Funkcinis sraigtinis kompresorius

Presto / H&G diverse

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Sujungimo talpa 30-32 m³ sraigtiniams presams, galima dešinėje arba kairėje pusėje. naudotos, veikiančios sujungimo talpos nuo 4000 €, priklausomai nuo būklės, be PVM. Kdedpfx Abegypd Hovel Galimas pristatymas.

Gamybos metai: 2023, būklė: naujas, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Structure: steel + aluminium Overall dimensions: 3350 x 2200 x 1300 mm Working area: 3100 x 1520 x 140 mm XY-axis drive, dual-sided gantry drive: 4Nm stepper motors with gearboxes, precision class 8 rack and pinions Z-axis drive: stepper motor with ball screw Traversing speed: up to 25 m/min Z-axis control: THC MyPlasm system Collision protection system to safeguard the torch Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1200 kg SUPPLIED WITH: - Control panel - Water table - Replaceable grate - Control software available in German, English, and Polish - CE declaration of conformity - Technical documentation (DTR) - Warranty Ksdsh Rabnjpfx Abvedl Possibility to select a suitable Hypertherm plasma cutter according to the specific needs of the enterprise.

Būklė: naudotas, VIENAAŠIS SMULKINTUVAS WEIMA Kodpjtqd Ndsfx Abvodl MODELIS WLK15 PAGRINDINIS VARIKLIS 90 KW ROTORIAUS PEILIŲ DYDIS 50X50 (NAUJI PEILIAI) ROTORIAUS ILGIS 1500 MM ROTORIAUS SKERSMUO 370 MM ĮRENGINYS 100% VEIKIANTIS PARUOŠTAS DARBUI

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas),

Būklė: labai geros būklės (naudotas), Gamintojas: Strautmann Tipas: PP 1207 Plus Balių formatas (I x P x A): 1200 x 1100 x 730 mm Balių svoris: apie 400–500 kg Išoriniai matmenys (I x P x A): 1850 x 1047 x 3079 mm Transportavimo aukštis: 2500 mm Užpildymo anga: 1190 x 600 mm Spaudimo jėga: 59 t / 580 kN Našumas: 1–2 baliai/val. Rišimų skaičius: 4 Preso svoris: 2300 kg Energijos tiekimas: 400 V / 50 Hz Galia: 4 kW Montavimo vieta: po stogu viduje/lauke Triukšmo lygis: mažiau nei 80 dB(A) Gamybos metai: 2003–2005 Taip pat turiu Strautmann PP 1207 presus, 2009–2011 metų, kaina 5500 EUR Kdjdpfx Ajv Aiymebvol Taip pat turiu Strautmann PP 1208 presus, 2014–2015 metų Strautmann AutoLoadBaler, 2018 metų, kaina 7500 EUR

Būklė: geras (naudotas), Gamybos metai: 2002,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Ksdovf E Avspfx Abvjdl Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naudotas, No. 10028 Cable Granulation Plant FRS BK 60 Used Kdodpfsxwdndjx Abvel According to our customer, the machine is fully functional and can be inspected and tested on site. Cable granulation plant for up to approx. 1000 kg of cable per hour (as stated by customer) Motor and blades were replaced in 2025 Rotor dimensions: 610 x 500 mm 14 blades Motor power: 45 kW Incl. magnetic conveyor belt Cylinder size: 400 x 120 mm Motor power: 1.5 kW Incl. screen with two outlets Motor power: 0.35 kW Installation dimensions: approx. 7000 x 6000 mm (L x W) Transport dimensions: approx. 6000 x 2400 x 2600 mm (L x W x H) Weight: approx. 6000 kg Sale on behalf of the customer, ex location near 69123 Heidelberg, without dismantling, transport or installation. Dismantling, transport and loading by us possible as an option. Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is on an as-is basis Technical data, condition description, year of manufacture, and scope of delivery based on manufacturer brochure or previous owner—without guarantee. Subject to prior sale. For used machines, any warranty is excluded—the sale is governed by: "sold as seen" Pictures and videos are for example purposes only and do not represent the actual scope of delivery. Payment terms: prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), Material throughput: LDPE: 110 kg/h, PA6.0/LDPE/EVOH: 150 kg/h, PP/PA6.0/LDPE/EVOH: 135 kg/h, PA6.0/LDPE: 120 kg/h, EVA/LDPE: 150 kg/h. Rated power: 77 kW, PCU power: 30 kW, extruder power: 18.5 kW, motor power: 10.7 kW, heating zones: 1, heating capacity: 12 kW. Documentation available. On-site inspection possible. Kodpfxjwty Hks Abvsdl

Būklė: paruoštas naudoti (naudotas), HSM VK 42/1200 Fully Automatic Baler Kedera Nrxjpfx Abvedl Pressing force: 42 tonnes Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 metres Press weight: approx. 6000 kg Binding: 4 x automatic wire tying