Suvirinimo stalas

Protec KT 5000 HV

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Welding Turntable Protec KT 5000 HV Complete set including hand and double foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Gedpfoficr Usx Abdsil Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Gisdpfx Abeg Tdpgjdjl Speed from 0.01 to 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 5 000 kg, Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Gedpfjl Dq U Uex Abdjil Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.9 rpm CE certified

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Complete set incl. single and dual foot remote control Digital display for speed Hydraulic height adjustment Dimensions: - Tilted height min: 800 mm - Tilted height max: 1900 mm Gedpfx Aem Ew Stjbdoil - Horizontal height min: 1050 mm - Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed from 0.01 to approx. 0.7 rpm.

Gamybos metai: 1992, Sąlyga: labai geros būklės (naudotas), Na sprzedaż: używana prasa hydrauliczna H-ramowa 700 ton Producent: Muller Siła nacisku (tony): 700 Liczba cylindrów: 2 Wymiary stołu (x-y/mm): 4000×2200 Gedpfx Abjhcfzkedoil Wymiary suwaka (x-y/mm): 4000×2200 Skok (mm): 1400 Światło przy górnym położeniu suwaka (mm): 1920 Siła poduszki (tony): 400 Skok poduszki (mm): 500

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Gijdpfencfvhox Abdjl Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel Giodpfsd Ab H Hjx Abdsl • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Gsdpofg E Hlsfx Abdeil Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naudotas, Gamybos metai: 2021, Heidenhain TNC 640 valdymas Važiavimo eiga – x 3.500 mm Važiavimo eiga – y 1.200 mm Važiavimo eiga – z 1.500 mm Sūkių dažnis 4.000 aps./min Giodpex A H Scofx Abdel Maks. galia 37 kW Maks. sukimo momentas 644 Nm Padalinimas 2,5 ° Darbinis plotas 3.700 x 1.000 mm Maks. stalo apkrova 9.000 kg Maks. įrankio skersmuo 125 (250) mm Maks. įrankio ilgis 400 mm Bendra: - Pavaros velenas: SK 50 Frezavimo galva (velenas): - Technologija: įstrižinė galva su pavaros velenu Įrankių magazinas: - Technologija: grandininis įrankių magazinas - Įrankių keitiklis: dvigubos rankenos - Stotelių skaičius: 40 vnt Įranga/priedai: - Atstumų matavimo sistemos: tiesioginės visose ašyse - Drožlių šalinimas: drožlių transporteris - Aušinimo skysčio tiekimas: didelio slėgio sistema (IKZ), 20 bar - Ruošinio matavimas: Renishaw matavimo zondas - Paruošimo režimas: elektroninis rankinis valdiklis - Programinės įrangos pasirinktis: adaptuota valdymo sistema

Sąlyga: naujas, Gamybos metai: 2025, The drilling and milling machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. Various accessories can be mounted on the machine. HEAVY AND STABLE CAST IRON BODY MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN MASSIVE CROSS TABLE WITH PRECISION-GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Optional machine base available – €200 Technical specifications MAXIMUM DRILLING CAPACITY: 45 mm MAXIMUM FACE MILLING: 80 mm MAXIMUM SLOT/FACE MILLING: 28 mm MAXIMUM THREAD CUTTING: 12 mm QUILL TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min⁻¹ MAX. DISTANCE SPINDLE NOSE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN: 260 mm Gjdpfxeud H Huo Abdoil WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available equipment MK4/B18 drill chuck arbor Service tools 3–16 mm/B18 drill chuck MK4/MK3 reduction sleeve MK3/MK2 reduction sleeve Polish-language operating manual