AUTOMATINIS DAŽŲ PARDUOTUVĖS

PROTON

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 1 395 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040877,  4-axis (X, Y, Z, A) machining centre,  Designed for economical and efficient machining of aluminium profiles and thin-walled steel profiles, Nledpfxouc U S Ne Adusi  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and tapping are performed on a stationary profile,  Continuous machining with the use of all tools,  Co-linear tool magazine ensures short tool change times, resulting in optimal processing cycles,  The magazine can be equipped with eight tools,  Windows operating system,  Machine equipped with eluCam software,  Max. machining field length with end machining: 4200 mm,  Max. machining field length without end machining: 4320 mm,  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots),

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency. Nljdpfx Aoh Rdwxeduji

Gamybos metai: 2019, Sąlyga: naujas, Powder Coating System Mini – for Beginners The Spark / ROMER® Powder Coating System Mini consists of: Powder Oven SLS-9 small (Internal dimensions: 1200x1400x1200 mm – without transport system) Powder Booth KPZ-2 Nedpsctx Irefx Adusli Delivery time: approx. 12 to 16 weeks after order placement Shipping costs are calculated individually (self-collection also possible). In order to provide you with a detailed quotation for a system tailored to your application, we require further details with regard to the intended use and batch size. We will promptly prepare an offer for a suitable system in your requested dimensions. Terms of payment: 30% deposit and 70% balance payable upon notification of shipping readiness.

Sąlyga: naujas, Gamybos metai: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thicknesses, suitable for chairs, tables, beds, and related items. Nljdpfoqnufvsx Aduoi The main features of the machine are: frame made of electro-welded steel; rotating disc with two counter-rotating sanding belts driven by an electric motor, with rotational movement around the workpiece; electric control panel; two adjustable workbenches (infeed – outfeed); possibility of fitting two automatic workpiece feed units with adjustable speed via inverter. Sanding belts: 80 x 1260 mm Minimum / Maximum workpiece diameter: 10–100 mm (ø) Minimum bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli

Sąlyga: naujas, Gamybos metai: 2025, Pressure 40 t Stroke 250 mm Table size 625 x 1100 mm Flat bar - flat 200 x 20 mm Maximum tube diameter 2" Table height 950 mm Working speed 9.1 - 4.7 mm/sec Return speed 45 mm/sec Machine weight approx. 750 kg Required space approx. 1.25 x 0.9 x 1 m Total power requirement 3 kW Oil volume 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure adjustment UNDER LOAD via handwheels 2) UNDERSLUNG cylinder allows for 360° bending! 3) Operation from the front, not from the side 4) Patented conical tool holder Nlsdpjvx Dwrefx Aduoi Additionally, immersion depth and return position can be adjusted with handwheels, infinitely variable feed adjustment. Machines also available in the following sizes: Pressing capacity from 22 to 150 t, stroke from 200 to 450 mm, as well as with 2-axis control (immersion depth + lateral stop). A comprehensive range of tools for various applications available on request. SIMASV bending presses – quality machines since 1957.

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) 42 reviews ✈️ Shipping available: 45-day delivery ✈️ ✅✅✅Energy Class A+++✅✅✅ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ⭐€10,850 PLUS VAT & SHIPPING⭐ ►►Buy-Now◄◄ ✳️Maintain your liquidity! We offer a wide variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from our price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Spray Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height: 561 [mm] ✔️Filtration system: Double-layer water curtain ✔️Filter media: mains water, panel filter, and mechanical separator with backwash ✔️Filter media cleaning: fine and coarse grating ✔️Pump capacity: 1.5 [kW/h] 940 [rpm] x 1 unit ✔️Number of fans: 1 unit ✔️Fan capacity: 5,400 m3/h x 1 ✔️Fan motor power: 3 kW/h Njdpfx Adsc Uthdeusli ⭐Booths can be manufactured from galvanized sheet or stainless steel. They can be designed for integration into both automatic and manual systems. ⭐A platform is installed at the pool for material and personnel safety, covering the entire pool area. ⭐In the Wetline spray booth, environmental pollution is prevented by the simultaneous application of three different filtration systems. ⭐Wet paint particles extracted from the air by a suction fan are captured by the water curtain at the rear of the booth and transferred to the pool. ⭐Trace amounts of wet paint particles not captured by the water curtain are collected by the separators located at the suction channels behind the water curtain, with fresh air discharged through the exhaust. ⭐A backwash system is applied in the separator section to enhance the retention of moist paint particles. The filtration efficiency, increased by spraying wash water through nozzles onto the contact surface, is maximized. ⭐Paint-contaminated wastewater accumulating in the basin passes through both coarse and fine grates as it enters the pump suction chamber, preventing clogging of the pump nozzles and ensuring effective retention of paint particles. ⭐When the wastewater in the pool becomes unusable, it can be drained by using the wastewater valve located behind the grates in the suction section. ⭐By implementing a paint separator system, the water in the basin is cleaned of paint and continually reused. ⭐Separated paint residues are dewatered by using a filter press and must be disposed of properly. ⭐The listed price refers to the smallest standard size in stainless steel. All equipment/machines are new, not used. Looking for a special configuration❗ Call us now❗ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Lisec Portal-Lader Nledpfx Adsrr Tgasuji PKL-60/30P SBL60/30KR PKL Spannweite: 19.100 - 19.560 mm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system Nledpjuiy Nyefx Aduji - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 11 A, įėjimo dažnis: 50 Hz,

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm Nlodpfx Adeuiy Ngouoi - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff