Ilgas stalo rotacinis plokščio šlifavimo staklės

Praehoma Kehren L20S

Sąlyga: naudotas, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of Manufacture: 1973 Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center - table surface max. 600 mm Distance spindle center - magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Cross rapid traverse 3 m/min Vertical feed 0.001 – 0.020 mm per feed pulse Vertical rapid traverse 0.250 m/min Gisdpfxsd Hbafj Abdol Grinding wheel speed 1400 / 2800 rpm Motor power hydraulic pump 2.2 kW Motor power grinding spindle 5 / 6 kW Electrical connection 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic table longitudinal movement - Grinding wheel dressing unit on the spindle head - Electromagnetic plate, construction height 83 mm - Side-mounted coolant unit with magnetic filter in the filter housing - Recirculating grinding spindle lubrication - Freestanding electrical cabinet (800 x 500 mm) - Swiveling control panel - Operating manual and spare parts list Space requirements L x W x H: 3000 x 2200 x 2100 mm Weight of surface grinding machine: 3000 kg Weight of control cabinet: 200 kg Good condition

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Gedpfxswl An Ij Abdjil Veleno galia = 30 kW Svoris apie = 12,5 t

Sąlyga: naudotas, Technical Details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm Table surface: 5500/12150 x 3000 mm Maximum workpiece weight: 70,000/105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 - 4000 rpm Feed rate: 1 - 24,000 mm/min w-axis: 1 - 6000 mm/min Distance between columns: 3500 mm Clearance height: 3000 mm Total power requirement: 120 kW Machine weight approx.: 245 t Required floor space approx.: 29.0 x 7.7 x 8.1 m The machine is in an almost as-new condition and was fully modernized in 2020! with CNC SIEMENS 840 D automatic tool magazine for 153 tools automatic milling head magazine for 6 milling heads Machining module - straight - extra-long - Machining module - standard angle - 4000 rpm, 144 x 2.5°, ISO 50 Machining module - slim, extended angle - 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Gijdewc A Shjpfx Abdel Machining module - universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Giedovnd Sujpfx Abdel

Sąlyga: naudotas, Gamybos metai: 2007, Techniniai duomenys: Plokštės skersmuo: 1600 mm Bendra galingumo poreikis: 80 kW Staklių svoris apie: 25 t Užimamas plotas apie: 4,4 x 4,62 m Godsx Aq E Hepfx Abdsil Maksimalus ruošinio skersmuo: 2000 mm Didžiausias skersmuo tekinant frontaliai: 1800 mm Įrankio laikiklis: ISO50 Staklės reguliariai aptarnautos, techniškai geros būklės. Su C ašimi.

Sąlyga: naudotas, VTL SC 17 CC vertikalus revolverinis tekinimo staklės Specifikacija: Giedoxdcxuopfx Abdol Priekinio disko skersmuo: 1450 mm Sukimosi skersmuo: 1700 mm Tekinimo aukštis: 1200 mm Staklių svoris apie: 22 t

Sąlyga: geras (naudotas), Gamybos metai: 1988, Sunkiojo tipo didelio tikslumo horizontalus tekinimo staklės su hidrauline Rohm užspaudimo sistema, stumdoma dalis su dviem darbo padėtimis, Sauter 4 pusių įrankių laikiklis, žiedinio tekinimo agregatas, CNC 6 ašių, griebtuvas, drožlių transporterio sistema. Tinkamos dideliems medžiagos kiekiams nuimti bei itin tiksliam tekinimui. Staklės modifikuotos, sumontuotas 2000 mm skersmens veidinis tvirtinimo diskas, padidinti matmenys. Pagaminimo metai: 1988 Pagaminta: Vokietija Tekinimo diametras virš lovos: 2500 mm Tekinimo diametras virš teleskopinių gaubtų: 2200 mm Tekinimo diametras virš stumdomosios dalies: 1400 mm Tekinimo ilgis: 6000 mm 3 griebtuvų stalas, 2000 mm Gjdpfx Abjxmb Adsdeil Veleno skylė: 200 mm Prikabinamas žiedinio tekinimo įtaisas Apdirbamo ruošinio svoris: 4.500–40.000 kg Revolverinė galva: 4 pozicijos Veleno apsukos: 4–400 aps./min. Pagrindinis variklis Siemens 95,5 kW Didžiausias sukimo momentas: 40.000 Nm Bendras energijos poreikis: 125 kW Valdymas: CNC SIEMENS 8T, 6 valdomos ašys Staklių svoris: 43.000 kg Reikalinga erdvė: 13.000x4.000 mm

Sąlyga: geras (naudotas), HURON MU4 Milling Machine Table surface 1450 x 460 mm 5 T-slots 16 mm Longitudinal travel 1,300 mm Cross travel 700 mm Vertical travel 500 mm Spindle taper ISO 40 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Maximum table load 1,500 kg Maximum clearance under head 530 mm Spindle motor 8.8 kW Feed motor 3.5 HP Coolant pump power 1.6 HP Overall dimensions (L x W x H) 2,000 x 2,000 mm Approximate weight 4 tonnes Gsdpfsu Hifzox Abdeil

Sąlyga: naudotas, Gamybos metai: 2000, x-travel: 3,700 mm y-travel: 3,050 mm z-travel: 1,000 mm Control: HEIDENHAIN TNC-430 PA Distance between columns: 2,300 mm Spindle nose to table surface: 1,175 mm Gijdpowg Hrgofx Abdol Rapid traverse x/y/z: 25,000 mm/min Working feedrate: 15,000 mm/min Tool holder: ISO-50 – DIN 69871 Table load capacity: 20,000 kg Spindle motor: 37 kW Milling head – swivel range: +/- 45° Milling head B axis: 360,000 positions Tool changer: 30 positions/tools Chip conveyor included Internal coolant supply: 20 bar Table size: 4,000 x 1,800 mm Machine weight: approx. 42 t Model: KPU-4000 AR

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Gjdpfstzdyzjx Abdoil Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!