Vibracinė apdailos mašina

PERS Turbo-Line 120

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20250108, bendras aukštis: 2 200 mm, bendras svoris: 700 kg, bendras ilgis: 1 700 mm, bendras plotis: 1 300 mm, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 75 kg, bakelio talpa: 120 l, naudojamo bako talpa: 60 l, įėjimo įtampa: 400 V, sukimosi greitis (min.): 50 aps./min, sukimosi greitis (maks.): 180 aps./min, galia: 4 kW (5,44 AG), įėjimo srovė: 16 A, garantijos trukmė: 12 mėnesiai, Įranga: sūkių greitis be galo kintamas, The Turbo-Line 120 "S" model is equipped with a stainless steel discharge box that is mounted directly onto the deburring machine. When the drum lowers, chips fall through a grid, while the parts to be deburred remain on top. This Turbo-Line machine features a 120-liter drum with vertical, straight sides and a separate bottom section that rotates at an adjustable speed, typically between 115 and 135 rpm, but it can be set between 50 and 180 rpm. During operation, the abrasives inside the drum generate a consistent, spiral motion reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and the base, are lined with at least 26 mm of yellow polyurethane (PU) to ensure a long service life. Fjdpfevvu Snex Ahwjpd The 120-liter processing tank can handle up to 50-60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually controlled via a manual touchscreen interface. Water and compound are added through a manually adjustable ball valve, which is included in the delivery. Finished products are discharged by tilting the drum, a process controlled via the touchscreen. The discharge speed can also be regulated through the frequency converter on the touchscreen.

Būklė: naudotas, Gamybos metai: 2004, Technical details: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Table clamping surface: Ø 700 x 500 mm Spindle speed: 42,000 rpm Tool holder: HSK E50 Control unit: HEIDENHAIN iTNC 530 Tool changer: 60 positions Rapid traverse: 50 m/min Table load – central/max.: 350 kg Fjdpfowzx Nmjx Ahwjpd Total power requirement: 50 kVA Machine weight approx.: 9 t Required space approx.: 3.2 x 2.65 x 2.8 m 5-axis simultaneous HSC machining center, NC rotary swivel table 700 x 500 mm, B-axis 180°, C-axis 360°, Chip conveyor, Electronic handwheel, Laser, Prepared for 3D probe HEIDENHAIN TS 641 (probe not included) BA 4, Oil mist extraction, Spindle cooler, No ICS (internal coolant supply), Approx. 141,300 power-on hours, approx. 64,500 spindle hours total Machine in good condition (measurement protocol available).

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available Fpodpfx Ahjh Rdwxewsd - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Būklė: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Fpsdpfxsq Ukbpj Ahwod Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Būklė: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Fsdecqvhwjpfx Ahwopd Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1967, Įranga: 1 replinis įvyniojimas dešinėje 1 ekscentrinė presas 90 kN Fpodel D N Hvopfx Ahwed 2 siauri slankiklio agregatai 3 standartiniai slankiklio agregatai Darbo sritis: Vielos storio diapazonas: 0,5 - 3,5 mm Juostos plotis: max 32 mm Pateikimo ilgis: max. 170 mm Našumas: max. 250/min

Būklė: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 330 mm z-axis travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 736 m O F F E R We are pleased to offer you, subject to prior sale and errors excepted, from stock without obligation: H E R M L E CNC controlled Universal Tool Milling Machine with 4th Axis Model UWF 600 CNC (HDH TNC 355) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm cross Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 stages, vertical & horizontal 40 – 6,000 rpm Fpedpfx Ahet Hxbwjwod Quill travel, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special Equipment • HEIDENHAIN 4-axis path control Type TNC 355 with graphics and various sub-programs, mobile electronic handwheel • Fixed angle table installed, equipped with CNC dividing head by HOFMANN, type with RÖHM 3-jaw chuck 160 mm diameter, center height approx. 125 mm, possibly also tiltable. Resolution 0.001 ° (dividing head can be removed if required!) • Vertical head can be easily swung away for use of horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different milling arbors • Separate free-standing control cabinet, separate free-standing coolant system • Central lubrication, ammeter display, etc. Ideal machine for toolmaking and production of electrodes Condition: good – ready for demonstration, controller in HDH unit has been replaced Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice Other conventional and CNC milling machines from DECKEL, MAHO, MIKRON or HERMLE and other well-known manufacturers in stock! Please enquire with us.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB-SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm BUSH HOLDER 1 - Number of positions: 9 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 3 BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 57,297 h - Spindle hours: 39,537 h ACCESSORIES - Control: Fanuc 18iT - Driven guide bushing - Part catcher Fpsdpfx Ahju Elk Dewod - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: IEMCA SMART 316/32L - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company of the buyer. - Electrical transformer - Number of driven tool holders: 3

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 331/43, Drilling capacity: 3 mm Throat depth: 100 mm Spindle speeds: 6300 and 9000 rpm Fedpfx Aofnbgqohwspd Drive motor: 380 V, 0.18 kW Required space: 470 x 250 x 520 mm Weight: 39 kg

Būklė: naudotas, Gamybos metai: 2013, tekinimo skersmuo virš slankiojančio stalo: 435 mm, tekinimo skersmuo virš viršutinio vežimo: 245 mm, centro aukštis: 210 mm, plotis centre: 1 500 mm, bendras svoris: 1 700 kg, Technical specifications Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Fpodpfx Aheykakpewjd Center height: 210 mm Distance between centers: 1500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Infinitely variable speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks by Röhm Duro • Multifix quick-change toolpost + 10 inserts • Fahrion collet chuck + approx. 33 collets • Fixed and travelling steady rests • Various live and dead centers + drill chuck • Coolant system • Documentation Heidenhain ND 780 digital position indicator • 3-axis display for bed, cross, and top slide • Tool memory for 16 tools, with reference point per axis • Sum key for Z and Zo axes • Switchable between inch/metric • X axis travel can be displayed as radius or diameter • Delta key – “distance-to-zero” display • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.