Koloninė taškinio suvirinimo mašina

PEI PBP 126 PX

Gamybos metai: 1992, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 29-0288, Offer 04612 Technical Data: - Cutting capacity at 90° round: 260 mm - Cutting capacity at 90° flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm Hsdjgin Ndepfx Abvsfg - Cutting capacity at 45° flat: 240 x 200 mm - Machine mounted on original turntable - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Būklė: naudotas, Outstanding welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional units. This performance results in significant energy cost savings. • More than 100 synergic characteristic curves for nearly all base materials (factory-equipped) • Process variety: - MIG/MAG standard - MIG/MAG pulse - MIG/MAG special arc types - MIG brazing - MMA welding (basic, rutile, cellulosic) - Gouging with electrode diameters up to 8.0 mm • High-performance equipment up to 500 A at 60% duty cycle • Automation interface A1, no additional interface cards required for simple, analogue integration • 99 memory locations • Password-protected parameter locking (fine adjustment within +/-20% still possible) Hfodpfx Aswwtwdjbvjg • Program call-up via torch trigger • Simple polarity change

Būklė: naujas, Gamybos metai: 2026, Compact device utilizing FIBER technology designed for welding various types of metals, offering precision far superior to traditional welding methods. Advanced technological solutions used in the offered welder enable the creation of high-quality, repeatable welds on thin-walled materials and parts without the risk of deformation. Advantages of the laser welder: - Easy to operate – thanks to the implemented solutions and well-thought-out construction, the operator can begin work after brief training - Minimal indirect radiation; only protective goggles are required during operation to filter intense light - Significantly faster welding compared to traditional methods, with productivity potentially increasing by 3 to 10 times - Concentrated beam: minimal material structure change due to the small heat-affected zone - Repeatable welds: nice weld seams with high strength - Capability to weld very thin materials, such as 0.5 mm stainless steel - Option to weld with or without filler wire Maximum power: 2000 W Laser wavelength: 1080 nm Weld penetration depth (stainless steel at 1 m/min): 4.57 mm Weld penetration depth (carbon steel at 1 m/min): 3.59 mm Weld penetration depth (aluminium at 1 m/min): 4.0 mm Weld penetration depth (brass at 1 m/min): 4.0 mm Welding speed: 0–120 mm/s Automatic wire feeder: Ø 0.8 – 1.6 mm Maximum power consumption: ≤6.0 kW Cooling system: water-based Operating voltage: 400V Shielding gas consumption: 20 L/min Dimensions: 600 x 1100 x 1100 mm Weight approx.: 185 kg LATEST GENERATION WELDING HEAD - WOBBLE-type head - Automatic wire feeder included Hfsdpsizr Rljfx Abvog - Adjustable spot size: 0–5 mm - High-power welding head allows multiple beam path types: ○,―,•, ꓷ, 0, ▲, 8 - Integrated connections for shielding gas and cooling system - Interchangeable nozzles allow welding at various angles - 10 m fiber optic cable connects the head to the power source - Welding parameters adjustable directly on the head, eliminating the need to approach the control panel - Fully ergonomic: thanks to its lightweight and flexible design, the head can weld even in hard-to-reach places - Easy to service – fast and trouble-free protective lens replacement Set includes automatic wire feeder The wire feeding system is synchronized with the welder’s programming. The feeder’s task is to supply filler, allowing the operator to focus entirely on head operation. Set contents: - Laser welder with integrated cooling system - Welding gun with focal length adjustment and complete accessory kit - Fiber laser source - Automatic wire feeder - Complete set of cables - Starter set of nozzles and protective lenses WELDABLE MATERIAL THICKNESSES Material / WELDER POWER 1000 W 1500 W 2000 W Stainless steel 0.5–3.0 mm 0.5–4.0 mm 0.5–5.0 mm Carbon steel 0.5–2.5 mm 0.5–3.5 mm 0.5–4.5 mm Galvanized steel 0.5–2.5 mm 0.5–3.0 mm 0.5–4.0 mm Aluminium 0.5–1.2 mm 0.5–1.8 mm 0.5–4.0 mm Brass 0.5–1.2 mm 0.5–1.8 mm 0.5–2.5 mm

