Abrazyvas 2 maišai

Rösler RS 40/40 50 kg

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Iedpfx Aon Smbrsfwsa Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Sąlyga: naujas, Gamybos metai: 2018, For sale is an unused Rösler FKS 35 Tandem with acoustic enclosure, manufactured in 2018. The system remains in its original packaging and is available from our warehouse. You are welcome to arrange an on-site inspection appointment by phone in advance. Iodpol D Ex Djfx Afwea

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, bendras svoris: 1 195 kg, tūrio srautas: 7,25 m³/val, darbinis slėgis: 13 juosta, įėjimo įtampa: 400 V, ATLAS COPCO GA 37 VSD ff Screw Compressor Variable speed drive (inverter controlled) Equipped with a refrigerant dryer 37 kW motor Output: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h Isdot Hdh Nepfx Afwoa The compressor is fully operational

Sąlyga: naujas, Load capacity: 15,000 kg Length: 10,000 mm Width: 2,450 mm Height: 625 mm Rear axle: steerable Isdpfx Aefrzvlofwsa Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer equipped with: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. Custom RAL colour available on request. Other load capacities and dimensions available upon request. Please contact us.

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm Iodpfsfqpxijx Afwoa - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, garantijos trukmė: 12 mėnesiai, ruošinio plotis (maks.): 1 300 mm, RWT Deburring Machine – Possible Configuration Four-Station Machine: 1. Deburring with contact roller sanding belt 2. Cup brush for oxide layer or slag removal 3. Cup brush for edge rounding Iedpoudal Defx Afwea 4. Finish grinding with contact roller The BSM series machines can be equipped with the following work units: Sanding unit with sanding belt (R) – removes burrs protruding from the material surface, removes scale and corrosion from the surface Planetary disc brush unit (D) – rounds edges, creates radii, and removes oxide layer on the sides after laser cutting Rotary unit (A) with flap brushes – deburring and edge rounding without removing protective film, surface unification Abrasive fleece brush unit (B) – cleans and polishes the surface material before further processing These deburring machines are used for the following tasks: Deburring parts after laser cutting – deburring edges, removing oxide, and surface finishing Deburring parts after plasma cutting – slag removal, rust removal, removal of material overflows, edge rounding, and surface finishing Deburring parts after punching – removal of sharp edges, edge rounding, and final surface finishing Deburring parts after waterjet cutting – deburring and edge rounding, removing traces from waterjet cutting, and surface finishing Deburring film-coated stainless steel parts – deburring and edge rounding without removing the protective film Main advantages of the machine: Modular system – we design the machine exactly to your needs High-quality and even deburring of all product edges Machining of very small workpieces with magnetic or vacuum table Very simple operation via Schneider Electric touchscreen Grinding, deburring, and finishing with one machine Very fast tool changes and rigid machine frame Given the wide variety of possible machine configurations, we recommend personal consultation and free grinding samples at our facility. This allows us to evaluate our customers’ requirements and then suggest the optimal machine configuration for your specific production needs.

Sąlyga: naujas, Gamybos metai: 2025, The EVP-RA 350 vibratory finishing machine from ERBA features a rising processing bowl floor with integrated parts/media separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the integrated drop-off step. Discharge and separation are performed via the integrated flap (manual or pneumatic actuation). Upon request, the machine can be fitted with reinforced suspension and a higher-performance motor for heavier loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines thanks to its lateral discharge system. The machine is also available with a fully-automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, which is largely attributed to the hot-cast polyurethane lining inside the processing bowl. Technical data: - Gross volume: 385 L - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are available separately at additional cost. Ijdpfx Afsn Ut Urowsa If you are interested, we look forward to hearing from you. We would be pleased to advise you in a non-binding manner. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). Initially, you will receive a non-binding offer, which also includes information on our general terms and conditions, imprint, and cancellation policy, before any purchase or contract is concluded.

Sąlyga: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Capacity: 150,000 litres Diameter: approx. 3,000 mm Isdpfxofnh Tge Afwea Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Sąlyga: geras (naudotas), The listed driven tools VDI 50 are suitable for a SAUTER tool turret and are in good condition, fully functional, and were previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Item no.: XVI 24275 1 drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT. Item no.: XVI 24277 1 drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT. Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Isdpfxsbql S Hj Afwja Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, Drive: SAUTER B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Sąlyga: naujas, Gamybos metai: 2025, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: - Gross volume: 60 L Iedsn Ut Ilepfx Afwoa - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.