Vertikalus apdirbimo centras

Röders Tec RP800

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Portal machining center for HSC milling The machine operates within a Röders RCM Automation system. It can therefore be integrated into an automated manufacturing environment. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Work table - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control - Röders HSC RMS6, including software for: Milling simulation and pocket machining - Electronic hand controller and mouse - Ethernet interface integrated into Windows NT - Remote maintenance capability for RSM 6 machine control Machine construction - Portal design with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for the milling spindle - Infrared measuring probe for automatic: Tool length compensation, diameter measurement, and tool breakage detection - Microjet spray cooling and lubrication unit - Fixed bearing and spindle nuts are water-cooled - Full safety enclosure (crane loading possible) - Connection for workspace extraction system - 2 chip conveyor screws - Workpiece cleaning via separate air nozzles Machine data - Footprint (excluding service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and servicing have been carried out regularly. Gedpfx Ahevri Nmo Asub A demonstration under power and in operation is possible by prior appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Siūlome įvairias naudotas 3R sistemas. Sistemos labai geros būklės ir visiškai veikiančios. Apžiūra galima susitarus. Poz. 1 Sistema 3R-203 Sukamasis WEDM elementas 360°, Poz. 2–4 Sistema 3R-201J Adapteris WEDM 90°, Poz. 5–6 Sistema 3R-202 MiniBlock, Poz. 7+8 Sistema 3R-204 Aukščio reguliavimo adapteris WEDM, Poz. 9 Sistema 3R-218/30S Laikiklių komplektas, Poz. 11 Sistema 3R-602.21 Rankinis Macro spaustukas, Poz. 12 Sistema 3R-294.3 Prispaudimo griebtuvas, Poz. 15 Sistema 3R-293.3 SuperVice, Poz. 17 Sistema 3R-200-4J-2 470 mm, 470 mm, 330 mm, 138 mm, Poz. 18 Sistema 3R-239–545 0006-V01, Sistema 3R-239–495. Galimas siuntimas ir apžiūra! Godpfjxqn Ubsx Ah Aoub

Būklė: geras (naudotas), Gamybos metai: 2001, mašinos/transporto priemonės numeris: 88745-38, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 6 785 h, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 36 000 aps./min, stalo apkrova: 800 kg, New spindle + computer installed in 2018 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel (X / Y / Z): 800 / 600 / 400 mm Number of axes: 3 Spindle speed: 36,000 rpm Tool holder: HSK 50 E Tool changer: 30 positions Table size: 880 x 700 mm Workpiece weight capacity: 800 kg MACHINE DETAILS Dimensions (approx.): 2.85 x 3.15 x 3.0 m Weight (approx.): 8.5 t Total operating hours: 179,460 h Operating hours since 2018: 38,141 h Spindle hours since 2018: 6,785 h EQUIPMENT - incl. 29 tool holders - No coolant/minimum quantity lubrication - Spindle cooling device Godpswi Ndkefx Ah Asub - incl. probe - Without vise and clamping fixtures (see picture)

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Required space: 1063/2033 mm Gusdpfsuha Umox Ah Aob - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control unit: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Būklė: naudotas, Gamybos metai: 2016, x-axis: 6,800 mm y-axis: 4,000 mm z-axis: 1,500 mm Control: iTNC 530 HSCI Heidenhain Clearance between columns max.: 5,090 mm Distance spindle center to table: 1,825 mm Type: 175149A-0007 Spindle speed range max.: 19,800 rpm Main spindle drive power: 20 kW Tool holder: HSK-A63 Swivel range B-axis: +115° / -115° Rotational range C-axis: +/- 200° Type: 178099-0005 Spindle speed range max.: 10,020 rpm Main spindle drive power: 20 kW Tool holder: HSK-A100 Swivel range B-axis: +115° / -115° Rotational range C-axis: +/- 200° Clamping area table: 6,000 x 3,000 mm Max. table load: 50.0 t Height above floor: 100 mm Gjdpfx Ahjx Avqbs Aoub Number of T-slots: 12 T-slots width: 28H12 mm T-slot spacing: 250 mm Number of tool stations: 62 (38+24) positions Number of tool stations HSK A63: 37+1 positions Number of tool stations HSK A100: 23+1 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 mm Max. tool weight HSK A63: - kg Max. tool diameter HSK A100: 80 mm Max. tool length HSK A100: 450 mm Max. tool weight HSK A100: - kg Rapid traverse (X / Y / Z): 40,000 mm/min Rapid traverse B/C: 4,320 °/min Feed rate X/Y/Z: 30,000 mm/min Feed rate B/C: 2,160 °/min Max. acceleration: 3.2 m/s² x-axis: 6,800 mm y-axis: 4,000 mm z-axis: 1,500 mm b-axis: +115° / -115° c-axis: +/- 200° Total power requirement: 180 kVA Space requirement approx.: 12.5 x 15.0 x 7.0 m 5-axis high-speed portal large machining center DROOP & Rein - FOGS 40 60 C - Fork-type head

