Driller

POSALUX MONOPER

Būklė: naudotas, TECHNICAL DATA Codjuhabgopfx Apaeri See photos

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units Crsdsvdk N Espfx Apaji KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Well-maintained used Sunnen honing machine with Felsomat loading system. Bore diameter range (internal Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when equipped with CGT tools TurboHone® tools: 3.81 to 32 mm when equipped with MMT tools Connecting rod tools: 53.8 to 63.8 mm when equipped with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Maximum workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Crsdpfxoud Nm Re Apaji Stroke speed range: 33 to 500 strokes/min, adjustable Cooling system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, recommended 5.52 bar Temperature range: 0° to 35° C Floor requirements: (concrete floor) Minimum 150 mm thick Machine dimensions: L 2946 mm x W 2971 mm x H 1829 mm Colour: Pearl grey with tin grey and burgundy accent stripes Weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special Features: Automatic setup: spindle speed, stroke speed, stroke length, feed rate, and spark-out Automatic finish machining: standard Operating modes Automatic: Manual: Series production Single part production Clamping optional

Būklė: geras (naudotas), Gamybos metai: 2006, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Rotational speed of tables: 0–110 rpm Maximum drive power for tables: 2 kW Maximum load of upper table: 20 daN Table diameter: Ø 450 mm Rotational speed of internal drive: 0–115 rpm Maximum internal drive power: 0.5 kW Table drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotational speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Type: Servo-controlled, smooth operation Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotational speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical movement motor: Type: Stepper motor Steps per second: 50 Torque: 1100 Nm Gear ring adjustment: Type: AC brake motor Codew T Tpdjpfx Apaeri 2 positions Voltage: 380V / 50 Hz Rotational speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Internal drive worm gear ratio: Ratio: i = 1:30 Lower system worm gear ratio: Ratio: i = 1:15.5 Upper system worm gear ratio: Ratio: i = 1:15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Mains voltage: 380V 50Hz Rotational speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measuring device: Measuring range: 6 (±3 to ±11000 mm) See details in the Millitron manual Inductive sensor: Measuring range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, the technical information provided is without obligation and subject to change.

Būklė: geras (naudotas), Gamybos metai: 2013, Darbo stalas papildomai ištraukiamas 700 mm į kairę ir į dešinę. Plotis: 1850 mm Crsdpfxow Sdwio Apaji Aukštis: 1800 mm Gylis: 1200 mm

Būklė: naudotas, TECHNICAL DATA - Distance between centers: 400 mm - Center height: 125 mm - Maximum workpiece weight between centers: 150 kg - Z-axis stroke: 600 mm - Z-axis rapid traverse: 15 m/min - Table swiveling: +/- 6 ° GRINDING SPINDLE HEADSTOCK - Grinding wheel dimensions: 500 x 80 x 203.2 mm - Peripheral speed: 60 m/sec - Power: 9.5 kW - Head position: -30 ° WORKPIECE SPINDLE HEADSTOCK - Taper: MT5 - Speeds: 5 - 1500 rpm - Power: 2.1 kW - Bore: 34 mm Credpfxjuhbx Hj Apaji TAILSTOCK - Taper: MT3 - Quill stroke: 80 mm ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed capacity: 16 kVA WEIGHT AND DIMENSIONS - Required floor space: 3,650 x 3,050 mm - Machine height: 2,000 mm - Machine weight: 4,850 kg MACHINE HOURS - Operating hours: 31,000 h EQUIPMENT - CNC: Siemens 840 D - Remote electronic handwheel - Automatic tailstock center - Diameter and length control - Robot for loading and unloading - Cooling unit - Water collection tray - Oil mist extractor - Wheel dresser with diamond roller - 2nd grinding head with CBN grinding wheel and rotating wheel dresser - Fire extinguishing system * *NB: Functionality not guaranteed. Must be checked by a qualified company of the buyer.

Būklė: naudotas, TECHNICAL DATA - Distance between centres: 400 mm - Centre height: 125 mm - Max. workpiece weight between centres: 150 kg - Z-axis travel: 600 mm - Z-axis rapid traverse: 15 m/min - Table swivel range: +/- 6° GRINDING SPINDLE HEADSTOCK - Grinding wheel dimensions: 500 x 80 x 203.2 mm - Peripheral speed: 60 m/sec - Power: 9.5 kW - Head position: -30° WORKPIECE SPINDLE HEADSTOCK - Taper: MT5 - Speeds: 5 - 1,500 rpm - Power: 2.1 kW - Bore: 34 mm TAILSTOCK - Taper: MT3 - Quill stroke: 80 mm ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 16 kVA WEIGHT AND DIMENSIONS - Space requirement: 3,650 x 3,050 mm - Machine height: 2,000 mm - Machine weight: 4,850 kg OPERATING HOURS - Operating hours: 42,000 h EQUIPMENT - CNC: Siemens 840 D - Offset electronic handwheel - Automatic tailstock centre - Diameter and length control - Robot for loading and unloading Cedpfouhbxysx Apaori - Cooling unit - Coolant tray - Oil mist extractor - Diamond dresser with roller - Second grinding head with CBN grinding wheel and rotary dresser - Fire extinguishing system * *NB: Operational functionality not guaranteed. To be tested by a qualified company appointed by the buyer.