Cilindrinė šlifavimo mašina

SCHAUDT RFH 500

Sąlyga: naudotas, Cilindrinio šlifavimo staklės SCHAUDT RFH500 Ppodpfexbt Hkjx Ah Hsl

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): Psdpfxjurw Uyo Ah Hepl 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) - Separate low speed for part alignment

Sąlyga: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Pjdpjt Hwziofx Ah Hspl Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. Pedpoqt Dmyjfx Ah Hepl When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: naujas, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machines category, distinguished by its robust construction and long, supported guideways. Its heavy machine bed made of high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate accurate infeed. This setup is complemented by a standard position indicator with linear scales, allowing for straightforward monitoring of actual values. The machine’s versatility for internal and external cylindrical grinding, as well as taper grinding, is further enhanced by the hydraulically adjustable workhead. Buyers receive a comprehensive set of standard accessories, including an internal grinding attachment and a work lamp. Experience superior performance and precision with the RSM 500 A – request a quote now to optimize your grinding projects! Psdjncdx Nepfx Ah Hepl

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Psdperz Nflefx Ah Hepl Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Pedpfx Ahjvzhf So Hopl Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Sąlyga: naudotas, Medžiagos plotis 300 mm Ritės svoris 3 t Medžiagos storis 2 - 4 mm Psdjcdrmmepfx Ah Hopl Tiesinimo staklės, 7 volai, gam. Schleicher, tipas RM 6-95/160 Juostos plotis: 300 mm Juostos storis: 2 - 4 mm Tiesinimo skerspjūvis: 1200 mm² Įtampa: 220/380 V 50 Hz Galia: 3,1 kW Ritės laikiklis su prispaudimo voleliu, gam. Schleicher, tipas H-3 Maks. apkrova: 3 t Juostos plotis: 400 mm Įtampa: 220/380 V 50 Hz Galia: 3,92 kW be valdymo

Sąlyga: naudotas, Sheet width: 250 mm Coil outer diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: Expanding range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. (specify dimensions) Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Ppedpfxsfn Aqmj Ah Hel Unbraked decoiler with pressure roller Straightening machine MR 250/4: Strip entry height: 1250 mm The system has been dismantled, inspected, and freshly repainted.

Sąlyga: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition. Pedpfxsu Ng Dge Ah Hjpl