Būklė: naudotas, Technical details: Drilling capacity in steel (diameter): 30 mm Throat depth: 260 mm Drilling stroke: 160 mm Spindle taper: MT3 Feed rates: 0.1; 0.2; 0.3 mm/rev and manual Spindle speed: max. 1800 rpm, stepless Max. distance spindle/table: 750 mm Table clamping surface: L: 280 x W: 355 mm Rotating table: no Tilting clamping table: 360 degrees Drill table adjustment, vertical: 600 mm Column diameter: 130 mm Tapping: No Total power requirement: 1.1 kW Approx. machine weight: 570 kg Approx. machine dimensions (LxWxH): 0.9 x 0.9 x 1.9 m This machine is equipped with a cross table. Hfedpfxjva Higj Abvsg Drilling table (LxW): 370 x 500 mm Attachment table (LxW): 420 x 750 mm, clamping surface = 320 x 600 mm, cross travel (X-axis) 250 mm possible Ejector with drift key Coolant system Accessories: Machine vice Machine feet

Būklė: naujas, Gamybos metai: 2025, Technische Daten der KHP60 G automatischen Spiral-Schutzgitter-Schweißmaschine Antrieb: Pneumatisch (Hub- und Senkzylinder) Druck: Bis zu 8 bar Hfodpswvbxtefx Abvsg Leistung: 60 KVA Schweißleistung: 4 Drähte à 5 mm + 5 mm gleichzeitig Maximale Kraft: 610 daN Eingangsspannung: 380 V / 50 Hz Schutzsicherung: 200 A Leistungsregulierung: Leistungsbereich von 1–100 % stufenlos einstellbar über digitalen Mikrocontroller Schweißzeit: 1–100 Zyklen (20 ms – 2 s) einstellbar über digitalen Mikrocontroller Armlänge: 800 mm Kühlung: Wasserkühlung (15 l/min) Netzanschlusskabel: 3 m Schutzart: IP21 Abmessungen (B/L/H): 1100 mm x 2500 mm x 1750 mm Gewicht: 740 kg

Būklė: naudotas, Gamybos metai: 2007, Machine weight approx. 290 kg Space requirements approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practice, the SHARC process enables higher welding speeds while simultaneously enhancing weld quality and reducing welding-related costs (less distortion, improved penetration, minimized discoloration of the workpiece, lower hardening of transition zones, and if required, the use of filler materials can be omitted). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Hfjdpfx Abjwf Rgrevsg Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Būklė: naujas, Gamybos metai: 2026, Slėgis 30,0 t Eigos ilgis 200 mm Stalo paviršius 775 x 190 mm Atstumas tarp kreipiančiųjų 775 mm Padavimo greitis 7,5 mm/sec Darbinis greitis 5,0 mm/sec Grįžimo greitis 10,0 mm/sec Variklio galia 3,0 kW Mašinos svoris apie 400 kg Užimama vieta apie 1.500 x 700 x 1.800 mm Įranga: - Tvirta elektrohidraulinė dirbtuvių presas su fiksuotu cilindru - Puikiai tinka ašių, velenų ir pan. tiesinimui, taip pat kaiščių, guolių, įvorių ir kt. išspaudimui bei įpresavimui - Tvirta plieninė suvirinta konstrukcija intensyviam naudojimui - Stalo aukščio reguliavimas per stūmoklio strypą * Komplekte apskrita plieninė grandinė ir 2 fiksavimo kaiščiai * Stūmoklio strypas su metriniu tvirtinimu - 1 V formos prizminis atramų komplektas - Manometras slėgio indikacijai - Paprasta rankinė valdymo sistema su: * 1x padavimo greitis * 1x darbinis greitis * 1x grįžimo greitis - Stūmoklį galima sustabdyti bet kurioje padėtyje - Hidraulinė talpa šone - Naudojimo instrukcija Hfsdpfexaayhex Abvsg

