Trijų krypčių savivartė priekaba
Saris K3 356 184 3500 Tandem 3-Seiten Kipper

Name: Saris K3 356 184 3500 Tandem 3-Seiten Kipper
Brand: Saris
Price: 5499 EUR
Availability: InStock

Fiksuota kaina plius PVM

5 499 €

Gamybos metai

2026

Būklė

Naujas (visiškai funkcionalus)

Vieta

Gera

Trijų krypčių savivartė priekaba Saris K3 356 184 3500 Tandem 3-Seiten Kipper

Saris K3 356 184 3500 Tandem 3-Seiten Kipper

Duomenys apie mašiną

Mašinos pavadinimas:: Trijų krypčių savivartė priekaba

Gamintojas:: Saris

modelis:: K3 356 184 3500 Tandem 3-Seiten Kipper

Mašinos numeris:: NEW-25

Gamybos metai:: 2026

Būklė:: naujas

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Fiksuota kaina plius PVM

5 499 €

Vieta:: Thränitz 13, 07554 Gera, Deutschland

Skambinti

Techniniai duomenys

Tuščias svoris:: 886 kg

Didžiausias leistinas svoris:: 2 614 kg

Bendras svoris:: 3 500 kg

Ašių konfigūracija:: 2 ašys

Krovimo vietos ilgis:: 3 560 mm

Krovinių skyriaus plotis:: 1 840 mm

Krovos erdvės aukštis:: 350 mm

Pakaba:: kitas

Padangos dydis:: 195 / 50 R 13

Maksimalus greitis:: 100 km/h

Spalva:: sidabras

Priekabos stabdys:: priekaba su stabdžiais

Stabdžiai:: kitas

Pasiūlymo informacija

Skelbimo ID:: A5451807

Nuorodos numeris:: 19918993

Atnaujinimas:: paskutinį kartą atnaujinta 12.03.2026

aprašymas

SARIS K3 356 184 3500 2E Three-sided tipper
NEW VEHICLE

Internal dimensions: 356cm x 184cm
Side wall height: 35cm
Loading platform height: 75cm
Total weight: 3500kg
Payload: 2614kg

Braked tandem axle trailer
Overrun brake and parking brake from AL-KO
Largest possible axle and brake
Low chassis
Fully welded, hot-dip galvanized steel frame
35cm aluminum profile side walls with tensioning latch
Can be folded down and removed on all sides
15mm thick, non-slip and robust screen-printed plywood floor
Additional steel plate on the plywood floor
Automatic jockey wheel with 400kg support load
8 noise-reducing lashing eyes with 800kg pulling force
Reinforced 13" C tires with steel valve
M+S tires
Net/rope hook on the frame
13-pin connector
LED outline lights at the front
Rear lights with reversing light and triangular reflectors
Upper frame mounted on rubber
Large tipping angle of 41 degrees backwards
Lateral tilting by repositioning the safety pins
Electric tipping operation with plug for charging the 12V battery
Electric limitation of the tipping angle to the side
U-rail for attaching the original SARIS loading ramp

OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026

-Equipment for 100km/h (shock absorbers)
-Spare wheel with holder
-Without side walls (price reduction)
-Black Edition (Powder-coated side walls and rims in black)
-Integrated loading ramps 2800kg
-Extended tipping angle to 52 degrees (5-stage cylinder)
-Charger
-Remote control
-Bluetooth remote control
-Emergency hand pump in combination with electric operation
Rsdpsghpa Ujfx Ahmscf
-Safety support for maintenance work on a tilted vehicle
-Folding crank rear supports
-Complete LED lighting
-Theft protection
-Net, fine or coarse mesh
-H-frame
-Leaf grid in various heights, also closed
-Extension side walls 30cm with tensioning latch
-Flat cover with or without rail
-High cover 180cm or 200cm

Further accessories available upon request!

Plus freight to Gera and vehicle registration document €250 net

Images are for illustrative purposes only and may show optional accessories that incur additional costs.

Have you not yet found the right trailer?
We have 50-100 vehicles permanently and immediately available in stock.

The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs.

Specialist in axle repair, also for caravans.

In addition, we have a large selection of spare parts and accessories, including for trailers from various manufacturers.

You can find a wide selection of rental trailers with us.

Visit us online or come by directly!

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2006

85 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 365 8... skelbimai

+49 365 7... skelbimai

Faksas:

įsiminti

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Karšto oro krosnelė Compactsystem MARTINA 55

Leipzig

875 km

Karšto oro krosnelė
CompactsystemMARTINA 55

4 300 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm Rjdpfxevz Hq He Ahmjcf - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Peržiūrėti detales

Mažas skelbimas

Savivartė priekaba Cheval Liberté DEBON PW3.6 CHEVAL LIBERTE 3500kg 360x180x35cm Dreiseitenkipper

Stuhr

1 016 km

Savivartė priekaba
Cheval LibertéDEBON PW3.6 CHEVAL LIBERTE 3500kg 360x180x35cm Dreiseitenkipper

