Valdymo spintos „Presto“ sraigtiniai tankintuvai

Presto

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 39117, PRESTO sraigtinis presas su kartono plėšymo įrenginiu ir sujungiamu konteineriu (30 m3) Dkodpsy N Rp Iofx Af Ael

Būklė: geras (naudotas), Renault 270 DCI crane truck, 19 tonnes. Year: 2002. 470,000 km. Engine replacement performed at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: OK. No remote control for the crane. Dedpferhzy Hex Af Aekl

Būklė: geras (naudotas), Gamybos metai: 2012, veikimo valandos: 5 812 h, Baler Presto HPK 50 HS, year of manufacture 2012, with perforator and inclined conveyor belt (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Max. feed volume: 1.06 m³ Cycle time: 19 s Binding: 4-fold Throughput rate at 35 kg/cbm: 5.5 t/h Dkedpsy Idifofx Af Aol 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 10,500 kg Hydraulically movable perforator Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Inclined conveyor Length: 7,931 mm Belt width: 1,400 mm Overall width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: paper, cardboard, film, PET bottles Please note: All technical data is based on manufacturer's information. We accept no liability for the provided details or possible errors. This offer is subject to prior sale, non-binding, and can be revoked at any time. Inspections are possible by prior agreement. Sale is ex works against prepayment, without warranty or guarantee.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, galia: 9,7 kW (13,19 AG), Technical data for Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput capacity: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder interior dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder exterior dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Dksdpsu Tha Iofx Af Asl System application: The PZA type cardboard shredder was used in a Dutch logistics center to pre-shred loose, upright cartons from the returns department before baling. Cartons were loaded manually onto the infeed conveyor and transported directly to the shredder via a sliding belt conveyor. The pre-shredded cartons were then conveyed over several hundred meters to the baling press and compacted there. Scope of delivery: 1 unit Presto Cardboard Shredder (2-shaft shredder) type PZA Remarks: The cardboard shredder was an essential part of the disposal line and was well maintained to ensure high availability for the returns department. The machine is in good condition and immediately operational. Price is per unit, ex works from our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors.

Būklė: naujas, Factory-new stainless steel tank Article number: 10846 Capacity: 550 L Type: Upright on plastic pallet Material (wetted parts): Stainless steel V2A / AISI 304 Dkodjv Dunfopfx Af Ael Number of fixings: Plastic pallet Bottom: Dished bottom Max. operating pressure: Atmospheric Tank dimensions: Internal diameter: 815 mm External diameter: 890 mm Overall height: 1330 mm Cylindrical height: 1070 mm Total width: 890 mm Materials: Interior: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Fittings: Nameplate: No Outlet diameter: 50 mm Distance outlet to floor: 160 mm

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 3 641 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 36 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 080 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, galia: 15 kW (20,39 AG), tūrio srautas: 90 m³/val, Technical Data of Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Dodpfeu Thh Eex Af Aokl Year of Manufacture: 2010 Operating Hours: 3,641 hours Pressing Force (Main Press): 36 t Specific Pressing Force: 467 N/cm² Feed Opening Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput Under Operating Conditions (with material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester plastic twine Throughput with Bulk Density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport Dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (press): approx. 4 t Remarks: The baler has been function-tested in our workshop, then placed in storage, and is therefore available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. An inspection is possible by appointment. We do not assume liability for any technical specifications or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 13 209 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 050 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, alyvos bako talpa: 400 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 108 m³/val, Technical data of the baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March) Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Binding: 4-fold vertical, fully automatic Throughput at a bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg (depending on material) Hydraulic oil tank capacity: 400 L PLC: Siemens S7-200 Effective transport dimensions (excluding press): 6780 x 1800 x 2100 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was in use at a production facility, exclusively for compacting cardboard, and has been regularly serviced. With only 13,209 operating hours, the machine has seen relatively low use. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work was carried out: - Machine cleaned - Bale retainer freed up and lubricated - Light barrier replaced - Twister unit completely disassembled, all bearings and plastic sliders replaced, greased, chain tension adjusted - Knife and counter-knife dismantled, sharpened, and reassembled - Knife gap readjusted - General maintenance performed and greased Scope of delivery for the baler: - 1 baler with wire spool boxes (without wire) - 1 set of machine documentation Comments: Complete documentation available (operating manual, CE declaration, electrical/hydraulic schematic). Viewing by appointment. We accept no liability for technical information or possible errors. Dksdjw U Dt Nspfx Af Ael

