Automatinės tiksliosios tekinimo staklės

Scherer Feinbau S1- So/KA 40

Būklė: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos Bwodpfx Asnzpx Rjahei - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Būklė: geras (naudotas), Gamybos metai: 1956, Heavy-duty lathe, lathe, engine lathe, lead screw and feed shaft lathe - Manufacturer: Weisser, Lead Screw and Feed Shaft Lathe Type PF200 - Turning length: 1340 mm - Swing diameter over bed: 420 mm Bwedpetzf N Rjfx Aahei - Swing diameter over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock quill taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Būklė: naudotas, Gamybos metai: 1979, Technical Details: Swing diameter over bed: 540 mm Turning length: 630 mm Center distance: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm stepless across 8 ranges Clamping diameter: 26 mm Feed range X-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range Y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MK5 Tailstock quill stroke: 250 mm Total connected load: 7.0 kW Machine weight approx.: 3.76 t Machine dimensions approx. (LxWxH): 3.2 x 1.2 x 1.8 m Application: Primarily used for reverse turning and relief grinding of cutting tools (especially hobbing cutters with and without thread pitch). Reverse turning and relief grinding is possible from the front side, the rear side, and in the axial direction of the machine. Main drive via 8-step manual gearbox. Feed gearbox designed as 12-step manual gearbox. Rear slide swiveling range = 360° Cross slide swiveling range = 360° Chuck is a taper disc Ø 200 mm with MK5 Equipment: Bwedpfjvbhv Rex Aahei Mandrel Ø 49.5 x 400 mm Measuring system ARBAH-L 3+1 Frequency inverter FRENIC 5000G11 3-jaw chuck Ø 250 mm In stock. *

Būklė: naudotas, Gamybos metai: 1970, Weiler lathe with tailstock Bwjdpfshtnu Tjx Aahoi

Gamybos metai: 2007, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1380-1207, mit Siemens Sinumerik Bedienpult mit Späneförderer Bedienpult Schaltschrank Spindeldurchlass 60 mm Bedpfx Aajm Nb Riohewi max. Werkstücklänge 340 mm

Būklė: naujas, Centre length ----- 1000 mm Centre height ----- 230 mm Swing diameter ----- 460 mm Spindle bore ----- 58 mm Bed width ----- 300 mm Spindle speed ----- 25-2000 rpm Motor ----- 5.5 kW Weight ----- 1750 kg INCLUDES * 3-axis digital readout by SINO * Multifix TOOB2 quick change tool post with 4 holders * 250 mm self-centering 3-jaw chuck * 320 mm independent 4-jaw chuck * 350 mm faceplate * Fixed and travelling steady rests * LED work lamp and coolant system * Electric brake (CE) Bwsdpfjk Iug Tox Aahsi * Foot brake * Box with various tools

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 350523, Įranga: CE žymėjimas, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions: 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter over cross slide: 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for collets Schaublin Hainbuch / F38 / B32 Spindle speed: 50 – 5,000 rpm AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW AC motor drive – continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radial): 0.0005 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 32 x 5 mm FEEDS Working feed, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min REVOLVER TOOL SYSTEM Standard tool holder interface: VDI 20 Number of fixed/rotating tool stations: 8 / - Max. tool size: 16 x 16 mm Integrated coolant supply and bi-directional indexing: Yes COOLANT Tank capacity: 55 L Pump capacity: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill stroke: 70 mm Adjustable thrust force: 25 – 260 daN All technical data is provided without obligation and subject to errors or omissions. Fully overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint. Turret: Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed. Tailstock: Disassembled, inspected, and overhauled. Newly painted. Bjdpfx Asx Upugsahewi Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn/defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Z-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Electrical cabinet: Completely checked, various relays replaced. Paint: Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer's protocol. Various accessories checked and cleaned. Year: 2002

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Rotationskorb-Teilereinigungsmaschine zum Waschen von Motorblöcken und -teilen – Neumaschine Technische Daten: Korbdurchmesser: 900 mm Beladehöhe: 450 mm Beladekapazität: 300 kg Tankinhalt: 80 l Pumpendruck: 2,5 bar Pumpenleistung: 3,0 PS Heizung: 7,5 kW Elektrischer Anschluss (V/Ph/Hz): 220-380-415/3-1/50-60 Zeitschaltuhr: 0 - 90 Min. Arbeitstemperatur: 0-90 °C Verpackungsmaße: 1450 x 1080 x 1340 mm Verpackungsgewicht: 300 kg Hauptabmessungen: B x L x H: 1100 x 1100 x 1150 mm Gewicht: 350 kg Die Teilereinigungsmaschine ist auch in größeren Ausführungen erhältlich! Größere Modelle: AWM1250: Mit 1.150 mm Korbdurchmesser und 200 l Tankinhalt AWM1500: Mit 1.350 mm Korbdurchmesser und 300 l Tankinhalt Bwjdponcfmvefx Aahoi Bei Interesse nehmen Sie bitte Kontakt mit mir auf! Weitere Maschinen im Angebot: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Ventilschleifgeräte, Zylinderkopf- und Blockplanscheiben, Ventilsitzfräser, Druckprüfgeräte, Teilereinigungsmaschinen

Būklė: naujas, Centre distance ----- 1000 mm Centre height ----- 160 mm Swing diameter ----- 320 mm Spindle bore ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 kW Weight ----- 560 kg INCLUDES Bwsdpfjrpn Uisx Aahei * 3-axis digital readout, brand SINO * Multifix TOOE5 quick-change tool post with 4 tool holders * 3-jaw chuck 160 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest * Foot brake (CE) * Electric brake (CE)

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), The Polygim Mini 88 is an extremely compact and user-friendly machine, specifically designed for efficient machining of simple parts. With its space-saving design and robust, durable construction, it offers the perfect solution for operations with limited floor space or for integration into existing production lines. Description | Technical Data | Unit -----|-----|----- Machine | Poly Gim MINI-88 | | 2-axis CNC Lathe with Fanuc 0iTF Plus Control | Spindle | Max. spindle speed | 100 – 5,000 | rpm Max. machining diameter (with chuck) | 60 | mm Max. machining diameter (with collet) | 60 | mm Max. machining length | 120 | mm Spindle motor 100% DC | 2.2 | kW Spindle motor 50% DC | 3 | kW Turning diameter | 60 | mm Bedpfowpgiwex Aahowi Turning length | 120 | mm Bar capacity | 26 | mm Travel Axes X-axis travel | 150 | mm Y-axis travel | 170 | mm Tooling Tool mount | 16 x 16 / Ø 20 | mm Hydraulic chuck | 4 | Smallest programmable increment | 0.001 | mm Accessories - Including RS232 and PCMCIA interface - Line graphic display - Flat guideways in Z-axis - Chip conveyor - Hydraulic hollow clamping unit for chuck and collet systems - Chuck Ø 100 mm - Parts catcher - 8-position turret and linear system - Centralized lubrication - Coolant pump