Skambinti

Mažas skelbimas

Savivartis Cheval Liberté Rückwärtskipper CHEVAL LIBERTE PW1.2LUX

Stuhr

1 016 km

Savivartis
Cheval LibertéRückwärtskipper CHEVAL LIBERTE PW1.2LUX

3 276 €

Fiksuota kaina plius PVM

Skambinti

Mažas skelbimas

Įvorės ir laikikliai DANGTAS ISO 40 DECKEL Aufnahmen FP1-FP2-FP3-FP4

Iserlohn

1 160 km

Įvorės ir laikikliai DANGTAS ISO 40
DECKELAufnahmen FP1-FP2-FP3-FP4

2 750 €

VB plius PVM

Skambinti

Mažas skelbimas

Vertikalios frezavimo staklės WMW HECKERT FSS 315/E

Sonneberg

1 008 km

Vertikalios frezavimo staklės
WMW HECKERTFSS 315/E

3 800 €

Fiksuota kaina plius PVM

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1983, Machine Number: 316204/22 Type / Model: FSS 315/E Travel distances x-y-z: 850 – 280 – 355 mm Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Spindle taper: SK 50 Rcodofli Afspfx Ahmef Quill stroke: 80 mm Feed x and y axis: 16 to 800 mm/min Feed z axis: 5 to 250 mm/min Connection: 8 kW Accessories/Equipment: Swiveling head Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Peržiūrėti detales

Mažas skelbimas

Švytuoklinė lenkimo staklės (Schwenkbiegemaschine) lankstymo suolas 2 m Prod-Masz Abkantbank Biegemaschine RED PLUS 2200/0.8 +Fußpedal + Aussparung

Hildesheim

976 km

Švytuoklinė lenkimo staklės (Schwenkbiegemaschine) lankstymo suolas 2 m
Prod-Masz Abkantbank BiegemaschineRED PLUS 2200/0.8 +Fußpedal + Aussparung

2 600 €

Fiksuota kaina PVM negalimas išskirti

Skambinti

Būklė: naujas, Gamybos metai: 2026, New machines directly from a proven and experienced manufacturer. Risk-free! The high build quality and attention to detail in every component ensure reliable and long-lasting use of this modern folding and bending machine. The integration of a foot pedal further expands its range of applications. This allows bending operations at any tool position without the need to constantly reach for the clamping lever at the right side of the machine. This increases both the accuracy and speed when positioning the workpiece at the bending edge. Rjdoc Nxwhepfx Ahmscf With this foot-operated folding machine, you can bend sheet metal from three sides. The machine design features a 6 cm up-and-down clearance for forming operations. Folding Bench RED PLUS 2200/0.8 incl. foot operation and transport rollers Technical data: - Maximum working width: 2,200 mm - Bending capacity: up to 0.8 mm (mild steel) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Cutting with rotary shear across the entire working width - Upper beam thickness: 15 mm - Upper beam lifts in three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop up to 90 degrees - Rear frame for sheet holding - Front depth stops - Weight: approx. 230 kg Rotary shear (max. cutting capacity 0.8 mm / steel) available for an additional 350 euros The machine complies with CE guidelines and comes with a 12-month warranty. Delivery to Germany: 180 euros Delivery time: 2-4 days Cash on delivery possible We look forward to hearing from you!

Peržiūrėti detales

Mažas skelbimas

Vienpusė poliravimo mašina su Direktantr Weiz Industrie- und Robotertechnik RPM- DU 400 RE

Vokietija

1 153 km

Vienpusė poliravimo mašina su Direktantr
Weiz Industrie- und RobotertechnikRPM- DU 400 RE

Skambinti

Gamybos metai: 2016, būklė: naujas, The single-sided polishing machine is designed for both manual and robotic processing, suitable for polishing components made of aluminum, steel, brass, and zinc die-cast. Technical Data: Polishing wheel: max. Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max. 50 mm Extraction port: Ø 100 mm Dimensions (LxWxH): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Power rating: 4 kW Rcedpfoc Rfg Uox Ahmef Height to polishing spindle available on request Made in Germany Warranty: 12 months Optional: An upgrade with a frequency inverter costs 950 euros per polishing machine. Includes: 1 frequency inverter, 1 potentiometer for adjustment, 1 main switch.

Peržiūrėti detales

Mažas skelbimas

Marxen

924 km

Žemės ūkio mašina
6140R DD 40

74 000 €

Fiksuota kaina plius PVM

Skambinti

Mažas skelbimas

Suvirinimo stalo priedai WMT Schraubzwingen 10

Velen

1 176 km

Suvirinimo stalo priedai
WMTSchraubzwingen 10

Skambinti

Mažas skelbimas

Hidraulinis vise Arno Kesel Spannweite 205 mm

Wiefelstede

1 046 km

Hidraulinis vise
Arno KeselSpannweite 205 mm

450 €

Fiksuota kaina plius PVM

Skambinti

Būklė: naudotas, Hydraulic vise, machine vise, hydraulic clamping vise, high-pressure clamp, hydraulic vise, NC power clamp, NC power clamping vise -Handover: as-is, in the condition as inspected -Spindle bent: vise does not open -Machine vise: with rotary base -Jaw width: 200 mm -Jaw height: 60 mm Rodpfx Aeg Td E Sshmscf -Clamping range: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Peržiūrėti detales

Reklamuokite čia