"ECOGLASS" OPTINIS RŪŠIUOKLIS EGF-1500

PICVISA ECOGLASS OPTICAL SORTER EGF-1500

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), Mogensen vibrating trough / conveyor in excellent condition – almost unused. 4 units available. Length: 1150 mm, Width: 530 mm. Dcedpfxomf Tk Ao Admer

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Dcedpfxevwlqqs Admor Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 14 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 33 000 kg, galia: 264 kW (358,94 AG), sukimosi greitis (min.): 70 aps./min, įėjimo įtampa: 400 V, Slow-running, robust single-shaft shredder Suitable for the pre-shredding of a wide range of materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or compacted in bales. Dcedpfov S Hyvsx Admor Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: As requested by the customer (mm) Control cabinet: complete (with ABB frequency inverter) Working opening: 2135 x 1750 mm Feed volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 87 rpm (at 50 Hz) Number of rotor blades: 84 pcs Blade dimensions: 172 x 57 x 28 mm Counter knives (bottom): 6 pcs Scraper comb (top): 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions (LxWxH): 5500 x 3050 x 3100 mm, with hopper H=4880 mm Delivery time: immediately Two discharge conveyors available as an option.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 95 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 950 mm, bendras ilgis: 6 200 mm, bendras aukštis: 4 530 mm, bendras svoris: 6 200 kg, diržo plotis: 1 500 mm, kuras: elektra, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, transporto aukštis: 2 350 mm, transporto ilgis: 6 030 mm, transporto plotis: 2 250 mm, Įranga: dokumentacija / vadovas, Westeria Mobile Air Separator Type AirLift move for separating heavy and light materials. Typical applications in the recycling and waste management industry, for example for film extraction from compost (fine or coarse fraction) and mixed construction waste. Dcodpfxevrcigs Admor Throughput capacity depending on material properties: 100-150 m³/h Working width: 1500 mm Colour: RAL 3020 C3M, RAL 7040 Includes: - DiscSpreader for optimal material distribution during the separation process - Piping for blowing light material into a container provided by the customer

Sąlyga: naudotas, Gamybos metai: 2012, galia: 264 kW (358,94 AG), Stationary Shredding Plant M & J 4000S. Electric drive: 2x 132 kW Dsdpfju Dkf Dex Admjcr 400 V AC, 50 Hz Including base frame, hydraulic unit, control cabinet.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Set of shredding shafts newly manufactured. These shafts are available with various knife configurations; the following options are currently possible: Sizes: 450 / 650 / 750 / 850 / 950 Dcjdpfx Adjivpkyjmjr 5 / 6 / 7 / 8 / 9 / 10 knives possible 7 / 8 / 9 discs Suitable for VB-750 / VZ-750 / U-75 / HPS-1.5 / Pronar 2.8 / Impaktor 250 .. 300 / Titan ... We are also happy to accommodate your individual requirements. Please include your company address and contact details in your inquiry. This allows us to create a direct offer and send it to your personal email address.

Sąlyga: geras (naudotas), Screen area: approx. 1,300 x 4,000 mm Dsdpfx Astpgvxsdmecr new semi-mobile steel construction

Sąlyga: paruoštas naudoti (naudotas), Trommelsieb Terra Select mit zusätzlichen Förderbändern Dodpevnmcvefx Admjcr

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 8 590 h, mašinos/transporto priemonės numeris: V300397 - 10, Machine type: BOA Continette II Machine number: V300397 - 10 Standard: complies with CE Machinery Directive and AS 3000 Colour: RAL 5015 Voltage: 240-415 Volt / 50 Hz Hydraulic motor power: 22 kW Degree of protection: IP 55 Insulation class: F Total weight: ± 9,000 kg Overall dimensions (LxWxH): 6415x2665x3034 mm Channel dimensions (LxWxH): 2030x1000x720 mm Hopper dimensions (LxW): 1200x730 mm Bale size (LxWxH): variable*800*730 mm Pressing force (max. 280 bar): 882 kN Specific pressure: 43 tonnes Hydraulic power unit capacity: 800 litres Hydraulic oil specification: Shell Tellus TD 46 Maximum pressure: 280 bar Number of hydraulic cylinders: 3 Type of hydraulic power unit (vertical): H 160-4 Dedpfx Asihpgaodmocr Number of tying wires: 4 PLC: Siemens Simatic CPU S7 Operator panel: Siemens touch panel Noise level: 75-86 dB(A) As of July 6, 2022, the baler has been replaced and not used Spare parts included: forks, tying hooks, hydraulic valves, ram hydraulic cylinder, hydraulic pump, PLC modules, touch panel

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Conveyor belt length: approx. 28 m Discharge height: approx. 10 m Feed hopper approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyors (one of which is flexible) on a 3-axle chassis Powered by ENDRESS generator set, 45 kVA, Dcsdjv Scaxjpfx Admjr