Ruloninė konteinerinė savivartis

SCANIA R 480 Abrollkipper * 6x4 * Top Zustand !

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Kfjdexddvnopfx Abksa Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Gamybos metai: 1991, Sąlyga: beveik kaip naujas (naudotas), bendras svoris: 1 420 kg, sukimosi greitis (maks.): 1 485 aps./min, 3 pieces stainless steel volute casing pump in process design 2 x CPK-CM 250-315 Year of manufacture: 1991 1 x CPKN-C1 250-315 Year of manufacture: 2011 Kedpfx Absqabiasksfa !!! Price per unit !!! Pumps were operated on a test bench and all have very few operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Head / Discharge pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with barrier water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearings Lubrication: oil Oil level monitoring: oil level regulator Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing support lantern: cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power P2: 75 kW Thermal class: F Motor protection rating: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Sąlyga: geras (naudotas), Strapping machine, packaging machine, strapping tool, carton stapler, stapling pliers, plier stapler, tensioning and sealing tool Kjdpfxsi I Hdgj Abkofa - Tensioning pliers: Sealing tool for strapping bands - Band width: approx. 16 mm - Staples: approx. 19 mm width, see photo - Dimensions: 480/100/H170 mm - Total weight: 3.6 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2201925, bendras svoris: 2 263 kg, kuro tipas: dyzelinas, bakelio talpa: 600 l, spalva: raudona, galia: 112 kW (152,28 AG), išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 112 kW (152,28 AG), nominali (akivaizdi) galia: 150 kVA, nuolatinė galia: 112 kW (152,28 AG), nepertraukiama (akivaizdi) galia: 150 kVA, bendras ilgis: 3 300 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 970 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: FPT/Iveco, aušinimo tipas: vanduo, kombinuota degalų sąnauda: 32,5 l/100 km, kuro sąnaudos (mieste): 16,17 l/100 km, kuro sąnaudos (užmiestyje): 22,77 l/100 km, kuras: dyzelinas, kuro bako talpa: 600 l, baterijos talpa: 100 Ah, akumuliatoriaus įtampa: 12 V, įėjimo įtampa: 12 V, įėjimo dažnis: 50 Hz, įėjimo srovė: 32 A, darbinė temperatūra: 25 °C, aplinkos temperatūra (min.): −25 °C, aplinkos temperatūra (maks.): 45 °C, valdymo spintos aukštis: 1 970 mm, valdymo spintos ilgis: 3 330 mm, valdymo spintos plotis: 1 200 mm, apsaugos tipas (IP kodas): IP65, sukimosi greitis (min.): 1 500 aps./min, temperatūra: 25 °C, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, mobilioji dyzelino kuro talpa, The Bredenoord 140 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements across various environments. This genset is ideal for mobile use and meets Stage V emission standards. The efficient FPT/Iveco engine, in combination with a Stamford alternator, delivers outstanding performance and low operating costs. The generator is housed in a soundproof enclosure that ensures minimal noise emissions—making it suitable for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external socket outlets with circuit breakers for enhanced safety. With a 600-litre fuel tank, the generator provides up to 18 hours of autonomy under continuous operation. The system operates on diesel, HVO, or GTL fuels, offering flexible fuel options. Technical Specifications: - Model: Bredenoord 140 KVA - Rated power: 150 KVA - Max. power: 150 KVA - Engine: FPT/Iveco NEF67TM3A - Alternator: Stamford brushless alternator (AVR) - Output: 150 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 meters - Fuel tank: 600 litres - Autonomy: - 100% PRP: 18 hours - 70% PRP: 26 hours - Engine power: 112 kW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2263 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 32.5 L/h - 70% PRP: 22.77 L/h - 50% PRP: 16.17 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel tap - XXL fuel tank Sound Attenuation: The generator is engineered with optimized air inlets and special insulation materials to minimize noise. The sound insulation is reinforced with wool of varying thicknesses to reduce noise over a wide frequency range, making it ideal for use in noise-sensitive areas. Durability: The canopy is corrosion-resistant thanks to a coating tested for over 2,000 hours (C5I-H), ensuring long service life even in the most challenging conditions. Ksdpewfgd Hjfx Abksfa Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree chamfer to prevent water accumulation and minimize oxidation. Transport and Mobility: The generator is easily movable due to reinforced lifting eyes and steel beams, making transport on construction sites straightforward. The design ensures stable and secure movement of the generator without risk of damage. Customer-Specific Customization: The Bredenoord 140 KVA generator is available in various versions, from 20 KVA up to 600 KVA. Customer-specific modifications are possible, allowing the generator to be tailored to particular requirements and applications. Certifications: - CE-certified - European manufacturing Applications: This generator is suitable for multiple sectors, including construction, industry, and any other application that requires reliable and efficient power supply.

