Lazerio pjovimo staklės

Prima Power CV 5000

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average output power: 200 W – 5000 W Peak output power: Up to 6 kW Wavelength: 10.6 microns Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half angle) Beam diameter at output: 15 mm 1/e², 21 mm full beam Pulsed operation – Pulse repetition rate: 0 – 2 kHz Pulse duration: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max.): 40 °C • Ambient temperature (min.): 10 °C • Relative humidity: < 95 % (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW ⸻ 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10 %, 3-phase Cooling: Ledpfx Ageywwrfjfehd • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mix / Consumption: • He: 99.996 % | 67.7 % | 13.4 – 46.8 SLPH • CO₂: 99.995 % | 4.1 % | 0.9 – 3.0 SLPH • N₂: 99.996 % | 28.2 % | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Dependent on shutter usage