Magnetinė plokštelė

SAV SAV Sinus-Magnettisch 400x200mm

Gamybos metai: 2007, būklė: visiškai atnaujintas (naudotas), GF AgieCharmilles Progress V3 Year of manufacture: 2007 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Hsdpommfwusfx Ab Sjni Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading in case of wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handheld control for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and completely overhauled after receiving your order. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Gamybos metai: 2001, būklė: naudotas, Techninės detalės: Hodpfx Aeikbtneb Soni x eiga: 400 mm y eiga: 300 mm z eiga: 500 mm Stalo tvirtinimo paviršius: 400 x 300 mm Stalo apkrova: 50 kg Valdymas – pusiau automatinis: LASERSOFT 3D Lazerio galia: 100 W Bendras energijos poreikis: 27 kVA Staklių svoris apytiksliai: 2,5 t Užimama erdvė apytiksliai: 3 x 3,5 x 2,8 m CNC graviravimo/ženklinimo/kontūro lazerinė staklė Apytiksliai 9 000 įjungimo valandų, apie 5 500 darbo valandų

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Grinding area: 2000x900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle center: 845 mm, magnetic chuck dimensions: 2000x800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500x100x203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. An on-site inspection is possible. Hedpfx Asuyk N Ieb Seni

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Hnedetrgndjpfx Ab Ssi

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Travel range X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Hsdpfx Asv Uqb Nsb Sjni

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools Hedeuxft Eopfx Ab Ssni -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Hnjdpfxsttxg Se Ab Ssi Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Space requirements approx.: 4.7 x 3.65 x 3.0 m

Būklė: beveik kaip naujas (parodų įrenginys), Alle auf dem Bild gezeigten Teile werden mit der Maschine geliefert. Hnjdpfegrafksx Ab Sei

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlome naudotus įvairius 3R sistemos komponentus. Sistemos yra labai geros būklės ir visiškai funkcionalios. Apžiūra galima pagal susitarimą. Poz. 1: System 3R-203 – WEDM sukimo elementas, 360°. Poz. 2: System 3R-201J – WEDM adapteris, 90°. Poz. 3: System 3R-201J – WEDM adapteris, 90°. Poz. 4: System 3R-201J – WEDM adapteris, 90°. Poz. 5: System 3R-202 – MiniBlock. Poz. 6: System 3R-202 – MiniBlock. Poz. 7+8: System 3R-204 – WEDM aukščio reguliavimo adapteris. Poz. 9: System 3R-218/30S – laikiklių rinkiniai. Poz. 11: System 3R-602.21 – rankinis Macro spaustukas. Poz. 12: System 3R-294.3 – spaustuvai. Poz. 14: System 3R-292.3 – SuperVice. Poz. 15: System 3R-293.3 – SuperVice. Poz. 16: System 3R-292.06 HP – SuperVice Magnum. Poz. 17: System 3R-200-4J-2, 470 mm; System 3R-200-4J-2, 470 mm; System 3R-200-4J-2, 330 mm; System 3R-200-4J-2, 138 mm. Poz. 18: System 3R-239–545 0006-V01; System 3R-239–495. Siuntimas ir apžiūra galimi! Hedpfxexqn Ubj Ab Seni

Būklė: naudotas, Gamybos metai: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control system: FANUC Total power requirement: 12 kW Machine weight approx. 2300 kg Space requirement approx. m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 _____ Working area: Longitudinal stroke X-axis: 500 mm Vertical stroke Z-axis: 300 mm Cross stroke Y-axis: 380 mm Table size / working surface: 650 x 380 mm Table load capacity approx.: 200 kg Clearance between table/spindle: 240-540 mm Reach to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling performance in steel: 20 mm / 130 cm³ Milling in aluminium: 500 cm³ AC main drive approx.: 3.7 / 5.5 kW Total installed power approx.: 12 kW – 380 V – 50 Hz Weight approx.: 2,300 kg Accessories / special equipment: • Original FANUC control with display and all modern sub-programs, error diagnostics, electronic handwheel, RS232, simple and quick programming directly at the machine, among others • Vertical turret head with 10 tool stations ISO 40, fast tool change time approx. 7 seconds chip-to-chip • Motorized rotary table mounted on the machine table (not a CNC axis), ideal as an indexing table, hydraulic, Type RST 2 • Separate coolant system • Various toolholders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminium Condition: good to very good – demonstration available under power Delivery: immediately from stock, loaded free onto truck Payment: strictly net – upon receipt of invoice We look forward to your order. We always have a large selection of CNC machining centers of all types in stock – please ask for alternatives! Hnodjt Hw H Ejpfx Ab Ssi