Centras tekinys
OPTITURN TH 4010V

Name: OPTITURN TH 4010V
Brand: OPTITURN
Availability: InStock

Gamybos metai

2018

Sąlyga

Naudotas

Vieta

Novazzano

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Centras tekinys

Gamintojas:: OPTITURN

Modelis:: TH 4010V

Gamybos metai:: 2018

Sąlyga:: naudotas

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Vieta:: Via Roncaglia 5, 6883 Novazzano, Schweiz

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A21245102

Naujinta paskutinį kartą:: Data 2026.02.17

Aprašymas

OPTIturn TH 4010D Lathe

Precision, gear-driven lathe with digital position display, center height/center distance 205 mm / 1000 mm, motor output 2.4 kW, 400 V, spindle speed 45–1800 rpm, spindle bore Ø 52 mm, spindle foot brake, with automatic longitudinal and cross feed, CAMLOCK chuck mounting, versatile workshop machine. Includes machine stand with chip drawer, LED work lamp, coolant system, etc.

Fully equipped engineer’s lathe.
Hardened and ground bed guideways
Spindle mount Camlock DIN ISO 702-2 No. 5
Guaranteed spindle nose concentricity better than 0.015 mm
Gears and shafts hardened and ground, running in an oil bath on precision bearings
Motor protection switch
DC 24 volt electrical system
Lockable main switch
Bed carriage enables forward/reverse switching
Slide-out chip tray with guide rails
Safety handwheels with disengageable function on X and Z axes
Emergency stop with foot pedal actuation
Machine base with tool cabinet on the right side

Digital Position Display DPA 21
User-friendly membrane keypad, splash-proof, enclosed, and glare-free
Improved working precision
Reduced error rate thanks to clear design
X, Y/Z0, Z-axes each with 8-digit display
Included sensor for spindle speed measurement
Glass scales on all three axes

Connection voltage: 400 V
Motor output: 2.4 kW
Fuse protection: 16 A
Spindle taper: MT 6
Spindle mount: Camlock No. 5
Bedpfx Asykngroahjld
Spindle bore: 52 mm
Center height: 205 mm
Center distance: 1000 mm
Swing over bed: Ø 410 mm
Swing over cross slide: Ø 270 mm
Swing in gap without bridge: Ø 540 mm
Turning length in bed gap: 165 mm
Bed width: 206 mm
Spindle speed: 45 – 1800 rpm
Number of gear stages: 16
Cross slide travel: 100 mm
Compound slide travel: 195 mm
Longitudinal feed range: 0.043 – 0.653 mm/rev
Number of longitudinal feeds: 48
Cross feed range: 0.015 – 0.206 mm/rev
Number of cross feeds: 48
Thread pitches metric: 0.4 – 7 mm/rev
Number of metric threads: 42
Thread pitches imperial: 70 – 4 TPI
Number of imperial threads: 42
Max. toolholder size: 16 x 16 mm
Tailstock taper: MT 3
Tailstock quill stroke: 130 mm
Quill diameter: Ø 45 mm
Dimensions (L x W x H): 1920 x 740 x 1555 mm
Weight: 750 kg

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Dokumentai

21245102-01.pdf

Tiekėjas

Registruota nuo: 2018

9 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+41 91 68... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Centras tekinys Weiler Praktikant VCPlus

Ubstadt-Weiher

1 232 km

Centras tekinys
WeilerPraktikant VCPlus

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014 Machine No. JD12 >> Center height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centers: 650 mm >> Spindle speeds from 30 to 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock taper: MK 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input for feeds and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Threading options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Equipment: >> Weiler digital readout >> Collet chuck system NEW, collets NEW from 3 to 26 mm >> 3-jaw chuck 160 mm with 1 set of jaws >> 4-jaw chuck 160 mm with 2 sets of jaws >> Multifix size B with 3 toolholders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram For Safety: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of respective handwheel when feed is engaged VCplus Digital Readout: >> 8-inch color display >> 3 axes: bed, cross slide, compound slide >> 99 tool memory Bledpfx Aaoydczdehed >> Oriented spindle stop >> Input of constant speed or cutting speed >> Feeds and thread settings displayed >> Thread cutting with electronic limit stop About the Machine: This offer is for a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture: 2014, in very good condition with original paint. The machine is fully functional and comes equipped with new collets and chucks. You are welcome to inspect the machine under power at our facility and verify its condition.

Peržiūrėti detales

Mažas skelbimas

Centras tekinys Cholchester Triumph 2000

Aurach

1 127 km

Centras tekinys
CholchesterTriumph 2000

Skambinti

Sąlyga: geras (naudotas), Please read the technical specifications carefully. If you are considering this machine as an investment, we kindly ask you to provide your complete identification with a correct phone number and email address in order to receive a quotation. Lead and feed screw lathe Colchester Triumph 2000 Turning length: 750 mm Swing over bed: 390 mm Swing over cross slide: 240 mm Spindle bore: Ø 54 mm Spindle mount: 6" D1 Camlock Tailstock: MK4 Quill stroke: 155 mm 16 spindle speeds from 25 to 2000 rpm 39 metric thread pitches from 0.2-14 mm 45 Whitworth thread pitches from 2-72 t.p.i 18 module thread pitches from 0.3-3.5 module 21 diametral pitch thread pitches from 8-44 D.P. 15 longitudinal feeds from 0.04 - 1.0 mm/rev 15 facing feeds from 0.02 - 0.5 mm/rev Dimensions (LxWxH): 2000 x 980 x 1640 mm Bledjyb A Uxjpfx Aahod Weight: 1350 kg Both the machine and the bed are in good condition. The machine runs flawlessly. Cross slide backlash: 0.2 mm Top slide backlash: 0.4 mm Accessories/Equipment: - Chuck guard - Machine lamp - Multifix B toolholder base - Bed stop - 3-jaw chuck D250 mm - Machine feet

