Įvairios mašinos

SCHAUBLIN

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341883, TECHNICAL SPECIFICATIONS Capabilities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardized spindle nose, enabling use of various collets and chucks with appropriate adapters. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm/60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° Gbodozb U Epepfx Afdon C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, dia. x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes stepless: 0–5000 mm/min Rapid traverse, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, intermittent power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5000 rpm Standardized toolholder mounting: VDI 30 Maximum turning tool section: 20 x 20 mm Integrated coolant Indexing in both directions Coolant: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position VDI 30 turret for 6 driven tools 1 pneumatically-operated tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 Brucker CM5 live revolving center 1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25, without EX nut 1 EWS ESX-25, without EX nut 4 short left radial toolholders, type B2, ref 4100.0100 1 ESX-25 collet holder, type E3, with EX25 nut and 5 mm collet 1 similar, without EX25 nut 3 tapping collets, Ø 4.5, 6, and 8 mm 1 toolholder for indexable insert drills, Ø 40 mm bore, type E1, ref 4100.00124 1 similar, Ø 32 mm bore, ref 4100.00107 1 similar, Ø 20 mm bore, ref 4100.00105 1 boring bar holder, Ø 8 mm, type E2, ref 4100.00108 1 similar, Ø 10, ref 4100.0109 1 similar, Ø 12, ref 4100.0110 2 similar, Ø 16, ref 4100.0111 1 similar, Ø 20, ref 4100.0112 1 similar, Ø 25, ref 4100.0113 1 similar, Ø 32, ref 4100.0115 1 similar, Ø 32 GARANT, long 5 steel protective plugs, type Z2, ref 4100.00130 1 axial left toolholder, C4 force, ref 4100.00103 1 pneumatically-operated support tailstock CM 5, ref 180-65.200 1 stand for microscope only, ref 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 fingers for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.– + VAT All technical information provided without liability for errors or omissions.

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Gsdpfxecxxx Ro Afdjbn Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Fanuc Series 20-T control Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Spindle speed: 5,000 rpm 8-position turret Minimum quantity lubrication Gjdpfx Aozb R Iasfdobn

Būklė: naudotas, Spaustuvų rinkinys, tekinimo griebtuvo įvorės laikiklis traukiamiesiems spaustuvams Spaustuvų griebtuvas, spaustuvų laikiklis, spaustuvų įranga Tinka BOLEY - LEINEN - SCHAUBLIN - WEILER Traukiamųjų spaustuvų tipas: 367E K28 DIN 6341 Spaustuvo skersmuo: 28 mm Spaustuvo ilgis: apie 105 mm Spaustuvo sriegis: TR 28 x 1,5 mm Kūgio kampas: 40° - Traukimo vamzdis su vidiniu sriegiu M 28 x 1,5 mm, rankenėlė rankiniam spaustuvo užveržimui - Traukimo vamzdžio ilgis iki sustojimo prie rankenėlės viduje: 457 mm - Traukimo vamzdžio išorinis skersmuo Ø 31 mm per 390 mm ilgį, Ø 32,5 mm per 67 mm ilgį - 31 vnt. traukiamųjų spaustuvų: Ø 1 / 2 / 3 / 3,5 / 4 / 4,5 / 5 / 5,5 / 6 / 6,5 / 7 / 7,5 / 8 / 8,5 / 9,5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20,5 / 21 / 22 / 23 / 24 mm Bendras svoris: apie 10 kg Gsdjzbhu Dopfx Afdsbn Gera būklė

Būklė: paruoštas naudoti (naudotas), Parduodamas Nikken CNC 400 besisukantis stalas labai geros būklės! Jis paruoštas Mazak M32 valdymui, tačiau pagal poreikį gali būti lengvai perdarytas. Disko skersmuo 400 mm. Matmenys I/P/A: 740/240/420 mm. Dėl papildomos informacijos mielai atsakysiu į klausimus. Gjdpfeya Dtmox Afdjbn

Būklė: naudotas, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] - Distance from vertical spindle to table surface: 310 [mm] - Distance from horizontal spindle to table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions (L x W x H): 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] ACCESSORIES Gbjdpfx Afeuhbw Njdjn - Swivelling vice - Coolant system

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 700 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 490 mm, stalo plotis: 305 mm, stalo ilgis: 1 100 mm, bendras svoris: 2 000 kg, įėjimo įtampa: 400 V, Schaublin 53 geros būklės. ISO-40. 5,1 kW. Gbodpfx Aey A Nbisfdon

Būklė: naudotas, Techninės detalės: x eiga: 700 mm y eiga: 450 mm z eiga: 450 mm Verpstės kūgis ISO: 40 (SK 40) Stalo tvirtinimo paviršius: 760 x 420 mm Gbodpfx Asvc Avhefden Stalo eiga išilgai: 10 - 500 mm/min (greita eiga: 1,4 m/min) Stalo eiga vertikaliai: 5 - 250 mm/min (greita eiga: 1,4 m/min) Verpstės apsukos – be pakopų: 32 – 1600 / 18 pakopų aps./min Verpstės galva pasukama į kairę ir dešinę: 10° į kairę / dešinę Pinolio vertikali eiga: 125 mm Padavimas be pakopų: 10 – 500 / 8 pakopų mm/min Greita eiga: 1,4 m/min Bendras galios poreikis: 6,5 kW Apytikslis mašinos svoris: 3,0 t Apytiksliai matmenys (IxPxA): 2,3 x 2,0 x 1,85 m Kitos savybės: Verpstės galvos nuotolis min./maks.: 2094 / 2544 mm Įranga: -Aplinkai skirta aušinimo skysčio pompa su tiekimu -Linijinė padėties matavimo sistema Heidenhain ND750 Priedai: -Mašininiai spaustuvai

