Darbo stalas

SANDERS ANTHRAZITGRAU RAL 7016

Būklė: naujas, Ilgis 2000 mm Plotis 700 mm Darbinis aukštis 900 mm Reikalinga erdvė apie 2,0 x 0,7 x 0,9 m Svoris 130 kg Rjdpjzafm Uefx Aa Dscd Darbo stalas – pagaminta Vokietijoje Pramoninė kokybė, ypač tvirta ir ilgaamžė konstrukcija didžiausiems reikalavimams! Darbo stalo plokštė – 45 mm storio, aukštos kokybės daugiasluoksnė buko fanera

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Rodouiy Hrepfx Aa Dscd Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Būklė: geras (naudotas), Gamybos metai: 2011, maks. bendrasis leistinas svoris 12 500 kg maks. laikiklio apkrova 350 kg Rcsdszcmd Tspfx Aa Ded

Būklė: naujas, Ilgis 1700 mm Rcedpfx Aaextfy To Dod Plotis 600 mm Aukštis virš grindų 860 mm Stalo apkrova 400 kg Matmenys (I x P x A): 1700 x 600 x 400 mm Svoris 70 kg Darbo stalas su 6 stalčiais ir masyvo medienos darbiniu paviršiumi Durų skyriaus matmenys (P x G x A): 940 x 400 x 440 mm Mažo stalčiaus matmenys (P x G x A): 460 x 400 x 120 mm Aukščio reguliavimas maks. 40 mm

Būklė: naujas, Dimensions (L x W) 1400 x 1750 mm Weight, kg Tiltable yes/no: yes RUCHSER Assembly Tilting Table RU-MKS 1.4 ----- Universally applicable work table, e.g. for frame assembly, roller shutter box assembly, glazing bar installation, sash fitting, glazing Equipment, alternative/optional features available on request! Pos. 1.0: Item No.: 8820000 RU-MKS-1.4 Assembly Tilting Table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one fixed to the upper extension, covered with felt. Support surface with width and height/depth extension. Pneumatic tilting function, load capacity 130 kg. Activation via foot pedal. Roller conveyor manually foldable and extendable sideways from 1400-2500 mm, roller length 140 mm (closed). Conveyor height in vertical table position adjustable from 300-380 mm, working height horizontal adjustable from 920-970 mm. !For safety reasons, at least one flat clamping cylinder must be ordered! Pos. 1.1: Item No.: 5582 Pneumatic swivel device for the roller conveyor for MKS Pos. 1.2: Item No.: 21127 Support bar 1400 mm, non-extendable for RU-MKS Pos. 1.3: Item No.: 5585 360° rotating device with pneumatic locking at 180° increments Rotation brake operable from both sides When using the rotating device, the minimum roller conveyor height of the MKS table increases to 330 mm Pos. 1.4: Item No.: 6455-01 6 storage bins with 2 compartments each, mountable on pivots; for RU-MKS Pos. 1.5: Item No.: 5597-10 Travel gear for semi-circular guide rails for RU-MKS-P4 Operation via foot pedal, mounted on roller conveyor side. Pos. 1.6: Item No.: 6354-6 3 double-meter semi-circular guide rails 30 x 10 mm. Pos. 1.7: Item No.: 5193-1 Flat clamping cylinder with hand valve, clamping range 130 mm, retractable mounted on support bar, felt-lined at contact surface, installation left or right, please specify. Rsdpfx Asx H Al Aoa Dscd Pos. 1.8: Item No.: 5584 Lifting device 450 mm for working on vertically standing elements. Activated via foot pedal. Maximum load capacity 200 kg for RU-MKS...-1.4 and 140 kg for RU-MKS...-2. Pos. 99.1 Packaging on pallet ----- Total price in this configuration: on request! Video and PDF brochure attached. (Technical data as specified by manufacturer - subject to change or error!)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Complete overhaul 2025 Saw blade: 350 - 400 mm Rsdpfx Aajxpqzhs Docd Motor power: 6.5 / 8.5 kW Speed: 1500/3000 rpm Cutting speed: 1650 – 3800 m/min Saw blade height adjustment: electronic Working area, square max.: 120x120 mm Working area, flat max.: 200x100 mm Working area, flat max.: 250x70 mm (extra-wide only) Working area, round max.: 130 mm Saw feed: 0 – 40 mm/s, infinitely variable Cut-off length: 5–600 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight approx. 1300 kg Dimensions (LxWxH): 1800mm x 1300mm x 1950mm The machine will be completely overhauled in our facility and will then be in as-new condition. Among other things, the following components will be renewed: - Conversion to PLC control - Upgrade to Siemens HMI operator interface - Conversion to ball screw with servo control - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is additionally equipped with: - Soundproof enclosure - Splitter extension (for superior cut surfaces without drag marks) Optional: - Multi-clamp device for parallel sawing of multiple workpieces - Flat magazine for the automatic feed of raw material up to 6m length - 7.5 kW motor - 12 kW motor - Delivery and installation at your facility - Operator training for your staff

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Year of overhaul: 2024 Max. saw blade size (carbide-tipped): 500/550 mm Saw motor drive power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550 mm): 3,800–5,500 m/min Saw blade feed, infinitely variable: 0–40 mm/s Saw height adjustment, infinitely adjustable, fully electronic Working range, square at 90° max.: 160 x 160 mm Working range, flat at 90° max.: 380 x 60 mm Working range, round at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed (AC servo) max.: 400 mm/s Compressed air connection (on site): 6 bar Weight (saw) approx.: 2,850 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm The machine, following completed retrofit, is in as-new technical and visual condition. Thanks to its configuration and design, the machine can be used efficiently across a wide range of applications. The positioning system ensures simple and highly cost-effective operation. Due to the powerful motor, short cycle times can be achieved even when cutting thick-walled profiles or solid materials. The sound enclosure reduces the resulting noise emissions to a minimum. The machine is thoroughly overhauled in our facility according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of ball screw - Replacement of servo motor and servo drive - Replacement of the frequency inverter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve islands - Overhauled extraction system - Overhauled minimum quantity lubrication system - Replacement of general wear parts - Overhaul of sound enclosure The machine is also equipped with: - Sound enclosure - Mechanical zero point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts for our systems. Labor and wear parts are excluded from the warranty. Options: - Chain magazine for 4/6m materials - Splitter extension (for high-quality cutting surfaces without return marks) - Horizontal clamping of the saw line Rcodpfeuiy Rqjx Aa Ded - Front cut stop in the material feed unit - Reinforced motor 11 kW - Roller conveyors - Delivery and installation at your facility - Training for your employees