Frezavimo laikikliai 5 vnt

Pagersta Gildemeister SK50 verschiedene Ausführungen

Sąlyga: naudotas, Gamybos metai: 1970, X-travel: 900 mm y-travel: 250 mm Kdodocxxqrjpfx Abasw z-travel: 370 mm Table clamping surface: 1,525 x 325 mm Total power requirement: 9.85 kW Machine weight approx.: 3.1 t Space requirement approx.: 2.0 x 2.5 x 1.7 m

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Urpe slotting machine model M-300 G with tiltable head, slotting machine with a stroke of 0-300mm, strokes per minute: 30-35-40, distance from tool to column: 500mm, adjustable distance from table to ram: 425-585mm, maximum distance between tool and body: 450mm, table surface: 800x325mm, longitudinal table travel: 550mm, cross travel: 265mm, motor power: 5.5 HP, estimated weight: 1850kg, equipped with a universal chuck. Kjdpfx Ajvdknzobasdw

Sąlyga: geras (naudotas), Gamybos metai: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Drilling method: Single-lip drill Drilling depth: Quill spindle: 110 mm Seal housing: 430 mm Seal housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Frequency: 100 – 800 Hz Weight: Approx. 2.6 t Kdedovcbg Sepfx Abajw We do not guarantee the correctness, completeness or up-to-dateness of the information provided.

Sąlyga: naujas, Swing diameter: 560 mm Turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Centre height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed: 35 / 0.059 – 1.646 m/min Face feed: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight: approx. 2560 kg Space requirement: approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty lathe distinguished by high flexibility, precision, and cost-effectiveness. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined cross slide - All guideways adjustable via gib strips - Forward/reverse operation on cross slide via shift spindle - Dual-channel safety electronics - Central lubrication in cross slide - Compound rest swivelling range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, with two adjustable precision tapered roller bearings - Switch with life cycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine calibration 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125 on X and Z axes Ksdpfxoucgr Ij Abaedw - Gears and shafts hardened and ground, running in oil bath on precision bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-change feed gearbox - Emergency stop punch button, motor protection switch, lockable main switch - Emergency stop foot pedal - Tailstock offset for taper turning ±10 mm - Tailstock quill and handwheel with adjustable fine calibration 0.025 mm; quick, simple, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose guidance - Heavily ribbed, induction-hardened, and precision-ground grey cast iron prism bed - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Adjustable leadscrew dial scale Scope of supply: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø113 mm / MT 5 - Fixed centre MT 5 - Fixed and revolving centre MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Sąlyga: geras (naudotas), Gamybos metai: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide travel: 850 mm Drilling method: single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Kdedpfx Abevca Rcjajw Feed – independent drive Feed rate: 20 – 500 mm/min Rapid traverse speed (NC mode): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max travel: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and timeliness of the information provided.

Gamybos metai: 1998, Sąlyga: geras (naudotas), Zoller V520B Magnum Tool Presetting and Measuring Device Kdedpfeicaxqox Abaow Manufacturer: Zoller Model: V 520 Magnum Year of manufacture: 1998 Technical data: Voltage: 230 V Compressed air: 4–6 bar Weight: 180 kg Undercabinet: 140 kg Maximum tool weights Manual fine adjustment: max. 1000 N Automatic fine adjustment: max. 200 N You can find more new and used items in our shop! International shipping costs available on request!

Sąlyga: labai geros būklės (naudotas), Walter Woodtronic NC4 carbide saw blade sharpening machine with loader Kdedpovlgmiofx Abajw

Sąlyga: naudotas, Slotting head, slotting attachment suitable for DECKEL milling machine type FP 2 Serial no.: 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail front edge to gear center: approx. 235 mm Stroke length: max. 80 mm Strokes per minute: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate Kedpfx Aswbi Rbjbaedw - Stroke length adjustable via eccentric adjustment - Driven by the machine's gearbox, within the dovetail guide (same as a standard vertical head) - This slotting attachment is inserted into the dovetail guide in place of the standard vertical milling head (mounting in place of vertical head, milling head) - Drive gear in slotting head: 39 teeth, gear width 16 mm, presumed 20° pressure angle - Slotting head rotatable 360° on flange plate, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a 15° pressure angle on the drive gear DECKEL FP2 + FP3 have a 20° pressure angle on the drive gear

Sąlyga: naudotas, Tool holder, milling arbor, collet chuck, milling tool, adapter, clamping unit, toolholder, -Manufacturer: Sandvik Coromant / Komet, 60 units of SK50 holders / clamping units -Various types: see photos, additional images available on request -Type/quantity: see photo parts list -Price/sale: complete package -Transport dimensions: 600/500/H500 mm -Total weight: 210 kg Kdsdpfjhuf Izjx Abajw

Sąlyga: naudotas, Cutter head, milling arbor, carbide milling cutter, indexable insert milling cutter - Delivery in as-is condition as inspected - Condition: see photos (not complete) - Diameter: 325 mm - Inserts: carbide - Mount: SK50 - Dimensions: 325/325/H210 - Weight: 28.8 kg Kdedpfx Aoc Svm Ujbasw