinding tables/magnetic chucks for pendulum processing. Technical specifications: Segment Grinding Machine: Manufacturer: Kehren & Co Model: D7B Year of manufacture: 1971 Serial no.: 713406 2 grinding tables/magnetic chucks, each with 700 mm diameter Grinding method: segment grinding Control: Marposs Weight: 6,600 kg Paper Band Filtration System: Manufacturer: Faudi - Filtersysteme Model: AFB 1.3 / 1001 Fpedpfx Aog Nt A Esb Seb Year of manufacture: 1992

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Fodpfx Absgf H Sao Sjpb Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m