Dėžutė su krovimo dėžute

Schäfer 9000 St. SSI Schäfer Kunststoffkiste EF4

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Codefxyhfspfx Aahegp Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Cgjdpegpxc Sofx Aahjp Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Csdpfsfv Awajx Aahjgp Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and reduced air consumption

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Cgodpfx Aevprv Roahjp Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Cedpfob U Hwnsx Aahogp Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg Cedpfx Aaou Aq Amohsgp

Būklė: labai geros būklės (naudotas), Dual-head projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-acting cylinders with approach stroke Mounted control cabinet according to VDE 0100 Main switch 4-position switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Cylinders can be operated in cascade or simultaneous mode Weight: 1090 kg Machine is currently being refurbished Cgsdpfsd Ip Alex Aahop

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection Cgedpfx Astycdkoahjp - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement

Gamybos metai: 1982, būklė: naudotas, Pressure: 150 t Throat depth: 350 mm Stroke: 20–120 mm Strokes per minute: 40–60 spm Ram adjustment: 85 mm Table size: 1050 x 690 mm Ram surface: 650 x 320 mm Cjdpfx Ajlp U Iwoahjgp Pass-through opening in table: 325 x 200 mm Table height: 850 mm Ram bore (diameter): 50 mm Machine weight approx. 8.6 t Space requirement approx. 2500 x 2500 x 2900 mm Manual central grease lubrication Pneumatic clutch-brake combination Mechanical rupture disc in ram Two-hand operation Foot pedal operation

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 185078, Offer 24435 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 15 GL - Drilling capacity up to: 18 mm - Thread cutting capacity up to: M10 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320, 560, 1000, 1600 rpm Cgjdeut Uzaepfx Aahsp - Motorized stroke of the drilling unit - Table clamping X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power supply: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg - Various guide bushings