Krano sunkvežimis

Scania R 730 LB8x2 V8 FASSI F1650 RA.2.28 XHE- DYNAMIC...

Gamybos metai: 2009, būklė: geras (naudotas), Lifting capacity: 30 t Precision lift Cpjdsqiz N Repfx Aahow Lifting height: 9 meters

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Csdpfx Aasfg E Hlohjpw Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice Cjdjd Iipmspfx Aahspw - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Būklė: labai geros būklės (naudotas), rida: 295 000 km, galia: 405 kW (550,65 AG), pirmoji registracija: 10/2015, kuro tipas: dyzelinas, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2015, veikimo valandos: 1 828 h, Įranga: elektriškai reguliuojamas veidrodis, oro kondicionavimas, priekabos jungtis,

Būklė: naudotas, Velenų skaičius: 10 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Pavaros variklis: 5,5 kW Pavaros greitis: 6-36 m/min. Weinig Unimat 23EL obliavimo ir profiliavimo automatas – skirta medienos keturpusiam obliavimui ir profiliavimui, su mobiliu velenu automatiniam reguliavimui ir griovelio stalu trumpiems bei lenktiems ruošiniams, taip pat su ilgu tiesinimo stalu. Velenas 1: apačioje / 5,5 kW / 40 mm Velenas 2: dešinėje / 11 kW / 40 mm Velenas 3: kairėje / variklis bendras su 2-uoju velenu / 40 mm Cjdow H Iv Topfx Aahopw Velenas 4: dešinėje / 11 kW / 40 mm Velenas 5: kairėje / 5,5 kW / 40 mm Velenas 6: viršuje / 11 kW / 40 mm Velenas 7: apačioje / 11 kW / 40 mm Velenas 8: viršuje / 7,5 kW / 40 mm Velenas 9: apačioje / 7,5 kW / 40 mm Velenas 10: universalus / 4 kW / 40 mm

Būklė: geras (naudotas), Gamybos metai: 2002, veikimo valandos: 5 900 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 74343, darbinis plotis: 1 350 mm, šlifavimo juostos ilgis: 2 620 mm, šlifavimo juostos plotis: 1 370 mm, Plataus juostos šlifavimo staklės Bütfering Optimat SBC 313 Codpfxoqvl D Hs Aahepw Pagaminimo metai: 2002 Modelis: Optimat SBC 313/QCE/Classic - Su 3 agregatais (aprašymas pateiktas nuotraukoje) - Šlifavimas iš viršaus Darbinis plotis: 1350 mm Šlifavimo juostos plotis: 1370 mm Šlifavimo juostos ilgis: 2620 mm Skersinės juostos plotis: 150 mm Skersinės juostos ilgis: 4700 mm Daugiau informacijos nuotraukose.

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced, CNC-controlled notching and cutting system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location via a pull-type clamp measuring carriage on the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The finished cut or notched components either fall into a collection tray or are pushed out of the system by the measuring arm. Thermal cutting units: The Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting with oxy-fuel and/or plasma. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD is used, suitable for material thicknesses up to 32 mm. Thicker materials or bevel cuts exceeding 32 mm are processed using the oxy-fuel cutting unit. Transport system: On the infeed side, ahead of the Ficep Flex FRC notching system, there is a chain drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported on a sturdy roller conveyor into the machine using a clamp measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a roller conveyor width of 1,300 mm on both the infeed and outfeed sides. For removal of finished components on the outfeed side, there are four chain drag transverse conveyors, each 6,450 mm long, installed after the notching system. Mitrol CNC control and Pegaso Software: The system is operated using a modern CNC control unit from Mitrol. This reliable CNC control is developed by Ficep’s in-house manufacturer Mitrol and includes Pegaso software with remote maintenance capability and a data transfer interface. Torit DCE Filter Unit: The dust extraction filter unit is supplied by Donaldson Torit DCE. Safety: via fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Cedpfstwm Ubjx Aahspw Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade bore min./max.: 70mm/95mm, cutting width: 320mm, cutting height adjustable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Cjdpfx Aaowv Umwjhspw

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11383, įvesties srovės tipas: trifazis, darbo diapazonas: 3 000 mm, bendras svoris: 17 000 kg, įėjimo įtampa: 400 V, pjovimo greitis: 2 000 mm/min, bendras plotis: 4 500 mm, bendras aukštis: 5 500 mm, bendras ilgis: 22 400 mm, vėžės plotis: 1 400 mm, kartojimo tikslumas: 1 mm, ruošinio svoris (maks.): 30 000 kg, garantijos trukmė: 6 mėnesiai, įėjimo dažnis: 50 Hz, atviros grandinės įtampa: 400 V, aplinkos temperatūra (maks.): 45 °C, Gebrauchte SPC3000 - HGG Profiling Equipment B.V. Sind Sie bereit, Ihren Workflow zu automatisieren, möchten aber keine große Investition in Rohrschneidmaschinen tätigen? Dann haben wir ein interessantes Angebot für Sie: Diese Rohrschneidmaschine SPC3000 (Baujahr 2014, 40 Tonnen) ist äußerst vielseitig einsetzbar. Die Maschine kann Rohre mit einem Durchmesser von 300 mm bis 3.000 mm schneiden und verfügt über zahlreiche Zusatzfunktionen: • 4x 10-Tonnen-Rohrfahrwerke (300–2.500 mm Außendurchmesser), davon eines angetrieben • 2x 20-Tonnen-Rohrauflagen (2.500–3.000 mm Außendurchmesser) • Plasma-Markiersystem Kjellberg Finemarker • Stempelmarkierungssystem • Geeignet für 18 Meter lange Rohre • Plasma-Schneidsystem Kjellberg FF450 • Autogen-Schneidverfahren • Zusätzliches Touchscreen-Fernbedienpult am Hauptantrieb Cpodpsri Slmefx Aahew • 3-Punkt-Absauganlage für Rauchgas Die SPC3000 wird in unserem eXperience Center eingesetzt und von unseren besten Technikern am Hauptsitz in den Niederlanden gewartet. Die Maschine hat sich bewährt und wird zum Profilieren von Rohren für Kunden aus anspruchsvollen Branchen wie Offshore, Rohrleitungsbau, Stahlbau und dem Schiffbau eingesetzt. Zahlreiche Spezialprojekte wurden bereits auf dieser Maschine realisiert.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, For Sale. Ficep Tipo G25LG. A complete description is attached as a document. Codsu Dw I Espfx Aahopw Year of manufacture: 2019 This line features the following infeed and outfeed lengths: Infeed: 8m Outfeed: 8m If you require additional photos or further information, please feel free to contact us.