Suvirinimo robotas

OKIO AB6-C1400

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing Bjdpfswu Tu Djx Agiscw - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Bcsdpsrypmgjfx Agisw Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras plotis: 950 mm, bendras ilgis: 600 mm, bendras aukštis: 1 850 mm, oro poreikis: 0,9 m³/val, bakelio talpa: 250 l, įėjimo įtampa: 230 V, bendras svoris: 180 kg, Įranga: apšvietimas, kabina, XTON SANDBLASTER™ is a premium sand blasting and glass bead blasting unit, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-loop system and features a unique filtration system with integrated dust separator. Its design ensures exceptionally quiet operation, providing increased user comfort. The unit is equipped with high-quality grain leather gloves, offering excellent resistance to mechanical damage. Additionally, the machine can be painted in any color from the RAL palette. An option for stainless steel construction is also available. EQUIPMENT: - Work table measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Mains voltage: 230 V / 50 Hz - Rated working pressure: up to 10 bar - Cleaning capacity: 25 m³/h - Cleaning class: SA-3.0 – thorough and deep corrosion removal - Air consumption: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2–15 mm - Nozzle material: Tungsten carbide - Abrasive medium valve: MIKRO II - Viewing window size: 270 x 510 mm - Work table load capacity: up to 200 kg Bsdpfsrl R Dlex Agijcw - Operating temperature: 10 – 50 °C - Design: powder-coated steel, optional stainless steel

Sąlyga: naudotas, Gamybos metai: 2017, Pramoninis robotas, mokymo robotas Gamintojas: Kuka Tipas: KR3 R540 KRC4 Compact Metai: 2017/2018 Mažai darbo valandų! Mokymo, parodų, demonstracinė stotelė: 800 mm x 1.000 mm Darbo zona: 541 mm Svoris: 26 kg Keliamoji galia: 3 kg Kuka valdymas KRC4 Compact KUKA.SystemSoftware KSS SR Kuka SmartPad KCP4 Kuka jungiamasis kabelis 4 m Bcjdpfowpg Ndex Agiew

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking Bodpfxscggy Se Agiscw - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate Bcedpfx Agonxh T Roijw * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Sąlyga: naudotas, Gamybos metai: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm / 170–600 rpm Stroke speed, stepless hydraulic: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special equipment: - Integrated 2-station rotary table for accommodation of 2 workpieces, with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – demonstration ready Delivery: ex stock – as inspected Bsdpfx Ast Hwupegijcw Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock; please inquire with us.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 415 mm, tekėjimo ilgis: 850 mm, tekėjimo skersmuo: 390 mm, veleno skylė: 105 mm, veleno greitis (maks.): 2 000 aps./min, X ašies eiga: 225 mm, Z ašies eigos atstumas: 950 mm, greitas poslinkis X ašimi: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 1 980 mm, bendras ilgis: 4 600 mm, bendras plotis: 1 900 mm, quill skersmuo: 100 mm, plunksnos brūkšnys: 120 mm, bendras svoris: 7 000 kg, strypo praėjimas: 90 mm, įvorės išorinis skersmuo: 300 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 828D + Shopturn, Įranga: dokumentacija / vadovas, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2,000 rpm AC spindle motor SIEMENS (cont./15min): 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix interface for driven tools C-axis with spindle clamp and stabilization Bcsdpfofk Et Aox Agijw wide and sturdy flat guides 45° slant bed for optimal chip flow hinged belt chip conveyor with chip bin 3-jaw Kitagawa power chuck ø 300 mm manual swing-type tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Rittal filter fan on control cabinet

Sąlyga: geras (naudotas), Gamybos metai: 2012, rankos pasiekiamumas: 2 696 mm, valdiklio modelis: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data Maximum Reach: 2696 mm Rated Payload: 90 kg Rated Additional Load Carousel / Wrist / Arm: 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Position Repeatability (ISO 9283): -/+ 0.06 mm Number of Axes: 6 Mounting Position: Floor Installation Footprint: 830 mm x 830 mm Weight: approx. 1058 kg Axis Data Motion Range A1: -/+ 185 ° A2: -140 / -5 ° A3: -120 / 155 ° A4: -/+ 350 ° A5: -/+ 125 ° A6: -/+ 350 ° Speed at Rated Payload A1: 136 ° / s A2: 130 ° / s A3: 120 ° / s A4: 292 ° / s A5: 258 ° / s A6: 284 ° / s Operating Conditions Ambient Temperature During Operation: 10 °C to 55 °C (283 K to 328 K) Bcodpfjtpwxlox Agijw Controller: KR C4

Sąlyga: naujas, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and duty cycle deliver outstanding arc characteristics for industrial MIG/MAG applications. Integrated synergic controls make setup simple and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to ensure perfect quality. MULTIPROCESS Bcjdomxkdpopfx Agisw MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire (polarity reversal): Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.