Būklė: naujas, Turning length 1000 mm Turning diameter 420 mm Swing diameter over bed carriage 255 mm Turning diameter in the gap 580 mm Spindle bore 52.0 mm Spindle speed 45 - 1800 rpm Bed width 250 mm Spindle mount DIN 55029 D 1-6 Tailstock taper 4 MT Quill travel 140 mm Total power requirement 3.0 / 4.5 kW Machine weight approx. 1220 kg Dimensions L-W-H 2070 x 900 x 1600 mm The Smart 410 Pro universal lathe is suitable for performing light and medium-duty turning operations. The basic configuration already includes all essential accessories (3-jaw chuck, steadies, change gears, etc.), making the machine highly versatile. To reduce production times, this model comes standard with a 3-axis digital readout. Features: - Prism bed made of grey cast iron, induction-hardened and precision ground - Electromechanical foot brake to reduce non-productive times - Central, easy-to-use feed and thread control via leadscrew and feed rod - Modern main spindle bearing with precision angular contact ball bearings - Large-dimensioned, hardened and precision ground gears - Hardened and ground gears and shafts, including in the feed gearbox - The speed and feed settings are straightforward, smooth and precise - Adjustable tailstock for taper turning - Handwheel with adjustable fine scale (0.02 mm) - Removable bridge allows machining of workpieces with large diameters Equipment: Hfsdpfx Abjxaavveveg - 3-axis digital readout ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Face plate 350 mm - Fixed steady - max. passage diameter 135 mm - Travelling steady - max. passage diameter 65 mm - Coolant system - Four-way tool post - Safety device for four-way tool post - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread dial indicator - Motor with magnetic brake, CE-compliant - Foot pedal with brake function, CE-compliant - Initial fill with Shell Tellus 46 - LED machine lamp - Change gears - Reducing sleeve - 2 centres - Chip guard - Operating tools - Operating manual

Būklė: naudotas, Puntlastmaschine SCIAKY Typ S0 432 NT Kapazität: für Materialstärken von 0,5 bis 6 mm Halsausladung: 380 mm Hedpfxexnk Tns Abvefg Armabstand: von 190 bis 340 mm Armlänge: von 250 bis 500 mm Druck: 6 bar Spannung: 380 V Breite: 1100 mm Tiefe: 500 mm Gesamthöhe: 1500 mm Gewicht: ca. 500 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras svoris: 2 700 kg, bendras aukštis: 560 mm, bendras plotis: 2 200 mm, bendras ilgis: 5 600 mm, Repair Frame, Professional Straightening Bench TM-GROUP B700, 4 TONS ⭐️COMPLETE WITH ESSENTIAL ACCESSORIES⭐️ Straightening Bench Specifications: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 3.6 tons ✅ Power supply: hydraulic ✅ High-quality hydraulic pump ✅ Max hydraulic pressure: 70 MPa ✅ Frame length: 5600 mm ✅ Frame width: 2200 mm ✅ Frame height: 520 mm ✅ Plate thickness: 12 mm ✅ Compressed air pressure: 0.8 MPa ✅ Maximum pulling force: 100 kN ✅ Tower column working range: 360° ✅ Lift range: 680 mm - 1950 mm ✅ Sturdy and easy vehicle mounting ✅ Frame includes a scissor lift ✅ Universal for all post-accident repairs - The platform is robust, with its panel manufactured in a single CNC cutting process – ensuring no deformation and smooth edges. - All components are shot blasted, eliminating welding stresses, strengthening surface structure, and improving paint adhesion. - The platform is made from high-quality steel sheet, CO₂-shielded welded for strength and rigidity. It features multiple process holes and an ergonomically placed anchoring mechanism. - The tower rotates a full 360° and operates smoothly and precisely. The cylinder works vertically, providing high force and accuracy. - The hydraulic system is powerful, durable, and highly reliable. - Optional precision measuring systems are available, containing vehicle body data and instructions for easier maintenance. - Durable (T8) chain and forged tools made from 45# steel are versatile, convenient, and long-lasting. - Reinforced elements, such as the tower guide ring or equipment base, are cast in a single piece for even force distribution and resistance to deformation. - Equipment ensures precise vehicle mounting, with additional accessories available for brands such as Mercedes-Benz, BMW, Volvo, Renault, and others. ⭐️Scissor lift included in the set!⭐️ Scissor Lift Specifications: ✅ Maximum load: 3000 kg ✅ Maximum height: 950 mm ✅ Minimum height: 185 mm ✅ Maximum external dimensions: 2060-1050 mm ✅ Lift range: 680 mm - 1950 mm ✅ Power supply voltage: 110 V/220 V–50 Hz ✅ Device weight: 400 kg Hfsdpfx Asvx N E Ujbveg - Equipped with a small trailer for easy transport of the lift. - The armrest is flexible, with three types of supports allowing setup at various heights. - Self-locking safety device, unique construction, simple operation, safe and reliable. - Suitable for tyre removal and chassis repairs of small and medium vans and passenger vehicles. ‼️ POSSIBILITY TO PURCHASE THE FRAME WITH A DIFFERENT NUMBER OF DOZERS/TOWERS ‼️