Suvirinimo savo ruožtu lentelė, sukamasis stalas

Protec KT 300

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Ppedpfx Ahjrypmge Hsl Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length Ppedpfod Ab H Hex Ah Hol • Hardened rolls are recommended

Sąlyga: geras (naudotas), Gamybos metai: 2024, Welding Turntable KT 300 Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Ppjdobvk I Eepfx Ah Hel Infinitely variable tilt range via crank gear motor: 0 – 90° Speed: 0.3 – 2.5 rpm Includes foot remote control Optional: Quick-Change Chuck Diameter 300 mm, €450.-

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding Positioner KT 300 Load Capacity Horizontal: 300 kg, Tilted: 150 kg Power Supply: 220V, 50 Hz Table Diameter: 450 mm Height: 500 mm Tilt Range: continuously adjustable via geared crank motor 0 - 90° Rotation Speed: 0.3 to 2.5 rpm Incl. foot remote control Optional extra: Ppedpfx Ahsc Ug Tlo Hol Quick-action chuck Diameter: 300 mm, €450.-

Sąlyga: naujas, Article: Welding Turntable 50 kg Type: KT-50 without chuck Max. load capacity: 50kg horizontal Max. load capacity: 25kg vertical Rotation speed: 1–7.5 rpm Rotational direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor output in operation: 0.08 kW Podebambrspfx Ah Hopl Motor standby output (kW): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price excludes quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and nationwide shipping within Germany: approx. €80

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Įranga: kojinis nuotolinio valdymo pultas, sūkių greitis be galo kintamas, Welding positioner Protec KT 300 H, 170/400 special version - Horizontal load capacity: 300 kg, tilted: 150 kg - Power supply: 220 V, 50 Hz Ppedpevbrqxefx Ah Hjl - Table diameter: 450 mm - Hollow shaft diameter: 170 mm - Table height: 500 mm - Welding current transmission: 400 A - Quick-action chuck, diameter 300 mm, surcharge €550 - Quick-action chuck, diameter 400 mm, surcharge €750 - Crank gear motor, infinitely adjustable from 0 - 90° - Infinitely variable speed from 0.01 to approx. 5 rpm - Incl. foot pedal remote control - Digital display with welding time limitation (optional)

Sąlyga: geras (naudotas), Welding Positioner KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: infinitely adjustable via crank gear motor 0–90° Rotation speed: 0.3–2.5 rpm Includes foot remote control Optional: Quick-change chuck Pedpfx Asb Dymhoh Hopl Diameter: 300 mm, €450.-

Gamybos metai: 2016, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, generuojamas, pristatymo terminas 2026 m. sausio pabaiga, 12 mėn. garantija - Maksimali temperatūra 200°C; pagal pageidavimą gali būti padidinta iki 250°C - Vidiniai matmenys: plotis 1000 x gylis 1000 x aukštis 1500 mm - Išoriniai matmenys: plotis 1765 x gylis 1425 x aukštis 2300 mm - su Jumo Dicon Touch valdikliu - Įvažiavimo bėgiai krosnies pakrovimui - Šildymo galia 36 kW Ppedpfx Asvk Navoh Hol - Savasvoris: 780 kg - Ištraukimo antgalis; išmetimo ventiliatorius ir elektrinis vožtuvas gali būti sumontuoti pagal pageidavimą - Pakrovimo vežimėlis pagal užklausimą (nuotrauka) - Dokumentacija, CE deklaracija Galime organizuoti įrengimo ir paleidimo paslaugas. Apžiūra mūsų sandėlyje pagal susitarimą. Krosnis, krosnys, džiovinimo krosnis, degimo krosnis, šilumos krosnis, šilumos spinta, pramoninė krosnis, atkaitinimo krosnis, kaitinimo krosnis, grūdinimo krosnis, džiovinimo spinta, kamerinė krosnis, užkepimo krosnis, recirkuliacinė džiovinimo spinta, recirkuliacinė krosnis.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 300 kg, Įranga: kojinis nuotolinio valdymo pultas, Welding Turntable Protec KT 300 H, 170/400 special version with hydraulic height adjustment with safety lock against lowering Load capacity of hydraulic platform: 500 kg Horizontal load: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Ppedpswz Rfgofx Ah Hjl Quick-change chuck diameter 300 mm, surcharge €550 Quick-change chuck diameter 400 mm, surcharge €750 Mobile hydraulic height adjustment, surcharge €650 (with locking casters) Counter bearing, yellow, infinitely variable height adjustment €250 Crank gear motor 0 – 90° continuously adjustable Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 300 kg, Welding turntable APS 300, fully functional with chuck Ppsdpsvnz Iyofx Ah Hsl Continuously variable speed approx. 0.01 – 3.5 rpm Swivel range approx. 180° Horizontal height approx. 1100 mm Tilted height approx. 900 mm

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Ppsdod Ixadspfx Ah Hsl Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: beveik kaip naujas (naudotas), Welding Turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, when tilted (to center): 450 mm Length: 650 mm, Width: 650 mm Stepless tilting range via crank gear motor: 0 – 90° Speed: 0.3 – 2.5 rpm Ppodpsdylk Hefx Ah Hel Including foot remote control Surcharge: Self-centering chuck Diameter: 300 mm, €450.-

Gamybos metai: 2020, Sąlyga: beveik kaip naujas (naudotas), Welding Positioner KT 300 Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, Width: 650 mm Tilt range steplessly adjustable via crank gear motor: 0 – 90° Rotational speed: 0.3 – 2.5 rpm Incl. foot remote control Optional extra: Quick-action chuck Ppsdpfed A Etwsx Ah Hol Diameter 400 mm, €550.-

Sąlyga: naujas, Semi-automatic band saw for cutting solid bars and medium-sized profiles with high efficiency and excellent cutting precision. The robust structure provides the machine with the required rigidity and precision to the cutting group. The band drive is powered by a two-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Properly sized flywheels. Ppjdpfx Asfibd Toh Hsl Robust band guides made with sealed guide bearings and adjustable carbide (Widia) plates. Blade tension achieved via an electromechanical device with blade rotation microswitch control. Safety devices against accidents on the flywheel cover guard and the blade. Cutting thickness 1.5 mm. Cutting range 60° left / 60° right. Adjustable stop for repetitive cuts of the same length. Blade cleaning device with brush. Hydraulic power unit motor 0.37 kW. Electric pump 0.09 kW for band cooling. Vice jaw height 200 mm. Vice jaw length 185 mm. Working table height 760 mm. Machine weight 820 kg.

Gamybos metai: 2018, Sąlyga: geras (naudotas), Welding Positioner KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via crank gear motor 0 – 90° Rotation speed: 0.3 – 2.5 rpm Incl. foot remote control Optional extra: Quick-change chuck Ppodsb Dg Aropfx Ah Hsl Diameter: 300 mm, €450.