Peržiūrėti detales

Mažas skelbimas

Centrinė tekinimo ir veleno tekinimo staklės WMW Mikromat DZFG 200x500

Vokietija

872 km

Centrinė tekinimo ir veleno tekinimo staklės
WMW MikromatDZFG 200x500

Skambinti

Sąlyga: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Bedpfjvadd Isx Aahsld Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Peržiūrėti detales

Mažas skelbimas

Waiblingen

1 218 km

Centras tekinys
WEILERPraktikant 160

Skambinti

Sąlyga: naudotas, Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 91-160-2498, naudojamas kreipiančiųjų ir traukos varžtų tekinimo staklės WEILER PRAKTIKANT 160 Centras aukštis: 160 mm Centras tarp atstumų: 650 mm Bodpoyciw Ajfx Aahsld Veleno sukimosi greitis: apie 48-2.500 aps./min. Veleno skylė: 40,5 mm Uždengti vedamieji ir traukos varžtai. Komplektacija: su 3 ašių skaitmeniniu rodmeniu Heidenhain, drožlių apsauga gale, svirtinė spaustuvo sistemos įranga be spaustuvų, 1 x planavimo plokštė Ø 250 mm, griebtuvų apsauga su elektriniu saugumu, mašinos apšvietimas, greitai keičiama plieno laikiklio sistema Multifix Gr. A su 4 keičiamais laikikliais, lovos ribotuvas, aušinimo sistema ir stacionari lunetė. Staklės yra pas mus adresu 71334 Waiblingen-Beinstein ir iš karto prieinamos. Apžiūra po susitarimo įmanoma.

Peržiūrėti detales

Mažas skelbimas

Tipton

1 719 km

CNC staklės
NAKAMURA TOMESUPER NTJ

Skambinti

Sąlyga: naudotas, Gamybos metai: 2003, NAKAMURA TOME SUPER NTJ frezarka CNC PRODUCENT: NAKAMURA TOME, JAPONIA MODEL: SUPER NTJ ROK PRODUKCJI: 2003 STEROWANIE: FANUC 18 iT B UCHWYT: 210,0 mm MAKS. ŚREDNICA TOCZENIA: 200,0 mm ODLEGŁOŚĆ MIĘDZY KIEROWNICAMI: 780,0 mm ŚREDNICA RURY PRZELOTOWEJ: 80,0 mm POSUWY: - OŚ X: 750,0 mm - OŚ Z: 130,0 mm WIEŻA NARZĘDZIOWA: 2 x 12 pozycji PRĘDKOŚĆ OBROTOWA WRZECIONA: do 5.000 obr./min PRZELOT WRZECIONA: 65,0 mm Blsdpfxjv I Tx Rj Aahsd NOS WRZECIONA: A2-6 DODATKOWO: - CNC podajnik prętów krótkich - Wieża narzędziowa - Przenośnik wiórów - Dokumentacja / instrukcje obsługi

Peržiūrėti detales

Mažas skelbimas

Frezavimo staklės - universalios HERMLE UWF 600 CNC

Metzingen

1 242 km

Frezavimo staklės - universalios
HERMLEUWF 600 CNC

Skambinti

Sąlyga: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 330 mm z-axis travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 736 m O F F E R Bledpot Hxbwofx Aahjd We are pleased to offer you, subject to prior sale and errors excepted, from stock without obligation: H E R M L E CNC controlled Universal Tool Milling Machine with 4th Axis Model UWF 600 CNC (HDH TNC 355) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm cross Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 stages, vertical & horizontal 40 – 6,000 rpm Quill travel, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special Equipment • HEIDENHAIN 4-axis path control Type TNC 355 with graphics and various sub-programs, mobile electronic handwheel • Fixed angle table installed, equipped with CNC dividing head by HOFMANN, type with RÖHM 3-jaw chuck 160 mm diameter, center height approx. 125 mm, possibly also tiltable. Resolution 0.001 ° (dividing head can be removed if required!) • Vertical head can be easily swung away for use of horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different milling arbors • Separate free-standing control cabinet, separate free-standing coolant system • Central lubrication, ammeter display, etc. Ideal machine for toolmaking and production of electrodes Condition: good – ready for demonstration, controller in HDH unit has been replaced Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice Other conventional and CNC milling machines from DECKEL, MAHO, MIKRON or HERMLE and other well-known manufacturers in stock! Please enquire with us.

Peržiūrėti detales

Mažas skelbimas

Centro tekinimo staklės Optimum OPTIturn TH 4620D

Sankt Egidien

894 km

Centro tekinimo staklės
OptimumOPTIturn TH 4620D

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Bjdpfeq Ukbpox Aahold Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Peržiūrėti detales

Mažas skelbimas

CNC šveicariško tipo tekinimo staklės STAR SE-12B

Contamine-sur-Arve

1 588 km

CNC šveicariško tipo tekinimo staklės
STARSE-12B

Skambinti

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE Bedpfjuhaxxjx Aahjld - Max. bar diameter: 13 mm - Spindle speed: 10,000 rpm SUB SPINDLE - Z travel: 140 mm BUSHING HOLDER 1 - Number of positions: 5 COUNTER OPERATION - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 3 x 380 V - Total drive power: 3.5 kVA EQUIPMENT - Control unit: Fanuc 21iT - Parts removal device - Coolant tank * with high-pressure pump - Bar feeder: LNS Alpha 320

Peržiūrėti detales

Mažas skelbimas