Šratavimo mašina

Rösler RRB 11/5

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Rubber Belt Continuous Shot Blasting Machine Manufacturer: Rösler Drum diameter: 400 mm Max. workpiece length: 700/1000 mm Max. single piece weight: 12 kg Loading capacity: 100 kg Blast wheels: 4 units, each 7.5 kW Installed power: 45 kW Warranty: 6-month functional and performance warranty when commissioned by DECK Sarl. Spare parts supply guaranteed for the next 10 years OPTIONAL: Delivery to your facility Supervisor installation / commissioning / training Knjdpfx Aen E Tubsbkof

Sąlyga: naujas, Cutting diameter round: 900 mm Knjdpsfg E Hpsfx Abksf Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naudotas, Gamybos metai: 2015, TAKISAWA TS4000YS metai 2015 CNC valdymas FANUC 32i-MODEL B Maksimalus tekinimo skersmuo 315 [mm] Maksimalus prasisukimas virš lovos 600 [mm] Maksimalus tekinimo ilgis 735 [mm] X ašies eiga 267 [mm] Z ašies eiga 840 [mm] Y ašies eiga -50 [mm] / +70 [mm] A ašies eiga 780 [mm] Spartusis įsibėgėjimas X ašis 30000 [mm/min] Spartusis įsibėgėjimas Z ašis 30000 [mm/min] Spartusis įsibėgėjimas Y ašis 10000 [mm/min] Spartusis įsibėgėjimas A ašis 30000 [mm/min] Pagrindinis špindelis A2-8" Knedewq Sf Tjpfx Abksf Maksimalus strypo skersmuo 82 [mm] Špindelio pervada 94 [mm] Maksimalus špindelio greitis 4200 [aps./min] Špindelio galia 22 [kW] Priešpriešinio špindelio nosele F140 Priešpriešinio špindelio pervada 53 [mm] Maksimalus priešpriešinio špindelio greitis 6000 [aps./min] Priešpriešinio špindelio galia 11 [kW] Maksimali įrankių laikiklio skerspjūvio dalis 25 [mm] Įrankių stočių kiekis 15 Varomų įrankių stočių kiekis 15 Maksimalus varomų įrankių greitis 6000 [aps./min] Tepimo bakelio talpa 370 [l] Bendras reikiamas galingumas 37 [kVA] Tiekimo įtampa 400 [V] Drožlių transporteris su staklėmis 5 varomi įrankių laikikliai Svoris 6700 [kg]

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, veikimo valandos: 2 200 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 196691, X ašies eiga: 5 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: Okuma, valdiklio modelis: OSP-P300, sukimosi greitis (maks.): 6 000 aps./min, galia: 22 kW (29,91 AG),

Sąlyga: geras (naudotas), Gummiband-Strahlanlage mit Muldenband Max. Chargenvolumen: 800 L Max. Chargengewicht: 2.000 kg Max. Werkstückgewicht: 150 kg Trommeldurchmesser: 1.350 mm Trommelbreite: 1.350 mm Anzahl der Turbinen: 2 Leistung je Turbine: 11 kW Max. Turbinendurchsatz: kg/min Reinigungstyp: Luft Fundament: nicht erforderlich Gehäuseschutz: Mn (Manganstahl) Erforderlicher Luftdurchsatz: ja Gesamtbreite der Maschine: mm Knedpslf Hq Njfx Abkof Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm Knsdpfx Aohzbipobkjf - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t Kjdpfx Abof Sqckoksnf 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Ksdpfx Abogf H Saokjnf Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: paruoštas naudoti (naudotas), Voortman VB1250 juostinis pjūklas pjovimo pajėgumas: 1250 x 500 mm įstrižas pjūvis +/- 60°: 1000 x 500 mm įstrižas pjūvis +/- 45°: 850 x 500 mm įstrižas pjūvis -30°: 500 x 500 mm pjovimo greitis: 40–120 m/min galia: 7,5 kW Juostinio pjūklo matmenys: 11.000 x 54 x 1,6 mm Voortman V630 trijų ašių gręžimo modulis 2 horizontalūs gręžimo moduliai 1 vertikalus gręžimo modulis kiekvienas modulis turi automatinį 5 padėčių įrankių keitiklį velenas: SK40 (aušinimas per veleną) gręžimo skersmuo: 8/40 mm gręžimo greitis: 0–2000 aps./min. sriegiklis: M8/M24 Profilio aukščio matavimas įtrauktas Centrų žymėjimas įtrauktas Numerių žymėjimo įrenginys įtrauktas 18 m ilgio įleidimo ritininė transporto linija 6 skersinės transporto juostos po 4 m Maksimalus plotis: 1050 mm apkrova: 400 kg/m maks. pozicionavimo svoris: 9 t Ritininė transportavimo matavimo sistema = neribotas matavimo ilgis Vacon 110 CNC valdymas Hidraulinis blokas 4 kW – 160 barų. Knodpfx Aewlkwwobkof

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1091950, SPEZIFIKATIONEN Verfahrwege X-Achse Verfahrweg: 1626 mm Y-Achse Verfahrweg: 813 mm Z-Achse Verfahrweg: 762 mm Spindelnase bis Tisch (max.): 889 mm Spindelnase bis Tisch (min.): 127 mm Tisch Länge: 1626 mm Breite: 711 mm T-Nutenbreite: 16 mm T-Nutenmittenabstand: 125 mm Anzahl Standard-T-Nuten: 5 Maximale Tischbelastung: 1814 kg Spindel Max. Leistung: 22,4 kW Max. Drehzahl: 7500 U/min Max. Drehmoment: 610 Nm bei 500 U/min Antriebssystem: 2-Gang-Getriebekopf Aufnahme: BT50 Lagerschmierung: Luft/Öl-Injektion Kühlung: Flüssigkeitsgekühlt Vorschub Eilgang X: 13,7 m/min Ksdpfx Ast Dmmvobkjnf Eilgang Y: 15,2 m/min Eilgang Z: 15,2 m/min Max. Arbeitsvorschub: 12,7 m/min Achsantriebe Max. Vorschubkraft X: 24.910 N Max. Vorschubkraft Y: 24.910 N Max. Vorschubkraft Z: 24.910 N Werkzeugwechsler Kapazität: 30 Werkzeuge Max. Werkzeugdurchmesser (mit Nachbarplatz leer): 254 mm Max. Werkzeugdurchmesser (alle Plätze belegt): 102 mm Max. Werkzeuglänge (ab Bezugsfläche): 406 mm Max. Werkzeuggewicht: 13,6 kg Werkzeugwechselzeit (Ø Werkzeug zu Werkzeug): 4,2 s Span-zu-Span-Zeit (Ø): 6,3 s Sonstiges Luftbedarf: 113 l/min, 6,9 bar Maschinengewicht: 10.206 kg MASCHINE AUSGESTATTET MIT: - Kühlmittel durch die Spindel - Späneförderer (Schnecke) - Starres Gewindeschneiden - Festplatte - Beleuchtung - Vollverkapselung