SCHNEEBERGER, LAMELLO, WSL, Lepus

SCHNEEBERGER, LAMELLO LEPUS und WSL

Būklė: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm Godpfexnlgcox Ah Aeit • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 19 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 90514 2019, pjūklo disko skersmuo: 710 mm, dantų žingsnis: 55 mm, šlifavimo disko skersmuo: 200 mm, bendras plotis: 2 662 mm, bendras ilgis: 2 540 mm, bendras aukštis: 2 640 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo srovė: 10 A, įėjimo dažnis: 50 Hz, disko skersmuo: 200 mm, šlifavimo disko skylė: 32 mm, šlifavimo veleno variklio galia: 3 000 W, pjūklo disko plotis: 8 mm, įėjimo įtampa: 400 V, bendras svoris: 3 200 kg, pjūklų disko skylė: 80 mm, galia: 10 kW (13,60 AG), šlifavimo skersmuo: 710 mm, ruošinio skersmuo (maks.): 710 mm, Įranga: sūkių greitis be galo kintamas, CNC pjūklų disko galąstuvas su drožlių daliklių šlifavimo įtaisu ir pjūklų diskų magazinu iki D=560mm be priežiūros darbui. Rankiniu režimu 40-710mm. Diskų magas su 3 tvirtinimo ašimis. Alyvos filtravimo sistema HSS ir HM, alyvos šaldytuvas Polar 2.9. Dantų formos HSS: forma A, B, BW, C ir specialios dantų formos. TK pjūklų diskai gali būti šlifuojami 200-500mm skersmens. Priešgaisrinė sistema – alyvos perdirbimo komplektas su aerozolio gesintuvo generatoriumi. Su elektrostatine oro nutraukimo sistema. Gjdoxuq I Espfx Ah Aoit

Būklė: geras (naudotas), Gamybos metai: 1971, mašinos/transporto priemonės numeris: 170119003210A0, Offer 25217 Technical Specifications: - Keyway width: 3 to 36 mm - Maximum keyway length: up to 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 – 0.22 mm - Cutting speed: 2 – 10 m/min - Return speed: 20 m/min - Maximum tensile force: 1.5 t - Maximum workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operator height: 1050 mm - Drive: 400 V / 3 kW - Required floor space: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as pictured Godpfxowu Suvs Ah Ajit

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications Gijdpfx Aouyh Rpjh Aet The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, precision workstage with a measurement range of 250 mm x 125 mm. It is ideal for precise optical inspections in environments where reliability and accuracy are top priorities. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands functionality by enabling geometric measurements, including the calculation of angles, radii, and distances. It also allows for the creation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive report generation, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlays. These capabilities make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing Gijdpfx Aot Hww Dsh Ajt • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: labai geros būklės (naudotas), HSS saw grinding machine VOLLMER model CMS 10M Giedpfx Ahsi Hchdo Ajt

Būklė: naujas, Bernardo Drill Bit Grinding Machine DG 32 Pro Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • Diamond grinding wheel SBC • ER 20 collets, 3 – 12 mm, 10 pcs (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) Gedpfx Ahegd H U Ue Aoit • Tool holders for ER 20 and ER 40 collets Features • Including tip thinning device, ensuring better centering of the drill point on the workpiece and reducing the required feed force • 30 ER collets included, suitable for clamping intermediate sizes • Additional station for relief grinding of the drill cutting edges (clearance angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures high smoothness of operation • Fast and precise results due to simple operation • Vibration-free operation thanks to heavy-duty base and rubber feet

Gamybos metai: 1994, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz Giodpfx Aogyd T Esh Ast

Gamybos metai: 1988, būklė: naudotas,

Būklė: naudotas, Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, VOLLMER CANA-E galandinimo staklės 9- CANA-E 1977 4.900€ Godpfx Ahex Spyde Asit 10- CANA-E 1977 4.900€ 11- CANA-E 1970 3.900€