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, Uždarymo jėga: 110 t Sraigto skersmuo: 22 mm Įpurškimo tūris: 41 cm3 Sraigto L/D santykis: 20 Apskaičiuotas darbinis tūris: 41,8 cm3 Tinkamas įpurškimo slėgis: 2 864 bar Gedpfeu Eki Sjx Ah Asub Maks. sraigto apsisukimų dažnis: 500 min Sraigto sukimo momentas: 150 Nm Antgalio kontaktinė jėga: 250/40 mm/kN Išorinis įpurškimo debitas: 76 cm3/s Cilindro šildymo galia: 6,3 kW Šildymo zonų skaičius: 4 Tipas: Horizontalus Pavara: Elektrinė

Būklė: geras (naudotas), Gamybos metai: 2014, Ref. No.: 10553 Manufacturer: HANDTMANN / BAVIUS Model: HBZ Trunnion 120 Year of manufacture: 2014 Control type: CNC control Control system: Heidenhain TNC 640 Location: Halberstadt Country of origin: Germany Machine No.: 200XXXXX X-axis travel: 1270 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Table height: Ø 1200 mm Table load capacity: 2000 kg Max. tool weight: 20 kg Max. tool length: 90 x 200 / 24 x 400 mm Max. tool diameter: Ø 130 mm Tool holder: HSK 100 Number of magazine tool stations: 40 Tool magazine capacity: 140 pcs. Spindle speed (infinitely variable): 14,000 rpm Max. torque: 15,000 Nm Rapid traverse X-axis: max. 60 m/min Rapid traverse Y-axis: max. 60 m/min Rapid traverse Z-axis: max. 60 m/min Machine length: 7500 mm Machine width: 5500 mm Machine height: 3500 mm Machine weight approx.: 26 t Rapid traverse C-axis: max. 25 rpm Rapid traverse A-axis: max. 20 rpm A-axis (swivel axis): -30 / +120° C-axis (rotary table axis): 360° Additional information: - Horizontal machining center, Y-axis arranged vertically - Machine frame constructed as a welded structure - Mounted on height-adjustable precision wedge shoes - Chip tray with coolant system for external high-volume coolant Capacity: approx. 400 liters, with fresh water pump, low-pressure circuit, approx. 40 l/min at approx. 5 bar, and flushing nozzles on the Z-axis and/or spindle - Full safety enclosure - Stainless steel interior lining - Work area lighting - Manual loading door to work area with polycarbonate safety window with glass overlay - Side viewing window to work area with polycarbonate safety window with glass overlay - Maintenance area with free access - Hollow shank taper HSK 100 - Tool clamping by spring pressure, unclamping hydraulic - Tool clamping control Gusdpfx Ahsx Hn A Te Asb - Taper cleaning - Includes spindle orientation Machine can be inspected under power by prior arrangement.

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), A Schenker spring coiling machine, including a 2-finger coiling system (left and right), a multi-stroke device, and a Böhm MRS-1 length measuring unit, is available. Wire diameter range: 0.4 mm – 1.8 mm, spring outer diameter: 2 mm – 30 mm, production output: 400 springs/min, max. material strength: 2400 N/mm², spring outer diameter range: 2 mm – 30 mm, wire feed lengths: 30 mm / 470 mm / 770 mm / 1200 mm. Machine dimensions (X/Y/Z): approx. 1150 mm / 900 mm / 1450 mm, weight: approx. 1000 kg. In 2008, the drive motor was replaced with a frequency-controlled servo motor. Documentation is available. On-site inspection is possible. Godpfxjv Ip Sms Ah Ajub

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 700 mm, bendras aukštis: 2 800 mm, bendras ilgis: 1 350 mm, bendras plotis: 1 260 mm, ruošinio svoris (maks.): 300 kg, stalo plotis: 450 mm, bendras svoris: 2 300 kg, įvesties srovės tipas: trifazis, stalo ilgis: 888 mm, gręžimo gylis: 500 mm, Technical Equipment Godpjvppw Sjfx Ah Aeub - 4-way guide changer - 32-position electrode changer - Prepared for rotary-swivel axis - High-quality drive axes and guides - Integrated compressor cooling units for electronics and external connection option for dielectric cooling - High erosion performance thanks to MOSET generator - Fine filter for working with small tube diameters EROSIX CONTROL SYSTEM - Fast probing - Simple programming for complex 5-axis machining - Comprehensive measuring cycles - Program transfer and storage via TCP/IP interface - High operating comfort

Būklė: geras (naudotas), Atstumas tarp centrų: 1000 mm Centrų aukštis: 175 mm CNC prekės ženklas: FANUC Gujdstrgn Topfx Ah Aeb CNC modelis: Oi-TD