Sąlyga: geras (naudotas), Friedrich Deckel FP 2 LB Tool Milling Machine Kfedsgyw S Tjpfx Abkoa Accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is distinguished by its extremely rigid base and is designed as a travelling column machine. This means the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree slant bed. Once the universal table is removed, this design allows for direct clamping and machining of V-type engine blocks with a 90-degree cylinder angle, such as American V8 engines. Additionally, the long travel distance of 800 mm is advantageous for this application. Technical Data: Deckel Universal Milling Machine FP 2 LB Digital readout: 3-axis Heidenhain digital display X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Tool holder: SK 40 draw thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of speeds: 18 Table type: Universal swivelling/tilting table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vice: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 Further new and used items can be found in our shop! International shipping costs on request!

Sąlyga: naudotas, rida: 600 000 km, Gamybos metai: 1997, Serial number: YS2R6X2000122xxxx Please contact ATS Norway for further information. Kfedpfx Abowvy Itoksa Please quote reference number upon request: 20740 Specifications: - Not EU-approved - Km: approx. 600,000, printer has been replaced - Manual gearbox - Steel suspension at the front and air suspension at the rear - Tires (see pictures) - 20T hook with joint - Multi-lift on construction site - Trailer hitch - Bed - Available immediately Notes: - Drivable on flat surfaces, does not pull uphill as it should - How are costs calculated here? Km: 600,000 TÜV: No EU-approved until: 10.06.2022 Unladen weight: 11,500 Total weight: 29,000 Payload: 17,425 Width: 250 Length: 820 Euro: 2 Transmission: Manual

Sąlyga: naudotas, rida: 663 035 km, galia: 368 kW (500,34 AG), pirmoji registracija: 02/2012, bendras svoris: 26 000 kg, kuras: dyzelinas, Gamybos metai: 2012,

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 470 kg, kuro tipas: dyzelinas, bakelio talpa: 230 l, spalva: smėlio spalvos, galia: 27,21 kW (37,00 AG), išėjimo srovė: 47 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 17 kW (23,11 AG), nominali (akivaizdi) galia: 22 kVA, nuolatinė galia: 20 kW (27,19 AG), nepertraukiama (akivaizdi) galia: 20 kVA, bendras ilgis: 2 800 mm, bendras plotis: 1 063 mm, bendras aukštis: 1 703 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Cummins, aušinimo tipas: vanduo, AVS Diesel Generator Set DW 20 CU 15 AK14A PRP Power Output: 16 kW / 20 kVA ESP Power Output: 17.6 kW / 22 kVA Engine: Cummins 4B3.9G11 Emission Stage: – Speed: 1,500 rpm Mechanical Governor Operating Voltage: 12 V Cooling: Water-cooled Alternator: Stamford PI114D Voltage: 400/231 V Control Panel: InteliLite AMF Type: Enclosed Genset; weatherproof, sound-insulated • Emergency stop button • Radiator with mechanical fan • Base frame construction with integrated fuel tank (230 L) and forklift pockets • Voltage and frequency control in accordance with ISO 8528-5 • Generator set suitable for stationary use only Please note that under current EU regulations, these generator sets are not approved for mobile applications. The generator sets are sold as B-stock goods. B-stock means the sets may have cosmetic imperfections, such as spot rust or rust on the enclosure. However, these defects do not affect the functionality or performance of the sets in any way. By accepting this offer, you expressly acknowledge the described characteristics of the generator sets and their associated condition. Kfodpjwu D Unsfx Abkoa

Sąlyga: paruoštas naudoti (naudotas), Rūšiavimo mašina Nordberg Bergeaud 18/45-2,5 Gamintojas: Nordberg Bergeaud Tipas: CVB 1845 Darbinis paviršius: ilgis 4500 mm, plotis 1800 mm – 2,5 denio Pavara: 15 kW elektros variklis Ksdpfel Dgnqjx Abkofa Komplektacijoje: spyruoklės.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 5 915 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 4 630 mm, laisvas kėlimas: 1 430 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 350 mm, pavaros tipas: Elektro, Elektrinis 4 ratų krautuvas ISO klasė: ISO klasė 3 = 2 500 - 4 999 kg Kodjv Efghopfx Abksfa Stiebo tipas: Triplex Pavarų dėžė: Automatinė Techninė būklė: labai gera Priekinės padangos tipas: superelastinės Priekinės padangos būklė: 60 - 80% Galinės padangos tipas: superelastinės Galinės padangos būklė: 80 - 100% Baterijos įtampa: 80V Baterijos talpa: 930Ah Baterijos gamybos metai: 2021 Aprašymas: Kaina nurodyta su nauja UVV apžiūra (montuojame originalias Still dalis), Kontrsvorio naujas dažymas, baterija 2021 m. – atnaujinama ir tikrinama, Kappa testas 90 %, tinkamas įkroviklis su jungtimi. Pagal pageidavimą galime pasirūpinti pigiu transportu. Galima lizingo nuoma! Šoninis poslinkis, šakių reguliavimo prietaisas, 3-iasis vožtuvas, 4-asis vožtuvas, galinis darbo žibintas, priekinis darbo žibintas, šildytuvas, uždara kabina, visiškai laisvas pakėlimas, CE sertifikatas, daugiavairis valdymas