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 240 V, aplinkos temperatūra (min.): 16 °C, elektrinė saugiklis: 16 A, įėjimo srovė: 3 A, įėjimo dažnis: 50 Hz, aplinkos temperatūra (maks.): 25 °C, krovimo aukštis: 880 mm, bendras ilgis: 1 850 mm, bendras plotis: 100 mm, bendras svoris: 142 kg, vidinis plotis: 863 mm, vidinis ilgis: 1 723 mm, vidinis aukštis: 733 mm, bakelio talpa: 595 l, energijos suvartojimas: 5 kWh, galia: 0,4 kW (0,54 AG), Įranga: apšvietimas, šaldiklis, Fun Ice SRL este reprezentantul AHT în România de peste 25 de ani. Toate echipamentele sunt recondiționate, însă compania noastră comercializează și unități nerestaurate. În timpul procesului de recondiționare, toate congelatoarele second-hand propuse trec printr-o restaurare completă, realizată în fabrică, respectiv: - eliminarea avariilor și a loviturilor carcasei; - etichetare pe trei laturi în alb RAL9003 / gri RAL7043 (opțional, orice culoare sau design RAL la cerere); - curățare igienică; Dsdpsrhwt Sofx Af Askl - înlocuirea garniturilor pentru capacul de sticlă; - complet accesorizate la interior – set grilaje de perete, rafturi și separatoare; - testare completă a congelatoarelor cu păstrarea statisticilor modificărilor și menținerea temperaturii setate; - atunci când este necesar, reparațiile se efectuează exclusiv cu piese de schimb ORIGINALE NOI de la producător (AHT Cooling Systems GmbH); (Conform politicii companiei, nu se folosesc niciodată piese de tip „donor” de la alte congelatoare pentru recondiționare) - toate congelatoarele sunt ambalate în ambalajul original de transport al producătorului (AHT Cooling Systems GmbH); (La cererea clientului, este posibilă utilizarea unui ambalaj întărit, pentru livrări pe distanțe lungi sau pe drumuri cu infrastructură precară) Toate congelatoarele recondiționate din seria AHT EQ beneficiază de garanție 6 (șase) luni pentru piese de schimb, cu excepția materialelor consumabile sau supuse uzurii (agent frigorific, garnituri, neoane, etc.) - Pot fi utilizate individual (stand-alone) - Pot fi utilizate în linie (multiplexabil) - Accesorii pe stoc (seturi de prindere, capace superioare și laterale pentru multiplexare în insulă, garnituri pentru capacul de sticlă, capace din sticlă culisantă) - Piese de schimb disponibile (compresoare, invertor, panou de control, senzori, ventilatoare)

Būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: PA-399, Print format: A3 Paper size: approx. 31x45 cm Djdpfx Aoh Eh U Rsf Aekl

Būklė: geras (naudotas), Gamybos metai: 2019, veikimo valandos: 1 022 h, Funkcionalumas: visiškai funkcionalus, Baler Presto CC 20 M, year of manufacture 2019 Technical specifications: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1,022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Feed opening: 1030 x 750 mm Feed volume: 0.53 m³ Dksdpfx Afsyz R S He Aol Tying: triple, manual Throughput rate at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2,500 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our location in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical specifications are based on manufacturer information. We accept no liability for the stated details or any possible errors. Offers are non-binding, subject to prior sale and revocation at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Būklė: beveik kaip naujas (naudotas), Manufacturer: Flender Type: K2S-2.5 Backstop: Yes Power: 78 kW Dksdpfx Afjg Stz Aj Ajl Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Ø: 65 mm Output Shaft Ø: 140 mm

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 1 640 h, Funkcionalumas: visiškai funkcionalus, Bale Press Presto CC 40 M, Year of Manufacture 2017 Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Press Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Feed Opening: 1080 x 1100 mm Dkodpfx Afeyz R Hqe Ajl Feed Volume: 0.85 m³ Tying: 4-fold, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel discharge is fully automatic and self-regulating. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. Sales are made in advance payment, ex works, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 7 145 h, Funkcionalumas: visiškai funkcionalus, Channel Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (L x W) Channel Cross-Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput (at) 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles Note: Knives, counter knives, and all sliding plastics have been replaced. Dsdpfx Afoyz R Eyj Askl The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections by appointment only. Sale is ex works, advance payment required, without warranty or guarantee.

Būklė: naudotas, Gamybos metai: 2004, Sato slicer for sale Dsdpfovx N I Njx Af Ajkl

Būklė: geras (naudotas), Gamybos metai: 2015, veikimo valandos: 1 932 h, Funkcionalumas: visiškai funkcionalus, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-tilt device Technical data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput rate at bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It was inspected and tested at our facilities in 28816 Stuhr. The video can be found on our website or YouTube channel. Please note: Dsdpfeyz R Etsx Af Aokl All technical details are based on manufacturer specifications. We accept no liability for the information provided or for any possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by appointment. Sale is against advance payment, ex works, without warranty or guarantee.