Smulkinimo įrenginys

Recuperma RECU UZ 2000

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 6 164 h, Doppstadt IDC000123 - gamintojas: Doppstadt - modelis: DZ 750 Kombi - pagaminimo metai: 2009 - bendrasis transporto svoris: 46 000 kg Dcedsvy S Dpopfx Admsr - darbo valandos: 6145

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (naudotas), 2x125 ton gantry crane, 30 meter lifting height, year of manufacture 2014 Dcedpegmdnfsfx Admsr

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 14 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 33 000 kg, galia: 264 kW (358,94 AG), sukimosi greitis (min.): 70 aps./min, įėjimo įtampa: 400 V, Slow-running, robust single-shaft shredder Suitable for the pre-shredding of a wide range of materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or compacted in bales. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: As requested by the customer (mm) Control cabinet: complete (with ABB frequency inverter) Working opening: 2135 x 1750 mm Feed volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Number of rotor blades: 84 pcs Blade dimensions: 172 x 57 x 28 mm Dodpfx Adsv S Hyvemocr Counter knives (bottom): 6 pcs Scraper comb (top): 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H=4880 mm Delivery time: immediately Two discharge conveyors available as an option.

Sąlyga: naudotas, Gamybos metai: 2016, veikimo valandos: 7 847 h, Power: 440 kW (598 hp) Please contact Emal Jaweed for further information. Crawler tractor, Challenger MT875E, year of manufacture: 2016, operating hours: 7,847 h, length: 6,400 mm, width: 2,500 mm, height: 3,500 mm, weight: 23,200 kg, track width: 910 mm, engine: AGCO Power, engine output: 440 kW, closed cabin, air conditioning, number of cylinders: 12, air ride seat, Trimble Precision IQ display, Trimble AG-25 antenna, AdBlue, front rim weights, side frame weights, rear remote controls, additional hydraulics, ISOBUS, compressed air braking system, front idler roller weights, crawler chassis, GPS control, torque: 2,840 Nm. Miscellaneous: Dsdpfxsr Nfaho Admocr * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for print & typing errors. * Subject to errors and prior sale. * Trade-ins possible! * Only the general terms and conditions (GTC) of Jaweed GmbH apply for the purchase of vehicles/used machinery. * Further information and our GTC can be found on our website. We are selling our goods with general terms and conditions (listed: ... / GTC).

Gamybos metai: 1963, Sąlyga: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Dcsdpsh I Edvofx Admsr

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Sujungimo talpa 30-32 m³ sraigtiniams presams, galima dešinėje arba kairėje pusėje. naudotos, veikiančios sujungimo talpos nuo 4000 €, priklausomai nuo būklės, be PVM. Djdpfxegypd Ho Admocr Galimas pristatymas.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps Dcsdpfovf E Avsx Admor - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Sąlyga: geras (naudotas), EINSCHACHTZERKLEINERER WEIMA Dsdstqd Ndopfx Admocr MODELL WLK15 HAUPTMOTOR 90 KW

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 25 h, Funkcionalumas: visiškai funkcionalus, Įranga: sūkių greitis be galo kintamas, Crusher equipment Including special tools, reinforced, 7/7 tool carriers each with 4 tools (tools consisting of primary, pre-crushing, and post-crushing blades) Shaft speed individually and steplessly adjustable, approx. 0-41 rpm Including post-crushing beam Including tilting hopper Drive unit Drive power 294 kW Including Scania diesel engine, Stage 5 Including standard sound insulation package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling radiator Electrics / Control Including IFM display Including remote control Including 4 shredding programs (wood, waste, special, and green cuttings) Discharge conveyor Including discharge conveyor Custom equipment Including pre-armoring of tools Including hydraulic overband magnet, height adjustable – neodymium – Including hopper extension, 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Dcsdju Hgllopfx Admor Including rubber track pads Including pressure sensors Including additional noise reduction cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Complete solution for conveying bulk materials such as shredded material, wood chips, wood pellets, granulate, etc. Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 5,000 mm (customizable) Bend angle: 35°, 40°, or 45° Infeed height: horizontal (customizable) Discharge height: individually adjustable Dsdpfx Aei Igdfedmjcr Design: height-adjustable (movable) Conveyor belt width: 500 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and corrugated sidewall Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive, etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25 mm T-50 cleats – 400 mm pitch 2-ply for exceptional transverse stability Permanently mounted overband magnetic separator: Permanent overband magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200 mm Magnetic area L: 700 mm, W: 250 mm Geared motor: 0.37 kW We always keep various systems of this type in stock. The delivery time for a customized system is currently approx. 2-3 weeks, depending on manufacturing requirements. Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop custom, individualized solutions and supply the associated systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator