Kartono plėštuvas PZA

Presto GmbH & Co. KG PZA

Gamybos metai: 1994, Sąlyga: paruoštas naudoti (naudotas), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (L/W/H): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is exhibiting a fault due to moisture and should be inspected. Nsdsip D Rpopfx Ac Aodd

Sąlyga: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 20 580 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 250 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 450 kg, įėjimo srovė: 59 A, bendras svoris: 12 000 kg, transporto aukštis: 2 750 mm, alyvos bako talpa: 300 l, galia: 30 kW (40,79 AG), transporto plotis: 2 300 mm, transporto ilgis: 8 500 mm, bakelio talpa: 300 l, Good day, We hereby offer you, subject to prior sale, a used baling press manufactured by HSM, type VK 4812. The following technical data is taken from the manufacturer's operating manual and brochures; we cannot guarantee the accuracy or completeness of this information. Manufacturer: HSM Ndodpfx Ast H Rcaec Asd Type: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Pressing force (main press): 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 11647, Rotor knife rows: 3 Stator knife rows: 2 Rotor width: 280 mm Nodpfoghgqzex Ac Aedd Rotor diameter: 280 mm Feed opening dimensions: 300 x 300 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Ndodpju Thbxefx Ac Aed Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: naudotas, Suspended Crane Runway Crane System DEMAG Type KBK 1 Year of manufacture: approx. 2000 Single-rail suspension track with single-girder bridge crane Light crane system made from KBK modular system profiles Lifting capacity: 125 kg Span: 5 meters Ndodpfjhrkrtex Ac Ajd Distance between longitudinal tracks: 4.1 meters Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal track profile = KBK1 Comprising: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) 1 trolley for crane suspension 2 double trolleys for the longitudinal tracks 10 clamp brackets for crane suspension or ceiling mounting (without girder clamps) 6 end caps suitable for KBK1 running rails

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Ndedpsu Thypjfx Ac Ajd Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Ndodpfxjic Rl Ds Ac Aed Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled.

Sąlyga: geras (naudotas), kuro tipas: dyzelinas, Gamybos metai: 1995, Įranga: galvos apsauga, kabina, reguliuojamas strėlė, FUCHS 714 wheeled material handler Year of manufacture: 1995 Fully operational and running condition. Njdpjvu U Aqefx Ac Aedd Cab can be raised. For more details, please call.

Sąlyga: nepatikrintas (naudotas), Hydraulic press for pressing paper and similar materials. The machine was fully operational prior to disassembly. Nsdpfx Ajh Nyfyec Aodd Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (reducible to 2300 mm). Weight approx. 3500 - 4000 kg. For further information, please contact: +48 539 660 495.

Sąlyga: geras (naudotas), Bale-Pak zum Pressen von Spänen in gutem Zustand, inklusive Kratzkettenförderer, ABB Stapelroboter und automatischer Folienwickelmaschine. Ndodpfx Aoimv N Tjc Asd