Okuma LT 25 MY 2001

Okuma LT 25 MY

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Machining Center – Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of manufacture: 1999 The machine can be inspected under power and in operation by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (like new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/Axis drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ballscrew diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Path measuring system: - Input resolution: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine stations: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (fixture weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (like new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel Iaedpfx Afsv Nxbyo Iol - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of technical details and equipment. - Subject to prior sale -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Iedpfx Afovgxfyj Ieal Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools

Sąlyga: geras (naudotas), Gamybos metai: 1997, Die Maschine ist in gutem Zustand. Iedpfxspy Erre Af Ieal

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm Isdpfewmzhpsx Af Ijal 8-position turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, X ašies eiga: 560 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 625 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, nominali (akivaizdi) galia: 30 kVA, sukimo momentas: 163 Nm, stalo apkrova: 400 kg, sukamosios stalo skersmuo: 400 mm, sukimosi greitis (maks.): 15 000 aps./min, aušinimo skysčio tiekimas: 20 juosta, ašies skaičius: 48, įrankio ilgis: 300 mm, įrankio skersmuo: 70 mm, įrankio svoris: 10 g, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Technical specifications: CNC OSP P 200 Chip conveyor Iasdpfx Afouw Sq Us Iel 48 tools Continuous rotary table with 360,000 positions 15,000 RPM, BT 40 Through-spindle coolant, 20 Bar On-table presetting Shower-type work area washing system Note: The machine has always operated with neat oil, machining Teflon material.

Sąlyga: geras (naudotas), Gamybos metai: 2002, TRAUB TNL 12/7 CNC Long Turning Automatic Lathe Iajdpfxot E Dbyo Af Isl TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF DELIVERY Includes (not limited to): Traub TNL 12/7 CNC Turning Machine Meyrat High-Frequency Spindles, 2 units Tool holders (driven and non-driven) FMB Minimag 3200 C Bar Feeder Hydraulic unit High-pressure pump Chip conveyor Exact scope of delivery as shown in the photo series No liability is assumed for the correctness, completeness, or up-to-dateness of the information provided.

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: Iodpfx Ajh A Sfdof Ijal 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 810 mm, sukimosi skersmuo virš skersinio stumduko: 800 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 25 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 73 mm, X ašies eiga: 210 mm, Y ašies eiga: 110 mm, Z ašies eigos atstumas: 810 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 6 000 aps./min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing Diameter Over Bed: 800 mm Swing Diameter Over Cross Slide: 800 mm Maximum Turning Diameter: 320 mm Standard Turning Diameter: 200 mm Maximum Distance Between Centers: 1,130 mm Maximum Turning Length: 810 mm Maximum Workpiece Dimensions: 300 mm TRAVELS Turret Axis X1 & X2: 210 mm Turret Axis Y1 & Y2: +65 / -45 mm Turret Axis Z1 & Z2: 810 mm Head Axis B2: 920 mm MAIN SPINDLE Maximum Spindle Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Machinable Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° SUBSPINDLE Maximum Speed: 5,000 rpm Motor Power (30 min / continuous): 25/22 kW Maximum Bar Diameter: 65 mm Spindle Bore: 73 mm Spindle Front Bearing Diameter: 120 mm Spindle Nose: JIS A2-6 C-Axis Resolution: 0.001° FEED RATES Turret 1 Rapid Traverse X/Y/Z: 30/20/50 m/min Turret 2 Rapid Traverse X/Y/Z: 30/20/50 m/min Ijdpfowlvlgex Af Ioal TOOL TURRETS Number of Turrets: 2 Number of Tool Stations per Turret: 16 Turning Tool Shank Cross Section: 20 x 20 mm Max Boring Bar Diameter: 32 mm Turret Indexing Time (1 station): 0.18 s Max Speed of Driven Tools: 6,000 rpm Driven Tool Motor Power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Installation Area with Chip Conveyor: 5,120 x 2,720 mm Net Weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Interface for bar feeder • Gantry parts unloading arm • Tool load monitoring and load management system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 self-centering chucks, Ø 210 mm • 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacture: 2010

Sąlyga: naudotas, Gamybos metai: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatisierte Nestingzelle Iaedswh Sfzopfx Af Iel Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere Anschläge + 8 hintere Anschläge jeweils mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für zwei Pumpen mit je 300 m³/h Förderleistung 12 kW (16,1 PS) Elektromotorspindel, ISO 30 Aufnahme, luftgekühlt Blaseinheit Bohrkopf BH 18 A Revolver-Werkzeugwechsler mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced - Maschinen- und Büroversion BIESSE NEST Modul Beladungs- und Entladearm, am Maschinenbalken positioniert Be- und Entladetisch, an der linken Seite des Bearbeitungszentrums positioniert CE-Sicherheitsvorrichtungen Drehklauen-Vakuumpumpe Mechanischer Niederhalter mit pneumatischer Absenkung für Nesting-Anwendungen (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden