žirkliniai kėlimo stalai

Reinhold Beck Maschinenbau GmbH TL 3000 Tandem

2 tables are connected via tandem control for a combined load capacity of 5000 kg.

Technical Description with the Following Main Data:

Load Capacity: 3000 kg static distributed load
Useful Lift: 800 mm
Closed Height: 240 mm
Overall Height: 1040 mm
Platform Length: 1300 mm
Platform Width: 1000 mm
Material: Smooth sheet steel
Lifting Time: approx. 18 sec for full useful lift
Lowering Time: dependent on load
Power Supply: 3 x 400 V / 50 Hz + protective earthing, incl. 16 A CEE plug and 3 m cable
Motor: 2.2 kW, 1,400 rpm
Bsdpfx Alok E Hmtowell
Valve Voltage: 24 V DC
Degree of Protection: IP 54 general, solenoid valve and switch IP 65
Paint Finish: Steel blue, RAL 5011
Power Unit Position: integrated into the lift table
Control Box: Dead-man control incl. 2 m cable
Total Weight: approx. 330 kg

Tandem control for joint operation.
Attention: No guarantee can be given for 100% synchronous operation. Any height differences that may occur are compensated in the home or upper position! The safety contact strips of the two lift tables are NOT interconnected. Minimum distance between lift tables: 500 mm. Maximum distance between lift tables: 3000 mm.

Self-supporting base frame with 4 flange wheels into which the lift table is installed. 4 ball-bearing-mounted flange wheels, wheel Ø150/175 mm, heavy-duty design, machined from C45 steel. Height increase: approx. +50 mm.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.