Kelių verpstukų baro automatas

SCHÜTTE AF32S Dnt

Būklė: geras (naudotas), Gamybos metai: 2000, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, stūmoklio plokštės plotis: 600 mm, bendras ilgis: 25 000 mm, bendras plotis: 27 000 mm, bendras aukštis: 47 000 mm, bendras svoris: 43 000 kg, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Rjdjtiwgiepfx Af Aet Floor-level installation

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Rodeuxft Ejpfx Af Aet Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: labai geros būklės (naudotas), Perfekt erhaltene sechsspindlige INDEX MS 25 Mehrspindel-Drehautomat mit sechs Quer- und sechs Längswerkzeugführungen. Der Preis ist verhandelbar und abhängig von der gewählten Zusatzausstattung: Spannzangen, Werkzeugen, Späneförderer usw. Rsdpfoqhkuksx Af Aet Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, DOOSAN PUMA 2600LMB (2014) CNC LATHE WITH LIVE TOOLING AND “C” AXIS, Z TRAVEL 1,350 mm CNC: FANUC i Series, 10.4” Color LCD, EZ-Guide - Swing over bed: 780 mm - Swing over carriage: 630 mm - Max. turning diameter: 376 mm - Max. turning length: 1,245 mm - Travels: X 260 mm / Z 1,350 mm - Chuck diameter: 380 mm - Bar capacity: 102 mm - Spindle nose: ASA-A2-11 - Spindle speed: 2,800 rpm / 22 kW - Servo turret: 12 stations, BMT 65P* (1-station indexing: 0.25 sec) - Live tooling: 5.5 kW / 5,000 rpm - C-axis indexing: 0.001 mm - Tailstock quill diameter/travel: 100 mm / 100 mm INCLUDED EQUIPMENT: - 3-jaw hydraulic chuck Samchully HCH-15”, diameter 380 mm - C-axis 360° (0.001° increment) - Automatic tool presetter - Integrated tailstock - High-pressure coolant pump - Chip conveyor - Preparation, base and wiring for steady rest - Hydraulic steady rest SMW AUTOBLOK SLU-3.1 (20-165 mm) - Set of tool holders - Set of DOOSAN and FANUC manuals Rjdpsyb Sryjfx Af Ast CONDITION: Machine in good condition. Can be inspected under power. Immediate availability.

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Rjdpfx Afet Hw N He Ast Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Schütte AG20 multi-spindle automatic lathe Rodpfx Afjhrihys Ast

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rodpfxjyxpv Ss Af Aot Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: naujas, Gamybos metai: 2025, Dimensions (LxWxH): 0 x 0 x 0 mm Weight: 29 kg Total Power Requirement: 0.25 kW Circular Saw Blade Sharpening Machine SBS 8-70 - Saw blade diameter: 80 – 700 mm - Swiveling range of blade holder: -30° to +45° - Grinding angle: -20° to +20° - Speed: 2,850 rpm - Grinding wheel dimensions: 125 x 10 x 32 mm - Motor: 250 W Rodpfx Aev A Hhhef Ajt - Connection: 230 V / 50 Hz - Weight: 29 kg Scope of delivery: - Diamond grinding wheel for carbide-tipped circular saw blades - Grey cast iron base for enhanced precision - Rubber feet for dampened and low-noise operation - Spacer rings for different blade bores

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0000025, centro aukštis: 315 425 mm, ruošinio svoris (maks.): 3 000 kg, šlifavimo ilgis: 3 000 mm, šlifavimo disko skersmuo: 750 mm, bendras plotis: 2 700 mm, bendras ilgis: 11 000 mm, bendras aukštis: 2 200 mm, šlifavimo skersmuo: 630 850 mm, ruošinio svoris tarp centrų: 3 000 g, atstumas tarp centrų: 3 000 mm, šlifavimo ratuko plotis: 100 mm, padavimo ilgis Z ašis: 3 300 mm, šlifavimo veleno greitis: 1 000 aps./min, bendras svoris: 17 000 kg, sukimosi greitis (min.): 2 aps./min, sukimosi greitis (maks.): 250 aps./min, garantijos trukmė: 24 mėnesiai, greitas poslinkis X ašimi: 3 m/min, greitasis eiga Z ašyje: 6 m/min, įėjimo įtampa: 400 V, ruošinio veleno greitis (maks.): 250 aps./min, Įranga: sūkių greitis be galo kintamas, Cylindrical grinder BUC63/3000 CNC, brand new, in 100% condition, equipped with a Sinumerik ONE or INTRONIX TOS CNC control system. Rodju U Ewgspfx Af Ajt It is possible to equip the machine with an additional superfine finishing device SUPFINA, or with a grooving unit for rubber or plastic rollers.

Gamybos metai: 1983, būklė: paruoštas naudoti (naudotas), Used for reworking profile rolls for a hot rolling mill, regularly maintained, with accessories, without spare parts, on-site inspection possible, no videos available. Rjdpfxsriwfio Af Ajt