Šildymo alyvos talpykla Dyzelino talpykla HVO talpykla

Schneider Tankbau 50m³ Stahltank nach DIN 6616/D

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Manufacturer: Greif Velox Year of manufacture: 2020 Model: BVP Particle size: 30 μm - 5 mm Bag size: 9.5 - 30 kg Fjdewcfwyjpfx Ab Ssft Bagging capacity: up to 250/hr Packaging: Valve bags made of paper, PE, PP woven fabric Fully automatic single-spout system with bag feeder, 500-litre pre-hopper, dust extraction system without collection bin, control panel. 1x conveyor belt 650 x 2,000 mm

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm Ffjdpstr Dinofx Ab Set L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Gamybos metai: 2022, Sąlyga: naujas, Tank and Environmental Protection Wozniack Certified Specialist Company according to Water Resources Act Dear Sir or Madam, We offer a 50,000 litre double-walled storage tank for the storage of heating oil. Nominal capacity: 50 cbm, new Paint finish: RAL 7035 Material: Steel-in-steel, grade S235JRG2 Documentation: Manufacturer’s certificate / nameplate 1 piece dipstick 1 piece vent nozzle Ffodpeh Ukupjfx Ab Sjt 1 piece filling port 1 piece new limit value controller 1 piece new leak detection device 1 piece ladder 1 piece suction line Container dimensions: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 9,000 kg Above-ground storage Delivery time: September Best regards from Warstein Tank and Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Sąlyga: naudotas, Gamybos metai: 2002, veikimo valandos: 11 800 h, mašinos/transporto priemonės numeris: NEW-12,

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Heating Oil Tank – Storage Container – Diesel Tank – Tank System – Steel Tank Brand new – with a capacity of 50,000 liters – in accordance with EN 12285-2 – Class B (replacement for DIN 6616), above ground, double-walled, incl. inspection certificate, suitable for installation in areas classified as earthquake zone 0. The tank features two saddle feet, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW closure (filling cap) and dip tube - 1 gauging pipe with dipstick and dipstick seal - 1 vent pipe with vent hood - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection liquid The tank is externally sandblasted, primed, and coated in white / RAL 9016 color (sample photo). (Other RAL colors available upon request!) Fjdpfx Asi A Hz Aeb Sjft L = approx. 10.70 m – D = 2.50 m – Weight approx. 9.5 t – Ex works, loaded free of charge General Information: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! In addition, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly empty, clean, dismantle, and remove them.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Heating Oil Tank – Diesel Tank – Steel Tank – Tank System Fedpfei Arumox Ab Soft with a capacity of 20,000 liters, according to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is equipped with two saddle supports, a DN 600 manhole with dome cover, is used, emptied and professionally cleaned inside, and is supplied with the following fittings: - 1 filling pipe with TW closure (filling cap) and dip tube - 1 gauging pipe with dipstick and dipstick closure - 1 vent pipe with vent cap - 1 brand-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection fluid The tank will be newly primed and painted on the outside (RAL color shade). L = approx. 6.90 m / D = 2.00 m / Weight approx. 4.2 t / ex works, loaded free of charge. General: The price for the filling station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at an extra, cost-effective price.) You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can professionally empty, clean, dismantle, and remove them with certified specialist company qualifications according to the German Water Resources Act (§ 62 WHG). Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse

Sąlyga: visiškai atnaujintas (naudotas), Used storage tank made of steel according to DIN 6616/2 (with inspection certificate), double-walled, suitable for above-ground storage, equipped with saddle supports, 1 manhole, optical leak detector, overfill prevention device, and complete tank fittings consisting of: - 3" fill pipe with TW cap - 1" dip tube with measuring rod - Euroflex 3 suction combination (max. 150 l/h) - 1 vent nozzle 2" with vent cap. The tank is factory-equipped with the aforementioned fittings and is cleaned inside. Capacity: 60,000 litres Diameter: 2,500 mm Length: approx. 12,650 mm Weight: approx. 9,950 kg The tank can be newly painted in your desired RAL colour and optionally equipped with a ladder including an operating platform. Cost-effective delivery with our own truck is possible. Simply let us know your delivery location and you will promptly receive the exact freight charges. If you require further information, feel free to call us or send us an email. Trade-in and purchase of tanks/containers possible—just ask us! Ffedpsvm Uxiefx Ab Sjt Delivery time upon agreement! Tank und Apparate Barth GmbH Werner-von-Siemens-Str. 36 76694 Forst

Gamybos metai: 2022, Sąlyga: naujas, Tank & Environmental Protection Wozniack – Certified Company under the German Water Resources Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank suitable for the storage of heating oil and diesel fuel. Nominal volume: 50 cbm, new Coating: Paint RAL 7035 Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate / Identification plate 1 x Dipstick 1 x Ventilation nozzle Fodpoh Um Ehjfx Ab Ssft 1 x Fill nozzle 1 x New overfill prevention device 1 x New leak detection unit 1 x Ladder 1 x Suction line Tank dimensions: approx. 10,900 mm Diameter: approx. 2,500 mm Weight: approx. 9,000 kg Above-ground installation Delivery time: September Best regards from Warstein, Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Sąlyga: labai geros būklės (naudotas), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser Laboratory Stand Dissolver Type: GFD 11 LST Intended use: The machine is designed for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can vary from low-viscosity to highly viscous materials. Machine construction: The laboratory stand dissolver essentially consists of the machine stand, lifting device, drive for the mixing tool, telescopic hood with spring-loaded pressing, collet chuck, and control cabinet (non-Ex) with control unit and compact controller. The container (customer-supplied) and the telescopic hood form a closed mixing chamber during operation. The hood is equipped with a hose connection designed for various applications. The mixing tool drive features stepless speed adjustment via a frequency inverter. Motor arrangement, performance data, and speeds can be found in the attached project drawing. The display of the compact controller shows the mixing tool speed, mixing time/remaining time, mixing sequences, and other functions. Operation: Switching the machine on and off is done via the corresponding pushbuttons on the control cabinet. Raising the mixing tool drive: Lifting is carried out by activating the lift motor. The lift operates only as long as the pushbuttons (two-hand safety circuit UP-UP) are pressed. Once released, the arm remains at any chosen height. Lowering the mixing tool drive: For lowering, the corresponding pushbuttons (two-hand safety circuit DOWN-DOWN) on the control panel must be pressed. Mixing tool change: The mixing tool shaft features an M8 connection thread. Depending on requirement, the mixing tool (customer-side stirring star) can be unscrewed and exchanged. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 rpm via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75), customer-side Mixing tool: Stirring star, customer-side Ffedod Edm Sopfx Ab Sjt Control panel / display The machine is mainly operated via the compact PLC controller “Vision 560-T25B”. Safety-relevant functions, such as main power disconnection via the main switch, emergency stop activation, and two-hand operation for opening or closing the mixing chamber, are excluded from this. The control panel consists of a backlit LCD display and membrane-sealed tactile buttons. Buttons labeled with a letter are assigned fixed functions. These can be activated regardless of the menu at any time. Once a function is activated, the relevant status is displayed in the upper right area of the "operation display" menu. You can toggle through the individual menu screens using the "M" up and down arrows. Type: GFD 11 LST Condition: used Scope of delivery: (see photos) (Changes and errors in technical data and specifications are reserved!) For further questions, please contact us by phone.

Gamybos metai: 2015, Sąlyga: labai geros būklės (naudotas), The device is for sale: It has low operating hours and is fully functional. Ffsdpfsncdwyox Ab Sst For technical details, please refer to the nameplate; of course, a complete operating manual is available for the device.