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, valdiklių gamintojas: FANUC, valdiklio modelis: Series 0i/-MC, bendras aukštis: 2 580 mm, bendras ilgis: 2 150 mm, bendras plotis: 2 470 mm, stalo plotis: 750 mm, stalo ilgis: 540 mm, bendras svoris: 4 500 kg, veleno greitis (maks.): 8 000 aps./min, veleno veikimo valandos: 1 480 h, veleno nosis: ISO40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 20, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Schaublin 60 CNC puikiai tinka preciziškiems darbams ir mažoms serijoms. Šis įrenginys pasižymi labai aukštu matmenų ir formos tikslumu, puikiu veleno apvalumu ir itin kokybišku paviršiumi – idealiai tinka įrankiams gaminti, tiksliosios mechanikos ar medicinos/juvelyrikos pramonei! Standartinėje komplektacijoje: - Vidinis aušinimas (TSC) - Elektroninis rankenėlė Gbsdpfxeyu Rpkj Afden - Originali dokumentacija - apie 30 prispaudimo varžtų

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, MAŽAI NAUDOTAS - GE FANUC 20-T Gjdpfsy U Ntpox Afdobn

Būklė: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts Gbedpfx Afsrmkfnedon - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: BL278700, centro aukštis: 150 mm, sukimosi skersmuo virš skersinio stumduko: 177 mm, veleno skylė: 40 mm, tekėjimo skersmuo: 340 mm, veleno nosis: Camlock D 1-4, įvesties srovės tipas: trifazis, bendras ilgis: 1 730 mm, bendras aukštis: 1 300 mm, bendras plotis: 970 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 55 aps./min, tuščias svoris: 1 250 kg, bendras svoris: 1 250 kg, For sale is a Schaublin 150 precision lathe from Switzerland – one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been newly fitted with bearings, with the bearing set ordered directly from Schaublin. The slideways have been hand-scraped. Turning tests with 30mm round steel over a length of 200mm show cylindrical accuracy within 0.002mm. The machine comes with a comprehensive range of accessories: - 2x Reishauer 3-jaw chucks - Original Multifix B Mivesa tool post - Collet chuck attachment with lever closer - Complete set of Schaublin B32 collets, 2 to 28mm in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube - Steady rests - Machine documentation with catalog - Complete standard change gear set plus special gears - Conventional Schaublin tool post - Fixed and revolving centers Gsdpfx Aoy Uqx Hjfdsbn - Albrecht precision drill chuck - Coolant system - Digital readout The machine has seen little use in recent years and was only operated occasionally. Extremely robust construction, suitable for hard turning. Center height: 150mm Distance between centers: 630mm Spindle bore: Ø40mm Infinitely variable spindle speed: 55–3,000 rpm Feed rate: 0.05–0.35 mm/rev Spindle taper: MK5 Tailstock taper: MK3 Swing over cross slide: Ø177mm Swing over bed: Ø340mm Motor: 4.5kW Dimensions: 1,730 × 970 × 1,300mm Weight: 1,250kg The machine can be inspected and tested under power by appointment in 5023 Salzburg.

Būklė: labai geros būklės (naudotas), The used SCHAUBLIN 120 VM precision centre lathe is a Swiss-made manual lathe of medium/small size, with a centre height of 120 mm, a distance between centres of 600 mm, and a spindle bore of 25 mm. Godpjwqxcfefx Afdobn The machine is equipped with feeds and various accessories, already complete with electrical cabinet and wiring compliant with standards; accessories and condition as per photos.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, FAMUP MCP 45 CNC Machining Center TECHNICAL DATA Axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed Rates Working feed X, Y, Z: 10,000 mm/min Rapid traverse X, Y, Z: 30,000 mm/min Working thrust X, Y: 2000 N Working thrust Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of T-slots: 2 T-slot width: 14 mm T-slot spacing: 80 mm Max. table load: 100 kg Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10,000 rpm Tool Changer Magazine positions: 16 Max. tool diameter: 63 mm Max. tool length: 150 mm Gjdoq U Rm Hjpfx Afdobn Max. tool weight: 4 kg Tool change time: 1.7 sec Weight: approx. 3,000 kg No liability is assumed for the correctness, completeness, and accuracy of the information provided.

Būklė: labai geros būklės (naudotas), Naudotas stalinės staklės SCHAUBLIN 102N – tai mažų matmenų, šveicariškas preciziškas rankinis tekinimo staklės, atstumas nuo centro iki centro 102 mm, tarp centrų 400 mm, veleno kiaurymė 20 mm. Gbedowqxcxopfx Afdon Galima 1 vnt. (su ilga baze ir pavarų galva); su elektrine valdymo spintele ir standartiniais saugos įrenginiais; įranga ir būklė kaip nuotraukose.