Laikiklis - 3 žandikaulių laikiklis

Röhm SSH 200/3 (Nr. 43)

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Kdedpfx Alsd Nw Ttjdon Main motor power: 15 HP

Būklė: geras (naudotas), Flat dies thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat dies thread rolling machine / knurling machine - Model: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: 3-step adjustable Kdodei Eg Nkepfx Aldjn - Knurling plate: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1,308 kg

Būklė: naudotas, Gamybos metai: 1988, Atstumas tarp centrų: 1200 mm Sukimosi greitis A) 70–380 aps./min. Sukimosi greitis B) 380–2000 aps./min. Kdedsk Sat Djpfx Aldon Svoris: 2,2 t Tekinimo staklės +++++ Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties negalima jos parodyti įjungtos arba padaryti vaizdo įrašo. Mūsų skelbime pateiktos pačios informatyviausios ir geriausios kokybės nuotraukos. Deja, papildomų nuotraukų atsiųsti negalime. +++++

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Kdjdpfxegyd S So Aldon Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Būklė: geras (naudotas), 1 used radial drilling machine Make: Stimin Model: GR 820 H Serial No.: 773 Year: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Drill spindle taper: MK 6 Drill spindle stroke: 390 mm Spindle speeds, 24 steps: 20 – 1400 rpm Right-/left-hand rotation Feed, 12 steps: 0.045 – 1.5 mm/rev Drive: 400 V / 14.5 kVA Arm and drilling unit clamping: electromechanical Distance from machined machine bed to drilling spindle: min. approx. 400 mm max. approx. 1800 mm Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required floor space approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8,500 kg Kdjdstzctmepfx Aldjn

Būklė: naudotas, Each 1 set of thread rolling dies with a 63 mm bore M 12x1.5 Kjdpocn Tb Esfx Aldodn M 16x1.5 M 18x1.5 M 20x1.5 M 22x1.5 M 10x1 Diameter: 160 mm Roll width varies: 60, 70, 80 mm

Būklė: naudotas, Gamybos metai: 1986, Cutting diameter: 460 mm Saw band length: 5,334 mm Cutting width: 1.3 mm Cutting area (square): 320 x 320 mm Cutting area (flat): 500 x 320 mm Control: minipos 807 Cutting speed: 16 - 80 m/min Saw band dimensions: 5,334 x 41 x 1.3 mm Feed length: 580 mm Kdjdpfotqqrfsx Aldsn Multiple feed length: 5,800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: roller conveyor 4,150 mm long, roller conveyor 2,150 mm long, bundle clamping device, chip conveyor, coolant system

Būklė: labai geros būklės (naudotas), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram bore: 40 mm Table through-hole: 240 x 140 mm Die height with max. stroke up and ram adjustment up: 360 mm Total power requirement: 4 kW Machine weight approx.: 3.41 t Kedstrhf Aepfx Aldedn Required space approx.: 0.8 x 1.75 x 2.1 m The machine has been partially overhauled in our workshop as follows: - Disassembly, cleaning, and inspection - Table surface milled - New paintwork: machine in light gray/Enzian blue, ram assembly in orange - Shaft crack inspection carried out - Ortlinghaus KBK + additional brake dismantled, cleaned, inspected, new seals installed - Additional air accumulator - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with piping (previously manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switch - New two-hand control panel - New foot switch - Current accident prevention inspection (UVV) with brake time measurement - Machine safety for manual loading operations

Būklė: naudotas, Gamybos metai: 1991, Spaudimo galia 1.500 kN Eigos reguliavimas 20 - 132 mm Stūmoklio reguliavimas maks. 90 mm Kdedpfx Alerm Nqmsden Eigos dažnis 50 / 75 1/min. Papildoma informacija ir nuotraukos pagal užklausą Naudota, presas buvo visiškai išardytas Neveikia, būtinas mechaninis ir elektrinis remontas Šiuo metu presas vėl surinktas mechaniškai

Gamybos metai: 1991, būklė: paruoštas naudoti (naudotas), Range of slot widths: 2mm–32mm, max. ram stroke: 300mm, strokes per minute: 300, max. installation height: 450mm, feed: 0.01mm–0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions (X/Y/Z): approx. 2500mm / 1500mm / 2200mm, weight: approx. 2200kg, control system: fk electronic Dialog CNC. On-site inspection is possible. Kdsdpju D Aagjfx Aldon